10 files changed, 89 insertions, 90 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 5ac27ed0c63..497dbb29744 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -3037,7 +3037,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
 
                 /* maybe switch power back on (e.g. root hub was reset) */
                 if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
-                                && !(portstatus & (1 << USB_PORT_FEAT_POWER)))
+                                && !(portstatus & USB_PORT_STAT_POWER))
                         set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
 
                 if (portstatus & USB_PORT_STAT_ENABLE)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index c7178bcde67..c44018109a1 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -659,7 +659,7 @@ static int ehci_hub_control (
                  * Even if OWNER is set, so the port is owned by the
                  * companion controller, khubd needs to be able to clear
                  * the port-change status bits (especially
-                 * USB_PORT_FEAT_C_CONNECTION).
+                 * USB_PORT_STAT_C_CONNECTION).
                  */
 
                 switch (wValue) {
@@ -729,12 +729,12 @@ static int ehci_hub_control (
 
                 // wPortChange bits
                 if (temp & PORT_CSC)
-                        status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+                        status |= USB_PORT_STAT_C_CONNECTION << 16;
                 if (temp & PORT_PEC)
-                        status |= 1 << USB_PORT_FEAT_C_ENABLE;
+                        status |= USB_PORT_STAT_C_ENABLE << 16;
 
                 if ((temp & PORT_OCC) && !ignore_oc){
-                        status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+                        status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 
                         /*
                          * Hubs should disable port power on over-current.
@@ -791,7 +791,7 @@ static int ehci_hub_control (
                 if ((temp & PORT_RESET)
                                 && time_after_eq(jiffies,
                                         ehci->reset_done[wIndex])) {
-                        status |= 1 << USB_PORT_FEAT_C_RESET;
+                        status |= USB_PORT_STAT_C_RESET << 16;
                         ehci->reset_done [wIndex] = 0;
 
                         /* force reset to complete */
@@ -833,7 +833,7 @@ static int ehci_hub_control (
                  */
 
                 if (temp & PORT_CONNECT) {
-                        status |= 1 << USB_PORT_FEAT_CONNECTION;
+                        status |= USB_PORT_STAT_CONNECTION;
                         // status may be from integrated TT
                         if (ehci->has_hostpc) {
                                 temp1 = ehci_readl(ehci, hostpc_reg);
@@ -842,11 +842,11 @@ static int ehci_hub_control (
                                 status |= ehci_port_speed(ehci, temp);
                 }
                 if (temp & PORT_PE)
-                        status |= 1 << USB_PORT_FEAT_ENABLE;
+                        status |= USB_PORT_STAT_ENABLE;
 
                 /* maybe the port was unsuspended without our knowledge */
                 if (temp & (PORT_SUSPEND|PORT_RESUME)) {
-                        status |= 1 << USB_PORT_FEAT_SUSPEND;
+                        status |= USB_PORT_STAT_SUSPEND;
                 } else if (test_bit(wIndex, &ehci->suspended_ports)) {
                         clear_bit(wIndex, &ehci->suspended_ports);
                         ehci->reset_done[wIndex] = 0;
@@ -855,13 +855,13 @@ static int ehci_hub_control (
                 }
 
                 if (temp & PORT_OC)
-                        status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+                        status |= USB_PORT_STAT_OVERCURRENT;
                 if (temp & PORT_RESET)
-                        status |= 1 << USB_PORT_FEAT_RESET;
+                        status |= USB_PORT_STAT_RESET;
                 if (temp & PORT_POWER)
-                        status |= 1 << USB_PORT_FEAT_POWER;
+                        status |= USB_PORT_STAT_POWER;
                 if (test_bit(wIndex, &ehci->port_c_suspend))
-                        status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+                        status |= USB_PORT_STAT_C_SUSPEND << 16;
 
 #ifndef VERBOSE_DEBUG
         if (status & ~0xffff)   /* only if wPortChange is interesting */
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index acc157da727..6a6a50849bf 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -1265,7 +1265,7 @@ static int isp1362_urb_enqueue(struct usb_hcd *hcd,
 
         /* don't submit to a dead or disabled port */
         if (!((isp1362_hcd->rhport[0] | isp1362_hcd->rhport[1]) &
-              (1 << USB_PORT_FEAT_ENABLE)) ||
+              USB_PORT_STAT_ENABLE) ||
             !HC_IS_RUNNING(hcd->state)) {
                 kfree(ep);
                 retval = -ENODEV;
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index cfdac6da955..13f7d1200bc 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1923,7 +1923,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
                  * Even if OWNER is set, so the port is owned by the
                  * companion controller, khubd needs to be able to clear
                  * the port-change status bits (especially
-                 * USB_PORT_FEAT_C_CONNECTION).
+                 * USB_PORT_STAT_C_CONNECTION).
                  */
 
                 switch (wValue) {
@@ -1987,7 +1987,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
 
                 /* wPortChange bits */
                 if (temp & PORT_CSC)
-                        status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+                        status |= USB_PORT_STAT_C_CONNECTION << 16;
 
 
                 /* whoever resumes must GetPortStatus to complete it!! */
@@ -2007,7 +2007,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
                         /* resume completed? */
                         else if (time_after_eq(jiffies,
                                         priv->reset_done)) {
-                                status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+                                status |= USB_PORT_STAT_C_SUSPEND << 16;
                                 priv->reset_done = 0;
 
                                 /* stop resume signaling */
@@ -2031,7 +2031,7 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
                 if ((temp & PORT_RESET)
                                 && time_after_eq(jiffies,
                                         priv->reset_done)) {
-                        status |= 1 << USB_PORT_FEAT_C_RESET;
+                        status |= USB_PORT_STAT_C_RESET << 16;
                         priv->reset_done = 0;
 
                         /* force reset to complete */
@@ -2062,18 +2062,18 @@ static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
                         printk(KERN_ERR "Warning: PORT_OWNER is set\n");
 
                 if (temp & PORT_CONNECT) {
-                        status |= 1 << USB_PORT_FEAT_CONNECTION;
+                        status |= USB_PORT_STAT_CONNECTION;
                         /* status may be from integrated TT */
                         status |= ehci_port_speed(priv, temp);
                 }
                 if (temp & PORT_PE)
-                        status |= 1 << USB_PORT_FEAT_ENABLE;
+                        status |= USB_PORT_STAT_ENABLE;
                 if (temp & (PORT_SUSPEND|PORT_RESUME))
-                        status |= 1 << USB_PORT_FEAT_SUSPEND;
+                        status |= USB_PORT_STAT_SUSPEND;
                 if (temp & PORT_RESET)
-                        status |= 1 << USB_PORT_FEAT_RESET;
+                        status |= USB_PORT_STAT_RESET;
                 if (temp & PORT_POWER)
-                        status |= 1 << USB_PORT_FEAT_POWER;
+                        status |= USB_PORT_STAT_POWER;
 
                 put_unaligned(cpu_to_le32(status), (__le32 *) buf);
                 break;
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 8f04c0afa59..f608dfd09a8 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3201,7 +3201,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
                  * Even if OWNER is set, so the port is owned by the
                  * companion controller, khubd needs to be able to clear
                  * the port-change status bits (especially
-                 * USB_PORT_FEAT_C_CONNECTION).
+                 * USB_PORT_STAT_C_CONNECTION).
                  */
 
                 switch (wValue) {
@@ -3263,11 +3263,11 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
 
                 /* wPortChange bits */
                 if (temp & PORT_CSC)
-                        status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+                        status |= USB_PORT_STAT_C_CONNECTION << 16;
                 if (temp & PORT_PEC)
-                        status |= 1 << USB_PORT_FEAT_C_ENABLE;
+                        status |= USB_PORT_STAT_C_ENABLE << 16;
                 if ((temp & PORT_OCC) && !ignore_oc)
-                        status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+                        status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 
                 /* whoever resumes must GetPortStatus to complete it!! */
                 if (temp & PORT_RESUME) {
@@ -3285,7 +3285,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
                         /* resume completed? */
                         else if (time_after_eq(jiffies,
                                         oxu->reset_done[wIndex])) {
-                                status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+                                status |= USB_PORT_STAT_C_SUSPEND << 16;
                                 oxu->reset_done[wIndex] = 0;
 
                                 /* stop resume signaling */
@@ -3308,7 +3308,7 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
                 if ((temp & PORT_RESET)
                                 && time_after_eq(jiffies,
                                         oxu->reset_done[wIndex])) {
-                        status |= 1 << USB_PORT_FEAT_C_RESET;
+                        status |= USB_PORT_STAT_C_RESET << 16;
                         oxu->reset_done[wIndex] = 0;
 
                         /* force reset to complete */
@@ -3347,20 +3347,20 @@ static int oxu_hub_control(struct usb_hcd *hcd, u16 typeReq,
                  */
 
                 if (temp & PORT_CONNECT) {
-                        status |= 1 << USB_PORT_FEAT_CONNECTION;
+                        status |= USB_PORT_STAT_CONNECTION;
                         /* status may be from integrated TT */
                         status |= oxu_port_speed(oxu, temp);
                 }
                 if (temp & PORT_PE)
-                        status |= 1 << USB_PORT_FEAT_ENABLE;
+                        status |= USB_PORT_STAT_ENABLE;
                 if (temp & (PORT_SUSPEND|PORT_RESUME))
-                        status |= 1 << USB_PORT_FEAT_SUSPEND;
+                        status |= USB_PORT_STAT_SUSPEND;
                 if (temp & PORT_OC)
-                        status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+                        status |= USB_PORT_STAT_OVERCURRENT;
                 if (temp & PORT_RESET)
-                        status |= 1 << USB_PORT_FEAT_RESET;
+                        status |= USB_PORT_STAT_RESET;
                 if (temp & PORT_POWER)
-                        status |= 1 << USB_PORT_FEAT_POWER;
+                        status |= USB_PORT_STAT_POWER;
 
 #ifndef OXU_VERBOSE_DEBUG
         if (status & ~0xffff)   /* only if wPortChange is interesting */
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index a004a122084..6db57ab6079 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -1018,10 +1018,10 @@ static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port,
         rh->old_syssts = r8a66597_read(r8a66597, get_syssts_reg(port)) & LNST;
         rh->scount = R8A66597_MAX_SAMPLING;
         if (connect)
-                rh->port |= 1 << USB_PORT_FEAT_CONNECTION;
+                rh->port |= USB_PORT_STAT_CONNECTION;
         else
-                rh->port &= ~(1 << USB_PORT_FEAT_CONNECTION);
-        rh->port |= 1 << USB_PORT_FEAT_C_CONNECTION;
+                rh->port &= ~USB_PORT_STAT_CONNECTION;
+        rh->port |= USB_PORT_STAT_C_CONNECTION << 16;
 
         r8a66597_root_hub_start_polling(r8a66597);
 }
@@ -1065,8 +1065,8 @@ static void r8a66597_usb_connect(struct r8a66597 *r8a66597, int port)
         else if (speed == LSMODE)
                 rh->port |= USB_PORT_STAT_LOW_SPEED;
 
-        rh->port &= ~(1 << USB_PORT_FEAT_RESET);
-        rh->port |= 1 << USB_PORT_FEAT_ENABLE;
+        rh->port &= USB_PORT_STAT_RESET;
+        rh->port |= USB_PORT_STAT_ENABLE;
 }
 
 /* this function must be called with interrupt disabled */
@@ -1705,7 +1705,7 @@ static void r8a66597_root_hub_control(struct r8a66597 *r8a66597, int port)
         u16 tmp;
         struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
 
-        if (rh->port & (1 << USB_PORT_FEAT_RESET)) {
+        if (rh->port & USB_PORT_STAT_RESET) {
                 unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
                 tmp = r8a66597_read(r8a66597, dvstctr_reg);
@@ -1717,7 +1717,7 @@ static void r8a66597_root_hub_control(struct r8a66597 *r8a66597, int port)
                         r8a66597_usb_connect(r8a66597, port);
         }
 
-        if (!(rh->port & (1 << USB_PORT_FEAT_CONNECTION))) {
+        if (!(rh->port & USB_PORT_STAT_CONNECTION)) {
                 r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port));
                 r8a66597_bset(r8a66597, ATTCHE, get_intenb_reg(port));
         }
@@ -2185,7 +2185,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
                 switch (wValue) {
                 case USB_PORT_FEAT_ENABLE:
-                        rh->port &= ~(1 << USB_PORT_FEAT_POWER);
+                        rh->port &= ~USB_PORT_STAT_POWER;
                         break;
                 case USB_PORT_FEAT_SUSPEND:
                         break;
@@ -2226,12 +2226,12 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                         break;
                 case USB_PORT_FEAT_POWER:
                         r8a66597_port_power(r8a66597, port, 1);
-                        rh->port |= (1 << USB_PORT_FEAT_POWER);
+                        rh->port |= USB_PORT_STAT_POWER;
                         break;
                 case USB_PORT_FEAT_RESET: {
                         struct r8a66597_device *dev = rh->dev;
 
-                        rh->port |= (1 << USB_PORT_FEAT_RESET);
+                        rh->port |= USB_PORT_STAT_RESET;
 
                         disable_r8a66597_pipe_all(r8a66597, dev);
                         free_usb_address(r8a66597, dev, 1);
@@ -2269,12 +2269,12 @@ static int r8a66597_bus_suspend(struct usb_hcd *hcd)
                 struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
                 unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
-                if (!(rh->port & (1 << USB_PORT_FEAT_ENABLE)))
+                if (!(rh->port & USB_PORT_STAT_ENABLE))
                         continue;
 
                 dbg("suspend port = %d", port);
                 r8a66597_bclr(r8a66597, UACT, dvstctr_reg);     /* suspend */
-                rh->port |= 1 << USB_PORT_FEAT_SUSPEND;
+                rh->port |= USB_PORT_STAT_SUSPEND;
 
                 if (rh->dev->udev->do_remote_wakeup) {
                         msleep(3);      /* waiting last SOF */
@@ -2300,12 +2300,12 @@ static int r8a66597_bus_resume(struct usb_hcd *hcd)
                 struct r8a66597_root_hub *rh = &r8a66597->root_hub[port];
                 unsigned long dvstctr_reg = get_dvstctr_reg(port);
 
-                if (!(rh->port & (1 << USB_PORT_FEAT_SUSPEND)))
+                if (!(rh->port & USB_PORT_STAT_SUSPEND))
                         continue;
 
                 dbg("resume port = %d", port);
-                rh->port &= ~(1 << USB_PORT_FEAT_SUSPEND);
-                rh->port |= 1 << USB_PORT_FEAT_C_SUSPEND;
+                rh->port &= ~USB_PORT_STAT_SUSPEND;
+                rh->port |= USB_PORT_STAT_C_SUSPEND < 16;
                 r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg);
                 msleep(50);
                 r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg);
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index dcd7fab7179..bcf9f0e809d 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -90,10 +90,10 @@ static void port_power(struct sl811 *sl811, int is_on)
 
         /* hub is inactive unless the port is powered */
         if (is_on) {
-                if (sl811->port1 & (1 << USB_PORT_FEAT_POWER))
+                if (sl811->port1 & USB_PORT_STAT_POWER)
                         return;
 
-                sl811->port1 = (1 << USB_PORT_FEAT_POWER);
+                sl811->port1 = USB_PORT_STAT_POWER;
                 sl811->irq_enable = SL11H_INTMASK_INSRMV;
         } else {
                 sl811->port1 = 0;
@@ -407,7 +407,7 @@ static struct sl811h_ep	*start(struct sl811 *sl811, u8 bank)
 
 static inline void start_transfer(struct sl811 *sl811)
 {
-        if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND))
+        if (sl811->port1 & USB_PORT_STAT_SUSPEND)
                 return;
         if (sl811->active_a == NULL) {
                 sl811->active_a = start(sl811, SL811_EP_A(SL811_HOST_BUF));
@@ -721,23 +721,23 @@ retry:
                  * force the reset and make khubd clean up later.
                  */
                 if (irqstat & SL11H_INTMASK_RD)
-                        sl811->port1 &= ~(1 << USB_PORT_FEAT_CONNECTION);
+                        sl811->port1 &= ~USB_PORT_STAT_CONNECTION;
                 else
-                        sl811->port1 |= 1 << USB_PORT_FEAT_CONNECTION;
+                        sl811->port1 |= USB_PORT_STAT_CONNECTION;
 
-                sl811->port1 |= 1 << USB_PORT_FEAT_C_CONNECTION;
+                sl811->port1 |= USB_PORT_STAT_C_CONNECTION << 16;
 
         } else if (irqstat & SL11H_INTMASK_RD) {
-                if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)) {
+                if (sl811->port1 & USB_PORT_STAT_SUSPEND) {
                         DBG("wakeup\n");
-                        sl811->port1 |= 1 << USB_PORT_FEAT_C_SUSPEND;
+                        sl811->port1 |= USB_PORT_STAT_C_SUSPEND << 16;
                         sl811->stat_wake++;
                 } else
                         irqstat &= ~SL11H_INTMASK_RD;
         }
 
         if (irqstat) {
-                if (sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
+                if (sl811->port1 & USB_PORT_STAT_ENABLE)
                         start_transfer(sl811);
                 ret = IRQ_HANDLED;
                 if (retries--)
@@ -819,7 +819,7 @@ static int sl811h_urb_enqueue(
         spin_lock_irqsave(&sl811->lock, flags);
 
         /* don't submit to a dead or disabled port */
-        if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE))
+        if (!(sl811->port1 & USB_PORT_STAT_ENABLE)
                         || !HC_IS_RUNNING(hcd->state)) {
                 retval = -ENODEV;
                 kfree(ep);
@@ -1119,8 +1119,8 @@ sl811h_timer(unsigned long _sl811)
         unsigned long   flags;
         u8              irqstat;
         u8              signaling = sl811->ctrl1 & SL11H_CTL1MASK_FORCE;
-        const u32       mask = (1 << USB_PORT_FEAT_CONNECTION)
-                                | (1 << USB_PORT_FEAT_ENABLE)
+        const u32       mask = USB_PORT_STAT_CONNECTION
+                                | USB_PORT_STAT_ENABLE
                                 | USB_PORT_STAT_LOW_SPEED;
 
         spin_lock_irqsave(&sl811->lock, flags);
@@ -1135,8 +1135,8 @@ sl811h_timer(unsigned long _sl811)
         switch (signaling) {
         case SL11H_CTL1MASK_SE0:
                 DBG("end reset\n");
-                sl811->port1 = (1 << USB_PORT_FEAT_C_RESET)
-                                | (1 << USB_PORT_FEAT_POWER);
+                sl811->port1 = (USB_PORT_STAT_C_RESET << 16)
+                                 | USB_PORT_STAT_POWER;
                 sl811->ctrl1 = 0;
                 /* don't wrongly ack RD */
                 if (irqstat & SL11H_INTMASK_INSRMV)
@@ -1144,7 +1144,7 @@ sl811h_timer(unsigned long _sl811)
                 break;
         case SL11H_CTL1MASK_K:
                 DBG("end resume\n");
-                sl811->port1 &= ~(1 << USB_PORT_FEAT_SUSPEND);
+                sl811->port1 &= ~USB_PORT_STAT_SUSPEND;
                 break;
         default:
                 DBG("odd timer signaling: %02x\n", signaling);
@@ -1154,9 +1154,9 @@ sl811h_timer(unsigned long _sl811)
 
         if (irqstat & SL11H_INTMASK_RD) {
                 /* usbcore nukes all pending transactions on disconnect */
-                if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION))
-                        sl811->port1 |= (1 << USB_PORT_FEAT_C_CONNECTION)
-                                        | (1 << USB_PORT_FEAT_C_ENABLE);
+                if (sl811->port1 & USB_PORT_STAT_CONNECTION)
+                        sl811->port1 |= (USB_PORT_STAT_C_CONNECTION << 16)
+                                        | (USB_PORT_STAT_C_ENABLE << 16);
                 sl811->port1 &= ~mask;
                 sl811->irq_enable = SL11H_INTMASK_INSRMV;
         } else {
@@ -1166,7 +1166,7 @@ sl811h_timer(unsigned long _sl811)
                 sl811->irq_enable = SL11H_INTMASK_INSRMV | SL11H_INTMASK_RD;
         }
 
-        if (sl811->port1 & (1 << USB_PORT_FEAT_CONNECTION)) {
+        if (sl811->port1 & USB_PORT_STAT_CONNECTION) {
                 u8      ctrl2 = SL811HS_CTL2_INIT;
 
                 sl811->irq_enable |= SL11H_INTMASK_DONE_A;
@@ -1233,7 +1233,7 @@ sl811h_hub_control(
 
                 switch (wValue) {
                 case USB_PORT_FEAT_ENABLE:
-                        sl811->port1 &= (1 << USB_PORT_FEAT_POWER);
+                        sl811->port1 &= USB_PORT_STAT_POWER;
                         sl811->ctrl1 = 0;
                         sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
                         sl811->irq_enable = SL11H_INTMASK_INSRMV;
@@ -1241,7 +1241,7 @@ sl811h_hub_control(
                                                 sl811->irq_enable);
                         break;
                 case USB_PORT_FEAT_SUSPEND:
-                        if (!(sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND)))
+                        if (!(sl811->port1 & USB_PORT_STAT_SUSPEND))
                                 break;
 
                         /* 20 msec of resume/K signaling, other irqs blocked */
@@ -1290,9 +1290,9 @@ sl811h_hub_control(
                         goto error;
                 switch (wValue) {
                 case USB_PORT_FEAT_SUSPEND:
-                        if (sl811->port1 & (1 << USB_PORT_FEAT_RESET))
+                        if (sl811->port1 & USB_PORT_STAT_RESET)
                                 goto error;
-                        if (!(sl811->port1 & (1 << USB_PORT_FEAT_ENABLE)))
+                        if (!(sl811->port1 & USB_PORT_STAT_ENABLE))
                                 goto error;
 
                         DBG("suspend...\n");
@@ -1303,9 +1303,9 @@ sl811h_hub_control(
                         port_power(sl811, 1);
                         break;
                 case USB_PORT_FEAT_RESET:
-                        if (sl811->port1 & (1 << USB_PORT_FEAT_SUSPEND))
+                        if (sl811->port1 & USB_PORT_STAT_SUSPEND)
                                 goto error;
-                        if (!(sl811->port1 & (1 << USB_PORT_FEAT_POWER)))
+                        if (!(sl811->port1 & USB_PORT_STAT_POWER))
                                 break;
 
                         /* 50 msec of reset/SE0 signaling, irqs blocked */
@@ -1314,7 +1314,7 @@ sl811h_hub_control(
                                                 sl811->irq_enable);
                         sl811->ctrl1 = SL11H_CTL1MASK_SE0;
                         sl811_write(sl811, SL11H_CTLREG1, sl811->ctrl1);
-                        sl811->port1 |= (1 << USB_PORT_FEAT_RESET);
+                        sl811->port1 |= USB_PORT_STAT_RESET;
                         mod_timer(&sl811->timer, jiffies
                                         + msecs_to_jiffies(50));
                         break;
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index dd69df1e455..325b47a267b 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -205,27 +205,27 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
                 /* wPortChange bits */
                 if (temp & PORT_CSC)
-                        status |= 1 << USB_PORT_FEAT_C_CONNECTION;
+                        status |= USB_PORT_STAT_C_CONNECTION << 16;
                 if (temp & PORT_PEC)
-                        status |= 1 << USB_PORT_FEAT_C_ENABLE;
+                        status |= USB_PORT_STAT_C_ENABLE << 16;
                 if ((temp & PORT_OCC))
-                        status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
+                        status |= USB_PORT_STAT_C_OVERCURRENT << 16;
                 /*
                  * FIXME ignoring suspend, reset, and USB 2.1/3.0 specific
                  * changes
                  */
                 if (temp & PORT_CONNECT) {
-                        status |= 1 << USB_PORT_FEAT_CONNECTION;
+                        status |= USB_PORT_STAT_CONNECTION;
                         status |= xhci_port_speed(temp);
                 }
                 if (temp & PORT_PE)
-                        status |= 1 << USB_PORT_FEAT_ENABLE;
+                        status |= USB_PORT_STAT_ENABLE;
                 if (temp & PORT_OC)
-                        status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+                        status |= USB_PORT_STAT_OVERCURRENT;
                 if (temp & PORT_RESET)
-                        status |= 1 << USB_PORT_FEAT_RESET;
+                        status |= USB_PORT_STAT_RESET;
                 if (temp & PORT_POWER)
-                        status |= 1 << USB_PORT_FEAT_POWER;
+                        status |= USB_PORT_STAT_POWER;
                 xhci_dbg(xhci, "Get port status returned 0x%x\n", status);
                 put_unaligned(cpu_to_le32(status), (__le32 *) buf);
                 break;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 705cc4ad873..ced6d9ea9af 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -353,8 +353,7 @@ void musb_hnp_stop(struct musb *musb)
          * which cause occasional OPT A "Did not receive reset after connect"
          * errors.
          */
-        musb->port1_status &=
-                ~(1 << USB_PORT_FEAT_C_CONNECTION);
+        musb->port1_status &= ~(USB_PORT_STAT_C_CONNECTION << 16);
 }
 
 #endif
@@ -530,8 +529,8 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
                                 musb_writeb(mbase, MUSB_DEVCTL, devctl);
                         } else {
                                 musb->port1_status |=
-                                          (1 << USB_PORT_FEAT_OVER_CURRENT)
-                                        | (1 << USB_PORT_FEAT_C_OVER_CURRENT);
+                                          USB_PORT_STAT_OVERCURRENT
+                                        | (USB_PORT_STAT_C_OVERCURRENT << 16);
                         }
                         break;
                 default:
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 7775e1c0a21..92e85e027cf 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -183,8 +183,8 @@ static void musb_port_reset(struct musb *musb, bool do_reset)
 
 void musb_root_disconnect(struct musb *musb)
 {
-        musb->port1_status = (1 << USB_PORT_FEAT_POWER)
-                        | (1 << USB_PORT_FEAT_C_CONNECTION);
+        musb->port1_status = USB_PORT_STAT_POWER
+                        | (USB_PORT_STAT_C_CONNECTION << 16);
 
         usb_hcd_poll_rh_status(musb_to_hcd(musb));
         musb->is_active = 0;