aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ide/at91_ide.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/at91_ide.c')
-rw-r--r--drivers/ide/at91_ide.c467
1 files changed, 467 insertions, 0 deletions
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
new file mode 100644
index 00000000000..1bb50f46388
--- /dev/null
+++ b/drivers/ide/at91_ide.c
@@ -0,0 +1,467 @@
1/*
2 * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
3 * with Compact Flash True IDE logic
4 *
5 * Copyright (c) 2008, 2009 Kelvatek Ltd.
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20 *
21 */
22
23#include <linux/version.h>
24#include <linux/kernel.h>
25#include <linux/module.h>
26#include <linux/clk.h>
27#include <linux/err.h>
28#include <linux/ide.h>
29#include <linux/platform_device.h>
30
31#include <mach/board.h>
32#include <mach/gpio.h>
33#include <mach/at91sam9263.h>
34#include <mach/at91sam9_smc.h>
35#include <mach/at91sam9263_matrix.h>
36
37#define DRV_NAME "at91_ide"
38
39#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
40#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
41
42/*
43 * Access to IDE device is possible through EBI Static Memory Controller
44 * with Compact Flash logic. For details see EBI and SMC datasheet sections
45 * of any microcontroller from AT91SAM9 family.
46 *
47 * Within SMC chip select address space, lines A[23:21] distinguish Compact
48 * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
49 * 0x00c0000 - True IDE
50 * 0x00e0000 - Alternate True IDE (Alt Status Register)
51 *
52 * On True IDE mode Task File and Data Register are mapped at the same address.
53 * To distinguish access between these two different bus data width is used:
54 * 8Bit for Task File, 16Bit for Data I/O.
55 *
56 * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
57 * only inside IDE callback routines which are serialized by IDE layer,
58 * so no additional locking needed.
59 */
60
61#define TASK_FILE 0x00c00000
62#define ALT_MODE 0x00e00000
63#define REGS_SIZE 8
64
65#define enter_16bit(cs, mode) do { \
66 mode = at91_sys_read(AT91_SMC_MODE(cs)); \
67 at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16); \
68} while (0)
69
70#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
71
72static void set_smc_timings(const u8 chipselect, const u16 cycle,
73 const u16 setup, const u16 pulse,
74 const u16 data_float, int use_iordy)
75{
76 unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
77 AT91_SMC_BAT_SELECT;
78
79 /* disable or enable waiting for IORDY signal */
80 if (use_iordy)
81 mode |= AT91_SMC_EXNWMODE_READY;
82
83 /* add data float cycles if needed */
84 if (data_float)
85 mode |= AT91_SMC_TDF_(data_float);
86
87 at91_sys_write(AT91_SMC_MODE(chipselect), mode);
88
89 /* setup timings in SMC */
90 at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
91 AT91_SMC_NCS_WRSETUP_(0) |
92 AT91_SMC_NRDSETUP_(setup) |
93 AT91_SMC_NCS_RDSETUP_(0));
94 at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
95 AT91_SMC_NCS_WRPULSE_(cycle) |
96 AT91_SMC_NRDPULSE_(pulse) |
97 AT91_SMC_NCS_RDPULSE_(cycle));
98 at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
99 AT91_SMC_NRDCYCLE_(cycle));
100}
101
102static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
103{
104 u64 tmp = ns;
105
106 tmp *= mck_hz;
107 tmp += 1000*1000*1000 - 1; /* round up */
108 do_div(tmp, 1000*1000*1000);
109 return (unsigned int) tmp;
110}
111
112static void apply_timings(const u8 chipselect, const u8 pio,
113 const struct ide_timing *timing, int use_iordy)
114{
115 unsigned int t0, t1, t2, t6z;
116 unsigned int cycle, setup, pulse, data_float;
117 unsigned int mck_hz;
118 struct clk *mck;
119
120 /* see table 22 of Compact Flash standard 4.1 for the meaning,
121 * we do not stretch active (t2) time, so setup (t1) + hold time (th)
122 * assure at least minimal recovery (t2i) time */
123 t0 = timing->cyc8b;
124 t1 = timing->setup;
125 t2 = timing->act8b;
126 t6z = (pio < 5) ? 30 : 20;
127
128 pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
129
130 mck = clk_get(NULL, "mck");
131 BUG_ON(IS_ERR(mck));
132 mck_hz = clk_get_rate(mck);
133 pdbg("mck_hz=%u\n", mck_hz);
134
135 cycle = calc_mck_cycles(t0, mck_hz);
136 setup = calc_mck_cycles(t1, mck_hz);
137 pulse = calc_mck_cycles(t2, mck_hz);
138 data_float = calc_mck_cycles(t6z, mck_hz);
139
140 pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
141 cycle, setup, pulse, data_float);
142
143 set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
144}
145
146static void at91_ide_input_data(ide_drive_t *drive, struct request *rq,
147 void *buf, unsigned int len)
148{
149 ide_hwif_t *hwif = drive->hwif;
150 struct ide_io_ports *io_ports = &hwif->io_ports;
151 u8 chipselect = hwif->select_data;
152 unsigned long mode;
153
154 pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
155
156 len++;
157
158 enter_16bit(chipselect, mode);
159 __ide_mm_insw((void __iomem *) io_ports->data_addr, buf, len / 2);
160 leave_16bit(chipselect, mode);
161}
162
163static void at91_ide_output_data(ide_drive_t *drive, struct request *rq,
164 void *buf, unsigned int len)
165{
166 ide_hwif_t *hwif = drive->hwif;
167 struct ide_io_ports *io_ports = &hwif->io_ports;
168 u8 chipselect = hwif->select_data;
169 unsigned long mode;
170
171 pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
172
173 enter_16bit(chipselect, mode);
174 __ide_mm_outsw((void __iomem *) io_ports->data_addr, buf, len / 2);
175 leave_16bit(chipselect, mode);
176}
177
178static u8 ide_mm_inb(unsigned long port)
179{
180 return readb((void __iomem *) port);
181}
182
183static void ide_mm_outb(u8 value, unsigned long port)
184{
185 writeb(value, (void __iomem *) port);
186}
187
188static void at91_ide_tf_load(ide_drive_t *drive, ide_task_t *task)
189{
190 ide_hwif_t *hwif = drive->hwif;
191 struct ide_io_ports *io_ports = &hwif->io_ports;
192 struct ide_taskfile *tf = &task->tf;
193 u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
194
195 if (task->tf_flags & IDE_TFLAG_FLAGGED)
196 HIHI = 0xFF;
197
198 if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
199 u16 data = (tf->hob_data << 8) | tf->data;
200
201 at91_ide_output_data(drive, NULL, &data, 2);
202 }
203
204 if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
205 ide_mm_outb(tf->hob_feature, io_ports->feature_addr);
206 if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
207 ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr);
208 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
209 ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr);
210 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
211 ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr);
212 if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
213 ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr);
214
215 if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
216 ide_mm_outb(tf->feature, io_ports->feature_addr);
217 if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
218 ide_mm_outb(tf->nsect, io_ports->nsect_addr);
219 if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
220 ide_mm_outb(tf->lbal, io_ports->lbal_addr);
221 if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
222 ide_mm_outb(tf->lbam, io_ports->lbam_addr);
223 if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
224 ide_mm_outb(tf->lbah, io_ports->lbah_addr);
225
226 if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
227 ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr);
228}
229
230static void at91_ide_tf_read(ide_drive_t *drive, ide_task_t *task)
231{
232 ide_hwif_t *hwif = drive->hwif;
233 struct ide_io_ports *io_ports = &hwif->io_ports;
234 struct ide_taskfile *tf = &task->tf;
235
236 if (task->tf_flags & IDE_TFLAG_IN_DATA) {
237 u16 data;
238
239 at91_ide_input_data(drive, NULL, &data, 2);
240 tf->data = data & 0xff;
241 tf->hob_data = (data >> 8) & 0xff;
242 }
243
244 /* be sure we're looking at the low order bits */
245 ide_mm_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
246
247 if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
248 tf->feature = ide_mm_inb(io_ports->feature_addr);
249 if (task->tf_flags & IDE_TFLAG_IN_NSECT)
250 tf->nsect = ide_mm_inb(io_ports->nsect_addr);
251 if (task->tf_flags & IDE_TFLAG_IN_LBAL)
252 tf->lbal = ide_mm_inb(io_ports->lbal_addr);
253 if (task->tf_flags & IDE_TFLAG_IN_LBAM)
254 tf->lbam = ide_mm_inb(io_ports->lbam_addr);
255 if (task->tf_flags & IDE_TFLAG_IN_LBAH)
256 tf->lbah = ide_mm_inb(io_ports->lbah_addr);
257 if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
258 tf->device = ide_mm_inb(io_ports->device_addr);
259
260 if (task->tf_flags & IDE_TFLAG_LBA48) {
261 ide_mm_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
262
263 if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
264 tf->hob_feature = ide_mm_inb(io_ports->feature_addr);
265 if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
266 tf->hob_nsect = ide_mm_inb(io_ports->nsect_addr);
267 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
268 tf->hob_lbal = ide_mm_inb(io_ports->lbal_addr);
269 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
270 tf->hob_lbam = ide_mm_inb(io_ports->lbam_addr);
271 if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
272 tf->hob_lbah = ide_mm_inb(io_ports->lbah_addr);
273 }
274}
275
276static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
277{
278 struct ide_timing *timing;
279 u8 chipselect = drive->hwif->select_data;
280 int use_iordy = 0;
281
282 pdbg("chipselect %u pio %u\n", chipselect, pio);
283
284 timing = ide_timing_find_mode(XFER_PIO_0 + pio);
285 BUG_ON(!timing);
286
287 if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
288 !(ata_id_is_cfa(drive->id) && pio > 4))
289 use_iordy = 1;
290
291 apply_timings(chipselect, pio, timing, use_iordy);
292}
293
294static const struct ide_tp_ops at91_ide_tp_ops = {
295 .exec_command = ide_exec_command,
296 .read_status = ide_read_status,
297 .read_altstatus = ide_read_altstatus,
298 .set_irq = ide_set_irq,
299
300 .tf_load = at91_ide_tf_load,
301 .tf_read = at91_ide_tf_read,
302
303 .input_data = at91_ide_input_data,
304 .output_data = at91_ide_output_data,
305};
306
307static const struct ide_port_ops at91_ide_port_ops = {
308 .set_pio_mode = at91_ide_set_pio_mode,
309};
310
311static const struct ide_port_info at91_ide_port_info __initdata = {
312 .port_ops = &at91_ide_port_ops,
313 .tp_ops = &at91_ide_tp_ops,
314 .host_flags = IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
315 IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
316 .pio_mask = ATA_PIO5,
317};
318
319/*
320 * If interrupt is delivered through GPIO, IRQ are triggered on falling
321 * and rising edge of signal. Whereas IDE device request interrupt on high
322 * level (rising edge in our case). This mean we have fake interrupts, so
323 * we need to check interrupt pin and exit instantly from ISR when line
324 * is on low level.
325 */
326
327irqreturn_t at91_irq_handler(int irq, void *dev_id)
328{
329 int ntries = 8;
330 int pin_val1, pin_val2;
331
332 /* additional deglitch, line can be noisy in badly designed PCB */
333 do {
334 pin_val1 = at91_get_gpio_value(irq);
335 pin_val2 = at91_get_gpio_value(irq);
336 } while (pin_val1 != pin_val2 && --ntries > 0);
337
338 if (pin_val1 == 0 || ntries <= 0)
339 return IRQ_HANDLED;
340
341 return ide_intr(irq, dev_id);
342}
343
344static int __init at91_ide_probe(struct platform_device *pdev)
345{
346 int ret;
347 hw_regs_t hw;
348 hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
349 struct ide_host *host;
350 struct resource *res;
351 unsigned long tf_base = 0, ctl_base = 0;
352 struct at91_cf_data *board = pdev->dev.platform_data;
353
354 if (!board)
355 return -ENODEV;
356
357 if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
358 perr("no device detected\n");
359 return -ENODEV;
360 }
361
362 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
363 if (!res) {
364 perr("can't get memory resource\n");
365 return -ENODEV;
366 }
367
368 if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
369 REGS_SIZE, "ide") ||
370 !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
371 REGS_SIZE, "alt")) {
372 perr("memory resources in use\n");
373 return -EBUSY;
374 }
375
376 pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
377 board->irq_pin, (unsigned long) res->start);
378
379 tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
380 REGS_SIZE);
381 ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
382 REGS_SIZE);
383 if (!tf_base || !ctl_base) {
384 perr("can't map memory regions\n");
385 return -EBUSY;
386 }
387
388 memset(&hw, 0, sizeof(hw));
389
390 if (board->flags & AT91_IDE_SWAP_A0_A2) {
391 /* workaround for stupid hardware bug */
392 hw.io_ports.data_addr = tf_base + 0;
393 hw.io_ports.error_addr = tf_base + 4;
394 hw.io_ports.nsect_addr = tf_base + 2;
395 hw.io_ports.lbal_addr = tf_base + 6;
396 hw.io_ports.lbam_addr = tf_base + 1;
397 hw.io_ports.lbah_addr = tf_base + 5;
398 hw.io_ports.device_addr = tf_base + 3;
399 hw.io_ports.command_addr = tf_base + 7;
400 hw.io_ports.ctl_addr = ctl_base + 3;
401 } else
402 ide_std_init_ports(&hw, tf_base, ctl_base + 6);
403
404 hw.irq = board->irq_pin;
405 hw.chipset = ide_generic;
406 hw.dev = &pdev->dev;
407
408 host = ide_host_alloc(&at91_ide_port_info, hws);
409 if (!host) {
410 perr("failed to allocate ide host\n");
411 return -ENOMEM;
412 }
413
414 /* setup Static Memory Controller - PIO 0 as default */
415 apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
416
417 /* with GPIO interrupt we have to do quirks in handler */
418 if (board->irq_pin >= PIN_BASE)
419 host->irq_handler = at91_irq_handler;
420
421 host->ports[0]->select_data = board->chipselect;
422
423 ret = ide_host_register(host, &at91_ide_port_info, hws);
424 if (ret) {
425 perr("failed to register ide host\n");
426 goto err_free_host;
427 }
428 platform_set_drvdata(pdev, host);
429 return 0;
430
431err_free_host:
432 ide_host_free(host);
433 return ret;
434}
435
436static int __exit at91_ide_remove(struct platform_device *pdev)
437{
438 struct ide_host *host = platform_get_drvdata(pdev);
439
440 ide_host_remove(host);
441 return 0;
442}
443
444static struct platform_driver at91_ide_driver = {
445 .driver = {
446 .name = DRV_NAME,
447 .owner = THIS_MODULE,
448 },
449 .remove = __exit_p(at91_ide_remove),
450};
451
452static int __init at91_ide_init(void)
453{
454 return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
455}
456
457static void __exit at91_ide_exit(void)
458{
459 platform_driver_unregister(&at91_ide_driver);
460}
461
462module_init(at91_ide_init);
463module_exit(at91_ide_exit);
464
465MODULE_LICENSE("GPL");
466MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
467
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-30 03:00:30 -0500