19 files changed, 45 insertions, 42 deletions

diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
index 8aa81c9ac2f..e7a1e14f8b0 100644
--- a/drivers/input/keyboard/hilkbd.c
+++ b/drivers/input/keyboard/hilkbd.c
@@ -278,11 +278,11 @@ static int __init
 hil_init_chip(struct parisc_device *dev)
 {
         if (!dev->irq) {
-                printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa);
+                printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start);
                 return -ENODEV;
         }
 
-        hil_base = dev->hpa;
+        hil_base = dev->hpa.start;
         hil_irq  = dev->irq;
         hil_dev.dev_id = dev;
         
diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c
index 4bad2810190..9790d7169a5 100644
--- a/drivers/input/serio/gscps2.c
+++ b/drivers/input/serio/gscps2.c
@@ -331,7 +331,7 @@ static int __init gscps2_probe(struct parisc_device *dev)
 {
         struct gscps2port *ps2port;
         struct serio *serio;
-        unsigned long hpa = dev->hpa;
+        unsigned long hpa = dev->hpa.start;
         int ret;
 
         if (!dev->irq)
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 045b9a7a9db..a10348bb25e 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -875,9 +875,9 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d)
         hp_sdc.dev              = d;
         hp_sdc.irq              = d->irq;
         hp_sdc.nmi              = d->aux_irq;
-        hp_sdc.base_io          = d->hpa;
-        hp_sdc.data_io          = d->hpa + 0x800;
-        hp_sdc.status_io        = d->hpa + 0x801;
+        hp_sdc.base_io          = d->hpa.start;
+        hp_sdc.data_io          = d->hpa.start + 0x800;
+        hp_sdc.status_io        = d->hpa.start + 0x801;
 
         return hp_sdc_init();
 }
diff --git a/drivers/net/lasi_82596.c b/drivers/net/lasi_82596.c
index 180e526a204..a63d8a317d9 100644
--- a/drivers/net/lasi_82596.c
+++ b/drivers/net/lasi_82596.c
@@ -1528,17 +1528,18 @@ lan_init_chip(struct parisc_device *dev)
         
         if (!dev->irq) {
                 printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
-                        __FILE__, dev->hpa);
+                        __FILE__, dev->hpa.start);
                 return -ENODEV;
         }
 
-        printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa, dev->irq);
+        printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n", dev->hpa.start,
+                        dev->irq);
 
         netdevice = alloc_etherdev(0);
         if (!netdevice)
                 return -ENOMEM;
 
-        netdevice->base_addr = dev->hpa;
+        netdevice->base_addr = dev->hpa.start;
         netdevice->irq = dev->irq;
 
         retval = i82596_probe(netdevice, &dev->dev);
diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c
index 52f37b42431..558420bc9f8 100644
--- a/drivers/parisc/asp.c
+++ b/drivers/parisc/asp.c
@@ -77,12 +77,12 @@ asp_init_chip(struct parisc_device *dev)
         struct gsc_irq gsc_irq;
         int ret;
 
-        asp.version = gsc_readb(dev->hpa + ASP_VER_OFFSET) & 0xf;
+        asp.version = gsc_readb(dev->hpa.start + ASP_VER_OFFSET) & 0xf;
         asp.name = (asp.version == 1) ? "Asp" : "Cutoff";
         asp.hpa = ASP_INTERRUPT_ADDR;
 
         printk(KERN_INFO "%s version %d at 0x%lx found.\n", 
-                asp.name, asp.version, dev->hpa);
+                asp.name, asp.version, dev->hpa.start);
 
         /* the IRQ ASP should use */
         ret = -EBUSY;
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 2bb1889c4c4..80d0927dc8a 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -1546,7 +1546,7 @@ static int ccio_probe(struct parisc_device *dev)
 
         ioc->name = dev->id.hversion == U2_IOA_RUNWAY ? "U2" : "UTurn";
 
-        printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa);
+        printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name, dev->hpa.start);
 
         for (i = 0; i < ioc_count; i++) {
                 ioc_p = &(*ioc_p)->next;
@@ -1554,7 +1554,7 @@ static int ccio_probe(struct parisc_device *dev)
         *ioc_p = ioc;
 
         ioc->hw_path = dev->hw_path;
-        ioc->ioc_hpa = (struct ioa_registers *)dev->hpa;
+        ioc->ioc_regs = ioremap(dev->hpa.start, 4096);
         ccio_ioc_init(ioc);
         ccio_init_resources(ioc);
         hppa_dma_ops = &ccio_ops;
diff --git a/drivers/parisc/ccio-rm-dma.c b/drivers/parisc/ccio-rm-dma.c
index 57e6385976e..356b8357bcc 100644
--- a/drivers/parisc/ccio-rm-dma.c
+++ b/drivers/parisc/ccio-rm-dma.c
@@ -167,7 +167,7 @@ ccio_probe(struct parisc_device *dev)
 {
         printk(KERN_INFO "%s found %s at 0x%lx\n", MODULE_NAME,
                         dev->id.hversion == U2_BC_GSC ? "U2" : "UTurn",
-                        dev->hpa);
+                        dev->hpa.start);
 
 /*
 ** FIXME - should check U2 registers to verify it's really running
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 8c61705e67a..37820b0ae5e 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -902,15 +902,15 @@ void ccio_cujo20_fixup(struct parisc_device *dev, u32 iovp);
 ** If so, initialize the chip appropriately (card-mode vs bridge mode).
 ** Much of the initialization is common though.
 */
-static int __init
-dino_driver_callback(struct parisc_device *dev)
+static int __init dino_probe(struct parisc_device *dev)
 {
         struct dino_device *dino_dev;   // Dino specific control struct
         const char *version = "unknown";
         char *name;
         int is_cujo = 0;
         struct pci_bus *bus;
-        
+        unsigned long hpa = dev->hpa.start;
+
         name = "Dino";
         if (is_card_dino(&dev->id)) {
                 version = "3.x (card mode)";
diff --git a/drivers/parisc/eisa.c b/drivers/parisc/eisa.c
index 0afeedddf53..6362bf99eff 100644
--- a/drivers/parisc/eisa.c
+++ b/drivers/parisc/eisa.c
@@ -315,7 +315,7 @@ static int __devinit eisa_probe(struct parisc_device *dev)
         char *name = is_mongoose(dev) ? "Mongoose" : "Wax";
 
         printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n", 
-                name, dev->hpa);
+                name, dev->hpa.start);
 
         eisa_dev.hba.dev = dev;
         eisa_dev.hba.iommu = ccio_get_iommu(dev);
diff --git a/drivers/parisc/hppb.c b/drivers/parisc/hppb.c
index a6eae3e7c0c..5edf93f8075 100644
--- a/drivers/parisc/hppb.c
+++ b/drivers/parisc/hppb.c
@@ -68,14 +68,14 @@ static int hppb_probe(struct parisc_device *dev)
                 memset(card->next, '\0', sizeof(struct hppb_card));
                 card = card->next;
         }
-        printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa);
+        printk(KERN_INFO "Found GeckoBoa at 0x%lx\n", dev->hpa.start);
 
-        card->hpa = dev->hpa;
+        card->hpa = dev->hpa.start;
         card->mmio_region.name = "HP-PB Bus";
         card->mmio_region.flags = IORESOURCE_MEM;
 
-        card->mmio_region.start = __raw_readl(dev->hpa + IO_IO_LOW);
-        card->mmio_region.end = __raw_readl(dev->hpa + IO_IO_HIGH) - 1;
+        card->mmio_region.start = gsc_readl(dev->hpa.start + IO_IO_LOW);
+        card->mmio_region.end = gsc_readl(dev->hpa.start + IO_IO_HIGH) - 1;
 
         status = ccio_request_resource(dev, &card->mmio_region);
         if(status < 0) {
diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c
index c776c372ae4..a8c20396ffb 100644
--- a/drivers/parisc/lasi.c
+++ b/drivers/parisc/lasi.c
@@ -175,7 +175,7 @@ lasi_init_chip(struct parisc_device *dev)
                 return -ENOMEM;
 
         lasi->name = "Lasi";
-        lasi->hpa = dev->hpa;
+        lasi->hpa = dev->hpa.start;
 
         /* Check the 4-bit (yes, only 4) version register */
         lasi->version = gsc_readl(lasi->hpa + LASI_VER) & 0xf;
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 7fdd80b7eb4..5e495dcbc58 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -1288,7 +1288,7 @@ lba_legacy_resources(struct parisc_device *pa_dev, struct lba_device *lba_dev)
                 ** Adjust "window" for this rope.
                 */
                 rsize /= ROPES_PER_IOC;
-                r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa);
+                r->start += (rsize + 1) * LBA_NUM(pa_dev->hpa.start);
                 r->end = r->start + rsize;
         } else {
                 r->end = r->start = 0;  /* Not enabled. */
@@ -1458,7 +1458,7 @@ lba_driver_probe(struct parisc_device *dev)
         u32 func_class;
         void *tmp_obj;
         char *version;
-        void __iomem *addr = ioremap(dev->hpa, 4096);
+        void __iomem *addr = ioremap(dev->hpa.start, 4096);
 
         /* Read HW Rev First */
         func_class = READ_REG32(addr + LBA_FCLASS);
@@ -1476,7 +1476,7 @@ lba_driver_probe(struct parisc_device *dev)
                 }
 
                 printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
-                        MODULE_NAME, version, func_class & 0xf, dev->hpa);
+                        MODULE_NAME, version, func_class & 0xf, dev->hpa.start);
 
                 if (func_class < 2) {
                         printk(KERN_WARNING "Can't support LBA older than "
@@ -1503,17 +1503,17 @@ lba_driver_probe(struct parisc_device *dev)
                  * but for the mask for func_class.
                  */ 
                 printk(KERN_INFO "%s version %s (0x%x) found at 0x%lx\n",
-                        MODULE_NAME, version, func_class & 0xff, dev->hpa);
+                       MODULE_NAME, version, func_class & 0xff, dev->hpa.start);
                 cfg_ops = &mercury_cfg_ops;
         } else {
-                printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa);
+                printk(KERN_ERR "Unknown LBA found at 0x%lx\n", dev->hpa.start);
                 return -ENODEV;
         }
 
         /*
         ** Tell I/O SAPIC driver we have a IRQ handler/region.
         */
-        tmp_obj = iosapic_register(dev->hpa + LBA_IOSAPIC_BASE);
+        tmp_obj = iosapic_register(dev->hpa.start + LBA_IOSAPIC_BASE);
 
         /* NOTE: PCI devices (e.g. 103c:1005 graphics card) which don't
         **      have an IRT entry will get NULL back from iosapic code.
@@ -1635,7 +1635,7 @@ void __init lba_init(void)
 */
 void lba_set_iregs(struct parisc_device *lba, u32 ibase, u32 imask)
 {
-        void __iomem * base_addr = ioremap(lba->hpa, 4096);
+        void __iomem * base_addr = ioremap(lba->hpa.start, 4096);
 
         imask <<= 2;    /* adjust for hints - 2 more bits */
 
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index a8405f05fb5..6256ad365d0 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -1600,7 +1600,7 @@ sba_ioc_init(struct parisc_device *sba, struct ioc *ioc, int ioc_num)
 
 static void __iomem *ioc_remap(struct sba_device *sba_dev, int offset)
 {
-        return ioremap(sba_dev->dev->hpa + offset, SBA_FUNC_SIZE);
+        return ioremap(sba_dev->dev->hpa.start + offset, SBA_FUNC_SIZE);
 }
 
 static void sba_hw_init(struct sba_device *sba_dev)
@@ -1978,7 +1978,7 @@ sba_driver_callback(struct parisc_device *dev)
         u32 func_class;
         int i;
         char *version;
-        void __iomem *sba_addr = ioremap(dev->hpa, SBA_FUNC_SIZE);
+        void __iomem *sba_addr = ioremap(dev->hpa.start, SBA_FUNC_SIZE);
 
         sba_dump_ranges(sba_addr);
 
@@ -2020,7 +2020,7 @@ sba_driver_callback(struct parisc_device *dev)
         }
 
         printk(KERN_INFO "%s found %s at 0x%lx\n",
-                MODULE_NAME, version, dev->hpa);
+                MODULE_NAME, version, dev->hpa.start);
 
         sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL);
         if (!sba_dev) {
diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c
index e547d7d024d..17dce2adf7f 100644
--- a/drivers/parisc/wax.c
+++ b/drivers/parisc/wax.c
@@ -81,7 +81,7 @@ wax_init_chip(struct parisc_device *dev)
                 return -ENOMEM;
 
         wax->name = "wax";
-        wax->hpa = dev->hpa;
+        wax->hpa = dev->hpa.start;
 
         wax->version = 0;   /* gsc_readb(wax->hpa+WAX_VER); */
         printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa);
diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index 02d72acd1c8..fde29a75f88 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -359,11 +359,12 @@ static int __devinit parport_init_chip(struct parisc_device *dev)
         unsigned long port;
 
         if (!dev->irq) {
-                printk("IRQ not found for parallel device at 0x%lx\n", dev->hpa);
+                printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n",
+                        dev->hpa.start);
                 return -ENODEV;
         }
 
-        port = dev->hpa + PARPORT_GSC_OFFSET;
+        port = dev->hpa.start + PARPORT_GSC_OFFSET;
         
         /* some older machines with ASP-chip don't support
          * the enhanced parport modes.
diff --git a/drivers/scsi/lasi700.c b/drivers/scsi/lasi700.c
index 123f4933d8f..8028418b3ad 100644
--- a/drivers/scsi/lasi700.c
+++ b/drivers/scsi/lasi700.c
@@ -98,7 +98,7 @@ MODULE_DEVICE_TABLE(parisc, lasi700_ids);
 static int __init
 lasi700_probe(struct parisc_device *dev)
 {
-        unsigned long base = dev->hpa + LASI_SCSI_CORE_OFFSET;
+        unsigned long base = dev->hpa.start + LASI_SCSI_CORE_OFFSET;
         struct NCR_700_Host_Parameters *hostdata;
         struct Scsi_Host *host;
 
diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
index 5a51051e31f..b131432c677 100644
--- a/drivers/scsi/zalon.c
+++ b/drivers/scsi/zalon.c
@@ -88,7 +88,7 @@ zalon_probe(struct parisc_device *dev)
         struct gsc_irq gsc_irq;
         u32 zalon_vers;
         int error = -ENODEV;
-        void __iomem *zalon = ioremap(dev->hpa, 4096);
+        void __iomem *zalon = ioremap(dev->hpa.start, 4096);
         void __iomem *io_port = zalon + GSC_SCSI_ZALON_OFFSET;
         static int unit = 0;
         struct Scsi_Host *host;
@@ -127,7 +127,7 @@ zalon_probe(struct parisc_device *dev)
         device.chip             = zalon720_chip;
         device.host_id          = 7;
         device.dev              = &dev->dev;
-        device.slot.base        = dev->hpa + GSC_SCSI_ZALON_OFFSET;
+        device.slot.base        = dev->hpa.start + GSC_SCSI_ZALON_OFFSET;
         device.slot.base_v      = io_port;
         device.slot.irq         = dev->irq;
         device.differential     = 2;
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 431aa5761a7..abc5a0cfe24 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -42,12 +42,13 @@ serial_init_chip(struct parisc_device *dev)
                  */
                 if (parisc_parent(dev)->id.hw_type != HPHW_IOA) {
                         printk(KERN_INFO "Serial: device 0x%lx not configured.\n"
-                                "Enable support for Wax, Lasi, Asp or Dino.\n", dev->hpa);
+                                "Enable support for Wax, Lasi, Asp or Dino.\n",
+                                dev->hpa.start);
                 }
                 return -ENODEV;
         }
 
-        address = dev->hpa;
+        address = dev->hpa.start;
         if (dev->id.sversion != 0x8d) {
                 address += 0x800;
         }
diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index a12005b08bc..009ce83c8ef 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -444,7 +444,7 @@ static int __init mux_probe(struct parisc_device *dev)
         unsigned long bytecnt;
         struct uart_port *port;
 
-        status = pdc_iodc_read(&bytecnt, dev->hpa, 0, iodc_data, 32);
+        status = pdc_iodc_read(&bytecnt, dev->hpa.start, 0, iodc_data, 32);
         if(status != PDC_OK) {
                 printk(KERN_ERR "Serial mux: Unable to read IODC.\n");
                 return 1;