Merge commit 'v2.6.39-rc4' into next

14 files changed, 71 insertions, 49 deletions

diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 6b2d441a7dd..cabd9e54863 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -653,7 +653,7 @@ config TOUCHSCREEN_TOUCHIT213
 
 config TOUCHSCREEN_TSC2005
         tristate "TSC2005 based touchscreens"
-        depends on SPI_MASTER
+        depends on SPI_MASTER && GENERIC_HARDIRQS
         help
           Say Y here if you have a TSC2005 based touchscreen.
 
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index b31e90f0d44..c24946f5125 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -946,28 +946,29 @@ static int __devinit ads7846_setup_pendown(struct spi_device *spi, struct ads784
         struct ads7846_platform_data *pdata = spi->dev.platform_data;
         int err;
 
-        /* REVISIT when the irq can be triggered active-low, or if for some
+        /*
+         * REVISIT when the irq can be triggered active-low, or if for some
          * reason the touchscreen isn't hooked up, we don't need to access
          * the pendown state.
          */
-        if (!pdata->get_pendown_state && !gpio_is_valid(pdata->gpio_pendown)) {
-                dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
-                return -EINVAL;
-        }
 
         if (pdata->get_pendown_state) {
                 ts->get_pendown_state = pdata->get_pendown_state;
-                return 0;
-        }
+        } else if (gpio_is_valid(pdata->gpio_pendown)) {
 
-        err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
-        if (err) {
-                dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
-                        pdata->gpio_pendown);
-                return err;
-        }
+                err = gpio_request(pdata->gpio_pendown, "ads7846_pendown");
+                if (err) {
+                        dev_err(&spi->dev, "failed to request pendown GPIO%d\n",
+                                pdata->gpio_pendown);
+                        return err;
+                }
 
-        ts->gpio_pendown = pdata->gpio_pendown;
+                ts->gpio_pendown = pdata->gpio_pendown;
+
+        } else {
+                dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
+                return -EINVAL;
+        }
 
         return 0;
 }
@@ -1358,7 +1359,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
  err_put_regulator:
         regulator_put(ts->reg);
  err_free_gpio:
-        if (ts->gpio_pendown != -1)
+        if (!ts->get_pendown_state)
                 gpio_free(ts->gpio_pendown);
  err_cleanup_filter:
         if (ts->filter_cleanup)
@@ -1388,8 +1389,13 @@ static int __devexit ads7846_remove(struct spi_device *spi)
         regulator_disable(ts->reg);
         regulator_put(ts->reg);
 
-        if (ts->gpio_pendown != -1)
+        if (!ts->get_pendown_state) {
+                /*
+                 * If we are not using specialized pendown method we must
+                 * have been relying on gpio we set up ourselves.
+                 */
                 gpio_free(ts->gpio_pendown);
+        }
 
         if (ts->filter_cleanup)
                 ts->filter_cleanup(ts->filter_data);
diff --git a/drivers/input/touchscreen/h3600_ts_input.c b/drivers/input/touchscreen/h3600_ts_input.c
index b4d7f63deff..45f93d0f559 100644
--- a/drivers/input/touchscreen/h3600_ts_input.c
+++ b/drivers/input/touchscreen/h3600_ts_input.c
@@ -62,7 +62,7 @@ MODULE_LICENSE("GPL");
         Programmer has no control over these numbers.
         TODO there are holes - specifically  1,7,0x0a
 */
-#define VERSION_ID              0       /* Get Version (request/respose) */
+#define VERSION_ID              0       /* Get Version (request/response) */
 #define KEYBD_ID                2       /* Keyboard (event) */
 #define TOUCHS_ID               3       /* Touch Screen (event)*/
 #define EEPROM_READ_ID          4       /* (request/response) */
@@ -399,31 +399,34 @@ static int h3600ts_connect(struct serio *serio, struct serio_driver *drv)
                         IRQF_SHARED | IRQF_DISABLED, "h3600_action", &ts->dev)) {
                 printk(KERN_ERR "h3600ts.c: Could not allocate Action Button IRQ!\n");
                 err = -EBUSY;
-                goto fail2;
+                goto fail1;
         }
 
         if (request_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, npower_button_handler,
                         IRQF_SHARED | IRQF_DISABLED, "h3600_suspend", &ts->dev)) {
                 printk(KERN_ERR "h3600ts.c: Could not allocate Power Button IRQ!\n");
                 err = -EBUSY;
-                goto fail3;
+                goto fail2;
         }
 
         serio_set_drvdata(serio, ts);
 
         err = serio_open(serio, drv);
         if (err)
-                return err;
+                goto fail3;
 
         //h3600_flite_control(1, 25);     /* default brightness */
-        input_register_device(ts->dev);
+        err = input_register_device(ts->dev);
+        if (err)
+                goto fail4;
 
         return 0;
 
-fail3:  free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev);
+fail4:  serio_close(serio);
+fail3:  serio_set_drvdata(serio, NULL);
+        free_irq(IRQ_GPIO_BITSY_NPOWER_BUTTON, ts->dev);
 fail2:  free_irq(IRQ_GPIO_BITSY_ACTION_BUTTON, ts->dev);
-fail1:  serio_set_drvdata(serio, NULL);
-        input_free_device(input_dev);
+fail1:  input_free_device(input_dev);
         kfree(ts);
         return err;
 }
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
index c0307b22d86..66c96bfc552 100644
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -542,7 +542,7 @@ static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev)
          * ADC power on, start, enable PENDET and set loop delay
          * ADC loop delay is set to 4.5 ms approximately
          * Loop delay more than this results in jitter in adc readings
-         * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET
+         * Setting loop delay to 0 (continuous loop) in MAXIM stops PENDET
          * interrupt generation sometimes.
          */
 
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
index b6b8b1c7ece..3242e707625 100644
--- a/drivers/input/touchscreen/mainstone-wm97xx.c
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -219,7 +219,7 @@ static int wm97xx_acc_startup(struct wm97xx *wm)
                 }
 
                 wm->pen_irq = gpio_to_irq(irq);
-                set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
+                irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
         } else /* pen irq not supported */
                 pen_int = 0;
 
diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c
index c8c136cf7bb..43031492d73 100644
--- a/drivers/input/touchscreen/tps6507x-ts.c
+++ b/drivers/input/touchscreen/tps6507x-ts.c
@@ -43,7 +43,6 @@ struct tps6507x_ts {
         struct input_dev        *input_dev;
         struct device           *dev;
         char                    phys[32];
-        struct workqueue_struct *wq;
         struct delayed_work     work;
         unsigned                polling;        /* polling is active */
         struct ts_event         tc;
@@ -220,8 +219,8 @@ done:
         poll = 1;
 
         if (poll) {
-                schd = queue_delayed_work(tsc->wq, &tsc->work,
-                                          msecs_to_jiffies(tsc->poll_period));
+                schd = schedule_delayed_work(&tsc->work,
+                                        msecs_to_jiffies(tsc->poll_period));
                 if (schd)
                         tsc->polling = 1;
                 else {
@@ -303,7 +302,6 @@ static int tps6507x_ts_probe(struct platform_device *pdev)
         tsc->input_dev = input_dev;
 
         INIT_DELAYED_WORK(&tsc->work, tps6507x_ts_handler);
-        tsc->wq = create_workqueue("TPS6507x Touchscreen");
 
         if (init_data) {
                 tsc->poll_period = init_data->poll_period;
@@ -325,8 +323,8 @@ static int tps6507x_ts_probe(struct platform_device *pdev)
         if (error)
                 goto err2;
 
-        schd = queue_delayed_work(tsc->wq, &tsc->work,
-                                  msecs_to_jiffies(tsc->poll_period));
+        schd = schedule_delayed_work(&tsc->work,
+                                     msecs_to_jiffies(tsc->poll_period));
 
         if (schd)
                 tsc->polling = 1;
@@ -341,7 +339,6 @@ static int tps6507x_ts_probe(struct platform_device *pdev)
 
 err2:
         cancel_delayed_work_sync(&tsc->work);
-        destroy_workqueue(tsc->wq);
         input_free_device(input_dev);
 err1:
         kfree(tsc);
@@ -357,7 +354,6 @@ static int __devexit tps6507x_ts_remove(struct platform_device *pdev)
         struct input_dev *input_dev = tsc->input_dev;
 
         cancel_delayed_work_sync(&tsc->work);
-        destroy_workqueue(tsc->wq);
 
         input_unregister_device(input_dev);
 
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
index 87420616efa..cbf0ff32267 100644
--- a/drivers/input/touchscreen/tsc2005.c
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -358,7 +358,7 @@ static void __tsc2005_enable(struct tsc2005 *ts)
         if (ts->esd_timeout && ts->set_reset) {
                 ts->last_valid_interrupt = jiffies;
                 schedule_delayed_work(&ts->esd_work,
-                                round_jiffies(jiffies +
+                                round_jiffies_relative(
                                         msecs_to_jiffies(ts->esd_timeout)));
         }
 
@@ -477,7 +477,14 @@ static void tsc2005_esd_work(struct work_struct *work)
         int error;
         u16 r;
 
-        mutex_lock(&ts->mutex);
+        if (!mutex_trylock(&ts->mutex)) {
+                /*
+                 * If the mutex is taken, it means that disable or enable is in
+                 * progress. In that case just reschedule the work. If the work
+                 * is not needed, it will be canceled by disable.
+                 */
+                goto reschedule;
+        }
 
         if (time_is_after_jiffies(ts->last_valid_interrupt +
                                   msecs_to_jiffies(ts->esd_timeout)))
@@ -510,11 +517,12 @@ static void tsc2005_esd_work(struct work_struct *work)
         tsc2005_start_scan(ts);
 
 out:
+        mutex_unlock(&ts->mutex);
+reschedule:
         /* re-arm the watchdog */
         schedule_delayed_work(&ts->esd_work,
-                              round_jiffies(jiffies +
+                              round_jiffies_relative(
                                         msecs_to_jiffies(ts->esd_timeout)));
-        mutex_unlock(&ts->mutex);
 }
 
 static int tsc2005_open(struct input_dev *input)
@@ -663,7 +671,7 @@ static int __devinit tsc2005_probe(struct spi_device *spi)
                 goto err_remove_sysfs;
         }
 
-        set_irq_wake(spi->irq, 1);
+        irq_set_irq_wake(spi->irq, 1);
         return 0;
 
 err_remove_sysfs:
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 028a5363eea..3b5b5df04dd 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -6,7 +6,7 @@
  *  Copyright:  MontaVista Software, Inc.
  *
  * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
- * If something doesnt work and it worked before spliting, e-mail me,
+ * If something doesn't work and it worked before spliting, e-mail me,
  * dont bother Nicolas please ;-)
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index 5cb8449c909..c14412ef464 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -51,6 +51,10 @@ MODULE_LICENSE("GPL");
 #define W8001_PKTLEN_TPCCTL     11      /* control packet */
 #define W8001_PKTLEN_TOUCH2FG   13
 
+/* resolution in points/mm */
+#define W8001_PEN_RESOLUTION    100
+#define W8001_TOUCH_RESOLUTION  10
+
 struct w8001_coord {
         u8 rdy;
         u8 tsw;
@@ -198,7 +202,7 @@ static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
                 query->y = 1024;
                 if (query->panel_res)
                         query->x = query->y = (1 << query->panel_res);
-                query->panel_res = 10;
+                query->panel_res = W8001_TOUCH_RESOLUTION;
         }
 }
 
@@ -394,6 +398,8 @@ static int w8001_setup(struct w8001 *w8001)
 
                 input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
                 input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+                input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
+                input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
                 input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
                 if (coord.tilt_x && coord.tilt_y) {
                         input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
@@ -418,14 +424,17 @@ static int w8001_setup(struct w8001 *w8001)
                 w8001->max_touch_x = touch.x;
                 w8001->max_touch_y = touch.y;
 
-                /* scale to pen maximum */
                 if (w8001->max_pen_x && w8001->max_pen_y) {
+                        /* if pen is supported scale to pen maximum */
                         touch.x = w8001->max_pen_x;
                         touch.y = w8001->max_pen_y;
+                        touch.panel_res = W8001_PEN_RESOLUTION;
                 }
 
                 input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
                 input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+                input_abs_set_res(dev, ABS_X, touch.panel_res);
+                input_abs_set_res(dev, ABS_Y, touch.panel_res);
 
                 switch (touch.sensor_id) {
                 case 0:
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
index 6b5be742c27..98e61175d3f 100644
--- a/drivers/input/touchscreen/wm9705.c
+++ b/drivers/input/touchscreen/wm9705.c
@@ -306,7 +306,7 @@ static int wm9705_acc_enable(struct wm97xx *wm, int enable)
         dig2 = wm->dig[2];
 
         if (enable) {
-                /* continous mode */
+                /* continuous mode */
                 if (wm->mach_ops->acc_startup &&
                     (ret = wm->mach_ops->acc_startup(wm)) < 0)
                         return ret;
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 7490b05c356..2bc2fb80100 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -419,7 +419,7 @@ static int wm9712_acc_enable(struct wm97xx *wm, int enable)
         dig2 = wm->dig[2];
 
         if (enable) {
-                /* continous mode */
+                /* continuous mode */
                 if (wm->mach_ops->acc_startup) {
                         ret = wm->mach_ops->acc_startup(wm);
                         if (ret < 0)
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 238b5132712..73ec99568f1 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -431,7 +431,7 @@ static int wm9713_acc_enable(struct wm97xx *wm, int enable)
         dig3 = wm->dig[2];
 
         if (enable) {
-                /* continous mode */
+                /* continuous mode */
                 if (wm->mach_ops->acc_startup &&
                         (ret = wm->mach_ops->acc_startup(wm)) < 0)
                         return ret;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 6b75c9f660a..5dbe73af2f8 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -335,7 +335,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
          */
         if (!wm->mach_ops->acc_enabled || wm->mach_ops->acc_pen_down) {
                 if (wm->pen_is_down && !pen_was_down) {
-                        /* Data is not availiable immediately on pen down */
+                        /* Data is not available immediately on pen down */
                         queue_delayed_work(wm->ts_workq, &wm->ts_reader, 1);
                 }
 
@@ -354,7 +354,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
  * Codec PENDOWN irq handler
  *
  * We have to disable the codec interrupt in the handler because it
- * can take upto 1ms to clear the interrupt source. We schedule a task
+ * can take up to 1ms to clear the interrupt source. We schedule a task
  * in a work queue to do the actual interaction with the chip.  The
  * interrupt is then enabled again in the slow handler when the source
  * has been cleared.
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index 04884986764..5b0f15ec874 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -193,7 +193,7 @@ static int zylonite_wm97xx_probe(struct platform_device *pdev)
                 gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26);
 
         wm->pen_irq = IRQ_GPIO(gpio_touch_irq);
-        set_irq_type(IRQ_GPIO(gpio_touch_irq), IRQ_TYPE_EDGE_BOTH);
+        irq_set_irq_type(IRQ_GPIO(gpio_touch_irq), IRQ_TYPE_EDGE_BOTH);
 
         wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
                            WM97XX_GPIO_POL_HIGH,