1 files changed, 29 insertions, 21 deletions

diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index c4195ea869e..594887205b0 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -193,7 +193,8 @@ static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int f
                 cpu_relax();
         }
         if (!loop_count)
-                printk(KERN_EMERG "qlogicpti: mbox_command loop timeout #1\n");
+                printk(KERN_EMERG "qlogicpti%d: mbox_command loop timeout #1\n",
+                       qpti->qpti_id);
 
         /* Write mailbox command registers. */
         switch (mbox_param[param[0]] >> 4) {
@@ -224,8 +225,8 @@ static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int f
                (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_CRIRQ))
                 udelay(20);
         if (!loop_count)
-                printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #2\n",
-                       param[0]);
+                printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #2\n",
+                       qpti->qpti_id, param[0]);
 
         /* Wait for SBUS semaphore to get set. */
         loop_count = DEFAULT_LOOP_COUNT;
@@ -238,16 +239,16 @@ static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int f
                         break;
         }
         if (!loop_count)
-                printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #3\n",
-                       param[0]);
+                printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #3\n",
+                       qpti->qpti_id, param[0]);
 
         /* Wait for MBOX busy condition to go away. */
         loop_count = DEFAULT_LOOP_COUNT;
         while (--loop_count && (sbus_readw(qpti->qregs + MBOX0) == 0x04))
                 udelay(20);
         if (!loop_count)
-                printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #4\n",
-                       param[0]);
+                printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #4\n",
+                       qpti->qpti_id, param[0]);
 
         /* Read back output parameters. */
         switch (mbox_param[param[0]] & 0xf) {
@@ -342,7 +343,8 @@ static int qlogicpti_reset_hardware(struct Scsi_Host *host)
         while (--loop_count && ((sbus_readw(qpti->qregs + MBOX0) & 0xff) == 0x04))
                 udelay(20);
         if (!loop_count)
-                printk(KERN_EMERG "qlogicpti: reset_hardware loop timeout\n");
+                printk(KERN_EMERG "qlogicpti%d: reset_hardware loop timeout\n",
+                       qpti->qpti_id);
 
         sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
         set_sbus_cfg1(qpti);
@@ -721,12 +723,12 @@ static int __init qpti_register_irq(struct qlogicpti *qpti)
                         IRQF_SHARED, "Qlogic/PTI", qpti))
                 goto fail;
 
-        printk("qpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
+        printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
 
         return 0;
 
 fail:
-        printk("qpti%d: Cannot acquire irq line\n", qpti->qpti_id);
+        printk("qlogicpti%d: Cannot acquire irq line\n", qpti->qpti_id);
         return -1;
 }
 
@@ -1210,7 +1212,7 @@ static int qlogicpti_return_status(struct Status_Entry *sts, int id)
                 host_status = DID_OK;
                 break;
               default:
-                printk(KERN_EMERG "qpti%d: unknown completion status 0x%04x\n",
+                printk(KERN_EMERG "qlogicpti%d: unknown completion status 0x%04x\n",
                        id, sts->completion_status);
                 host_status = DID_ERROR;
                 break;
@@ -1329,8 +1331,8 @@ static int qlogicpti_abort(struct scsi_cmnd *Cmnd)
         u32 cmd_cookie;
         int i;
 
-        printk(KERN_WARNING "qlogicpti : Aborting cmd for tgt[%d] lun[%d]\n",
-               (int)Cmnd->device->id, (int)Cmnd->device->lun);
+        printk(KERN_WARNING "qlogicpti%d: Aborting cmd for tgt[%d] lun[%d]\n",
+               qpti->qpti_id, (int)Cmnd->device->id, (int)Cmnd->device->lun);
 
         qlogicpti_disable_irqs(qpti);
 
@@ -1348,7 +1350,8 @@ static int qlogicpti_abort(struct scsi_cmnd *Cmnd)
         param[3] = cmd_cookie & 0xffff;
         if (qlogicpti_mbox_command(qpti, param, 0) ||
             (param[0] != MBOX_COMMAND_COMPLETE)) {
-                printk(KERN_EMERG "qlogicpti : scsi abort failure: %x\n", param[0]);
+                printk(KERN_EMERG "qlogicpti%d: scsi abort failure: %x\n",
+                       qpti->qpti_id, param[0]);
                 return_status = FAILED;
         }
 
@@ -1364,7 +1367,8 @@ static int qlogicpti_reset(struct scsi_cmnd *Cmnd)
         struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
         int return_status = SUCCESS;
 
-        printk(KERN_WARNING "qlogicpti : Resetting SCSI bus!\n");
+        printk(KERN_WARNING "qlogicpti%d: Resetting SCSI bus!\n",
+               qpti->qpti_id);
 
         qlogicpti_disable_irqs(qpti);
 
@@ -1372,7 +1376,8 @@ static int qlogicpti_reset(struct scsi_cmnd *Cmnd)
         param[1] = qpti->host_param.bus_reset_delay;
         if (qlogicpti_mbox_command(qpti, param, 0) ||
            (param[0] != MBOX_COMMAND_COMPLETE)) {
-                printk(KERN_EMERG "qlogicisp : scsi bus reset failure: %x\n", param[0]);
+                printk(KERN_EMERG "qlogicisp%d: scsi bus reset failure: %x\n",
+                       qpti->qpti_id, param[0]);
                 return_status = FAILED;
         }
 
@@ -1454,22 +1459,25 @@ static int __devinit qpti_sbus_probe(struct of_device *dev, const struct of_devi
         if (qlogicpti_reset_hardware(host))
                 goto fail_unmap_queues;
 
-        if (scsi_add_host(host, &dev->dev))
-                goto fail_unmap_queues;
-
         printk("(Firmware v%d.%d.%d)", qpti->fware_majrev,
                qpti->fware_minrev, qpti->fware_micrev);
 
         fcode = of_get_property(dp, "isp-fcode", NULL);
         if (fcode && fcode[0])
-                printk("(Firmware %s)", fcode);
+                printk("(FCode %s)", fcode);
         if (of_find_property(dp, "differential", NULL) != NULL)
                 qpti->differential = 1;
                         
-        printk (" [%s Wide, using %s interface]\n",
+        printk("\nqlogicpti%d: [%s Wide, using %s interface]\n",
+                qpti->qpti_id,
                 (qpti->ultra ? "Ultra" : "Fast"),
                 (qpti->differential ? "differential" : "single ended"));
 
+        if (scsi_add_host(host, &dev->dev)) {
+                printk("qlogicpti%d: Failed scsi_add_host\n", qpti->qpti_id);
+                goto fail_unmap_queues;
+        }
+
         dev_set_drvdata(&sdev->ofdev.dev, qpti);
 
         qpti_chain_add(qpti);