Merge branch 'x86/core' into core/percpu

1 files changed, 17 insertions, 0 deletions

diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c
index 77fae5f64f2..5558d932b4d 100644
--- a/arch/powerpc/sysdev/ppc4xx_pci.c
+++ b/arch/powerpc/sysdev/ppc4xx_pci.c
@@ -204,6 +204,23 @@ static int __init ppc4xx_setup_one_pci_PMM(struct pci_controller	*hose,
 {
         u32 ma, pcila, pciha;
 
+        /* Hack warning ! The "old" PCI 2.x cell only let us configure the low
+         * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit
+         * address are actually hard wired to a value that appears to depend
+         * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx.
+         *
+         * The trick here is we just crop those top bits and ignore them when
+         * programming the chip. That means the device-tree has to be right
+         * for the specific part used (we don't print a warning if it's wrong
+         * but on the other hand, you'll crash quickly enough), but at least
+         * this code should work whatever the hard coded value is
+         */
+        plb_addr &= 0xffffffffull;
+
+        /* Note: Due to the above hack, the test below doesn't actually test
+         * if you address is above 4G, but it tests that address and
+         * (address + size) are both contained in the same 4G
+         */
         if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) ||
             size < 0x1000 || (plb_addr & (size - 1)) != 0) {
                 printk(KERN_WARNING "%s: Resource out of range\n",