1 files changed, 126 insertions, 0 deletions

diff --git a/include/asm-arm/arch-omap/board.h b/include/asm-arm/arch-omap/board.h
new file mode 100644
index 00000000000..1cefd60b6f2
--- /dev/null
+++ b/include/asm-arm/arch-omap/board.h
@@ -0,0 +1,126 @@
+/*
+ *  linux/include/asm-arm/arch-omap/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004  Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/config.h>
+#include <linux/types.h>
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK          0x4f01
+#define OMAP_TAG_MMC            0x4f02
+#define OMAP_TAG_UART           0x4f03
+#define OMAP_TAG_USB            0x4f04
+#define OMAP_TAG_LCD            0x4f05
+#define OMAP_TAG_GPIO_SWITCH    0x4f06
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART     0x4f81
+
+struct omap_clock_config {
+        /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+        u8 system_clock_type;
+};
+
+struct omap_mmc_config {
+        u8 mmc_blocks;
+        s16 mmc1_power_pin, mmc2_power_pin;
+        s16 mmc1_switch_pin, mmc2_switch_pin;
+};
+
+struct omap_uart_config {
+        u8 console_uart;
+        u32 console_speed;
+};
+
+struct omap_usb_config {
+        /* Configure drivers according to the connectors on your board:
+         *  - "A" connector (rectagular)
+         *      ... for host/OHCI use, set "register_host".
+         *  - "B" connector (squarish) or "Mini-B"
+         *      ... for device/gadget use, set "register_dev".
+         *  - "Mini-AB" connector (very similar to Mini-B)
+         *      ... for OTG use as device OR host, initialize "otg"
+         */
+        unsigned        register_host:1;
+        unsigned        register_dev:1;
+        u8              otg;    /* port number, 1-based:  usb1 == 2 */
+
+        u8              hmc_mode;
+
+        /* implicitly true if otg:  host supports remote wakeup? */
+        u8              rwc;
+
+        /* signaling pins used to talk to transceiver on usbN:
+         *  0 == usbN unused
+         *  2 == usb0-only, using internal transceiver
+         *  3 == 3 wire bidirectional
+         *  4 == 4 wire bidirectional
+         *  6 == 6 wire unidirectional (or TLL)
+         */
+        u8              pins[3];
+};
+
+struct omap_lcd_config {
+        char panel_name[16];
+        char ctrl_name[16];
+};
+
+/* Cover:
+ *      high -> closed
+ *      low  -> open
+ * Connection:
+ *      high -> connected
+ *      low  -> disconnected
+ */
+#define OMAP_GPIO_SWITCH_TYPE_COVER             0x0000
+#define OMAP_GPIO_SWITCH_TYPE_CONNECTION        0x0001
+#define OMAP_GPIO_SWITCH_FLAG_INVERTED          0x0001
+struct omap_gpio_switch_config {
+        char name[12];
+        u16 gpio;
+        int flags:4;
+        int type:4;
+        int key_code:24; /* Linux key code */
+};
+
+struct omap_flash_part_config {
+        char part_table[0];
+};
+
+struct omap_boot_reason_config {
+        char reason_str[12];
+};
+
+
+struct omap_board_config_entry {
+        u16 tag;
+        u16 len;
+        u8  data[0];
+};
+
+struct omap_board_config_kernel {
+        u16 tag;
+        const void *data;
+};
+
+extern const void *__omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+        ((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+        ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+#endif