1 files changed, 284 insertions, 0 deletions

diff --git a/arch/x86/include/asm/io_32.h b/arch/x86/include/asm/io_32.h
new file mode 100644
index 00000000000..d8e242e1b39
--- /dev/null
+++ b/arch/x86/include/asm/io_32.h
@@ -0,0 +1,284 @@
+#ifndef _ASM_X86_IO_32_H
+#define _ASM_X86_IO_32_H
+
+#include <linux/string.h>
+#include <linux/compiler.h>
+
+/*
+ * This file contains the definitions for the x86 IO instructions
+ * inb/inw/inl/outb/outw/outl and the "string versions" of the same
+ * (insb/insw/insl/outsb/outsw/outsl). You can also use "pausing"
+ * versions of the single-IO instructions (inb_p/inw_p/..).
+ *
+ * This file is not meant to be obfuscating: it's just complicated
+ * to (a) handle it all in a way that makes gcc able to optimize it
+ * as well as possible and (b) trying to avoid writing the same thing
+ * over and over again with slight variations and possibly making a
+ * mistake somewhere.
+ */
+
+/*
+ * Thanks to James van Artsdalen for a better timing-fix than
+ * the two short jumps: using outb's to a nonexistent port seems
+ * to guarantee better timings even on fast machines.
+ *
+ * On the other hand, I'd like to be sure of a non-existent port:
+ * I feel a bit unsafe about using 0x80 (should be safe, though)
+ *
+ *              Linus
+ */
+
+ /*
+  *  Bit simplified and optimized by Jan Hubicka
+  *  Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999.
+  *
+  *  isa_memset_io, isa_memcpy_fromio, isa_memcpy_toio added,
+  *  isa_read[wl] and isa_write[wl] fixed
+  *  - Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+  */
+
+#define IO_SPACE_LIMIT 0xffff
+
+#define XQUAD_PORTIO_BASE 0xfe400000
+#define XQUAD_PORTIO_QUAD 0x40000  /* 256k per quad. */
+
+#ifdef __KERNEL__
+
+#include <asm-generic/iomap.h>
+
+#include <linux/vmalloc.h>
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+/**
+ *      virt_to_phys    -       map virtual addresses to physical
+ *      @address: address to remap
+ *
+ *      The returned physical address is the physical (CPU) mapping for
+ *      the memory address given. It is only valid to use this function on
+ *      addresses directly mapped or allocated via kmalloc.
+ *
+ *      This function does not give bus mappings for DMA transfers. In
+ *      almost all conceivable cases a device driver should not be using
+ *      this function
+ */
+
+static inline unsigned long virt_to_phys(volatile void *address)
+{
+        return __pa(address);
+}
+
+/**
+ *      phys_to_virt    -       map physical address to virtual
+ *      @address: address to remap
+ *
+ *      The returned virtual address is a current CPU mapping for
+ *      the memory address given. It is only valid to use this function on
+ *      addresses that have a kernel mapping
+ *
+ *      This function does not handle bus mappings for DMA transfers. In
+ *      almost all conceivable cases a device driver should not be using
+ *      this function
+ */
+
+static inline void *phys_to_virt(unsigned long address)
+{
+        return __va(address);
+}
+
+/*
+ * Change "struct page" to physical address.
+ */
+#define page_to_phys(page)    ((dma_addr_t)page_to_pfn(page) << PAGE_SHIFT)
+
+/**
+ * ioremap     -   map bus memory into CPU space
+ * @offset:    bus address of the memory
+ * @size:      size of the resource to map
+ *
+ * ioremap performs a platform specific sequence of operations to
+ * make bus memory CPU accessible via the readb/readw/readl/writeb/
+ * writew/writel functions and the other mmio helpers. The returned
+ * address is not guaranteed to be usable directly as a virtual
+ * address.
+ *
+ * If the area you are trying to map is a PCI BAR you should have a
+ * look at pci_iomap().
+ */
+extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
+extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
+                                unsigned long prot_val);
+
+/*
+ * The default ioremap() behavior is non-cached:
+ */
+static inline void __iomem *ioremap(resource_size_t offset, unsigned long size)
+{
+        return ioremap_nocache(offset, size);
+}
+
+extern void iounmap(volatile void __iomem *addr);
+
+/*
+ * ISA I/O bus memory addresses are 1:1 with the physical address.
+ */
+#define isa_virt_to_bus virt_to_phys
+#define isa_page_to_bus page_to_phys
+#define isa_bus_to_virt phys_to_virt
+
+/*
+ * However PCI ones are not necessarily 1:1 and therefore these interfaces
+ * are forbidden in portable PCI drivers.
+ *
+ * Allow them on x86 for legacy drivers, though.
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+static inline void
+memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+        memset((void __force *)addr, val, count);
+}
+
+static inline void
+memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+        __memcpy(dst, (const void __force *)src, count);
+}
+
+static inline void
+memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+        __memcpy((void __force *)dst, src, count);
+}
+
+/*
+ * ISA space is 'always mapped' on a typical x86 system, no need to
+ * explicitly ioremap() it. The fact that the ISA IO space is mapped
+ * to PAGE_OFFSET is pure coincidence - it does not mean ISA values
+ * are physical addresses. The following constant pointer can be
+ * used as the IO-area pointer (it can be iounmapped as well, so the
+ * analogy with PCI is quite large):
+ */
+#define __ISA_IO_base ((char __iomem *)(PAGE_OFFSET))
+
+/*
+ *      Cache management
+ *
+ *      This needed for two cases
+ *      1. Out of order aware processors
+ *      2. Accidentally out of order processors (PPro errata #51)
+ */
+
+#if defined(CONFIG_X86_OOSTORE) || defined(CONFIG_X86_PPRO_FENCE)
+
+static inline void flush_write_buffers(void)
+{
+        asm volatile("lock; addl $0,0(%%esp)": : :"memory");
+}
+
+#else
+
+#define flush_write_buffers() do { } while (0)
+
+#endif
+
+#endif /* __KERNEL__ */
+
+extern void native_io_delay(void);
+
+extern int io_delay_type;
+extern void io_delay_init(void);
+
+#if defined(CONFIG_PARAVIRT)
+#include <asm/paravirt.h>
+#else
+
+static inline void slow_down_io(void)
+{
+        native_io_delay();
+#ifdef REALLY_SLOW_IO
+        native_io_delay();
+        native_io_delay();
+        native_io_delay();
+#endif
+}
+
+#endif
+
+#define __BUILDIO(bwl, bw, type)                                \
+static inline void out##bwl(unsigned type value, int port)      \
+{                                                               \
+        out##bwl##_local(value, port);                          \
+}                                                               \
+                                                                \
+static inline unsigned type in##bwl(int port)                   \
+{                                                               \
+        return in##bwl##_local(port);                           \
+}
+
+#define BUILDIO(bwl, bw, type)                                          \
+static inline void out##bwl##_local(unsigned type value, int port)      \
+{                                                                       \
+        asm volatile("out" #bwl " %" #bw "0, %w1"               \
+                     : : "a"(value), "Nd"(port));                       \
+}                                                                       \
+                                                                        \
+static inline unsigned type in##bwl##_local(int port)                   \
+{                                                                       \
+        unsigned type value;                                            \
+        asm volatile("in" #bwl " %w1, %" #bw "0"                \
+                     : "=a"(value) : "Nd"(port));                       \
+        return value;                                                   \
+}                                                                       \
+                                                                        \
+static inline void out##bwl##_local_p(unsigned type value, int port)    \
+{                                                                       \
+        out##bwl##_local(value, port);                                  \
+        slow_down_io();                                                 \
+}                                                                       \
+                                                                        \
+static inline unsigned type in##bwl##_local_p(int port)                 \
+{                                                                       \
+        unsigned type value = in##bwl##_local(port);                    \
+        slow_down_io();                                                 \
+        return value;                                                   \
+}                                                                       \
+                                                                        \
+__BUILDIO(bwl, bw, type)                                                \
+                                                                        \
+static inline void out##bwl##_p(unsigned type value, int port)          \
+{                                                                       \
+        out##bwl(value, port);                                          \
+        slow_down_io();                                                 \
+}                                                                       \
+                                                                        \
+static inline unsigned type in##bwl##_p(int port)                       \
+{                                                                       \
+        unsigned type value = in##bwl(port);                            \
+        slow_down_io();                                                 \
+        return value;                                                   \
+}                                                                       \
+                                                                        \
+static inline void outs##bwl(int port, const void *addr, unsigned long count) \
+{                                                                       \
+        asm volatile("rep; outs" #bwl                                   \
+                     : "+S"(addr), "+c"(count) : "d"(port));            \
+}                                                                       \
+                                                                        \
+static inline void ins##bwl(int port, void *addr, unsigned long count)  \
+{                                                                       \
+        asm volatile("rep; ins" #bwl                                    \
+                     : "+D"(addr), "+c"(count) : "d"(port));            \
+}
+
+BUILDIO(b, b, char)
+BUILDIO(w, w, short)
+BUILDIO(l, , int)
+
+#endif /* _ASM_X86_IO_32_H */