9 files changed, 197 insertions, 2 deletions

diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h
index e32f9edfd4b..7712ff6336f 100644
--- a/arch/arm/plat-samsung/include/plat/audio.h
+++ b/arch/arm/plat-samsung/include/plat/audio.h
@@ -16,6 +16,15 @@
 #define S3C64XX_AC97_GPE  1
 extern void s3c64xx_ac97_setup_gpio(int);
 
+/*
+ * The machine init code calls s5p*_spdif_setup_gpio with
+ * one of these defines in order to select appropriate bank
+ * of GPIO for S/PDIF pins
+ */
+#define S5PC100_SPDIF_GPD  0
+#define S5PC100_SPDIF_GPG3 1
+extern void s5pc100_spdif_setup_gpio(int);
+
 /**
  * struct s3c_audio_pdata - common platform data for audio device drivers
  * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index c8b94279bad..2d82a6cb144 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -48,6 +48,11 @@ extern struct platform_device s3c_device_wdt;
 extern struct platform_device s3c_device_i2c0;
 extern struct platform_device s3c_device_i2c1;
 extern struct platform_device s3c_device_i2c2;
+extern struct platform_device s3c_device_i2c3;
+extern struct platform_device s3c_device_i2c4;
+extern struct platform_device s3c_device_i2c5;
+extern struct platform_device s3c_device_i2c6;
+extern struct platform_device s3c_device_i2c7;
 extern struct platform_device s3c_device_rtc;
 extern struct platform_device s3c_device_adc;
 extern struct platform_device s3c_device_sdi;
@@ -89,6 +94,7 @@ extern struct platform_device s5pv210_device_pcm2;
 extern struct platform_device s5pv210_device_iis0;
 extern struct platform_device s5pv210_device_iis1;
 extern struct platform_device s5pv210_device_iis2;
+extern struct platform_device s5pv210_device_spdif;
 
 extern struct platform_device s5p6442_device_pcm0;
 extern struct platform_device s5p6442_device_pcm1;
@@ -108,6 +114,7 @@ extern struct platform_device s5pc100_device_pcm1;
 extern struct platform_device s5pc100_device_iis0;
 extern struct platform_device s5pc100_device_iis1;
 extern struct platform_device s5pc100_device_iis2;
+extern struct platform_device s5pc100_device_spdif;
 
 extern struct platform_device samsung_device_keypad;
 
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
index 3e21c75feef..8fd65d8b586 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h
@@ -42,6 +42,12 @@ static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip,
         return (chip->config->set_pull)(chip, off, pull);
 }
 
+static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip,
+                                                  unsigned int off)
+{
+        return chip->config->get_pull(chip, off);
+}
+
 /**
  * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration.
  * @chip: The gpio chip that is being configured.
diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
index 1c6b92947c5..e4b5cf126fa 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h
@@ -108,6 +108,19 @@ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to);
  */
 extern unsigned s3c_gpio_getcfg(unsigned int pin);
 
+/**
+ * s3c_gpio_cfgpin_range() - Change the GPIO function for configuring pin range
+ * @start: The pin number to start at
+ * @nr: The number of pins to configure from @start.
+ * @cfg: The configuration for the pin's function
+ *
+ * Call s3c_gpio_cfgpin() for the @nr pins starting at @start.
+ *
+ * @sa s3c_gpio_cfgpin.
+ */
+extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr,
+                                 unsigned int cfg);
+
 /* Define values for the pull-{up,down} available for each gpio pin.
  *
  * These values control the state of the weak pull-{up,down} resistors
@@ -140,6 +153,31 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull);
 */
 extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin);
 
+/* configure `all` aspects of an gpio */
+
+/**
+ * s3c_gpio_cfgall_range() - configure range of gpio functtion and pull.
+ * @start: The gpio number to start at.
+ * @nr: The number of gpio to configure from @start.
+ * @cfg: The configuration to use
+ * @pull: The pull setting to use.
+ *
+ * Run s3c_gpio_cfgpin() and s3c_gpio_setpull() over the gpio range starting
+ * @gpio and running for @size.
+ *
+ * @sa s3c_gpio_cfgpin
+ * @sa s3c_gpio_setpull
+ * @sa s3c_gpio_cfgpin_range
+ */
+extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr,
+                                 unsigned int cfg, s3c_gpio_pull_t pull);
+
+static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size,
+                                           unsigned int cfg)
+{
+        return s3c_gpio_cfgall_range(pin, size, cfg, S3C_GPIO_PULL_NONE);
+}
+
 /* Define values for the drvstr available for each gpio pin.
  *
  * These values control the value of the output signal driver strength,
@@ -169,4 +207,22 @@ extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin);
 */
 extern int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr);
 
+/**
+ * s5p_register_gpio_interrupt() - register interrupt support for a gpio group
+ * @pin: The pin number from the group to be registered
+ *
+ * This function registers gpio interrupt support for the group that the
+ * specified pin belongs to.
+ *
+ * The total number of gpio pins is quite large ob s5p series. Registering
+ * irq support for all of them would be a resource waste. Because of that the
+ * interrupt support for standard gpio pins is registered dynamically.
+ *
+ * It will return the irq number of the interrupt that has been registered
+ * or -ENOMEM if no more gpio interrupts can be registered. It is allowed
+ * to call this function more than once for the same gpio group (the group
+ * will be registered only once).
+ */
+extern int s5p_register_gpio_interrupt(int pin);
+
 #endif /* __PLAT_GPIO_CFG_H */
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index e358c7da848..13a22b8861e 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -43,6 +43,8 @@ struct s3c_gpio_cfg;
  * struct s3c_gpio_chip - wrapper for specific implementation of gpio
  * @chip: The chip structure to be exported via gpiolib.
  * @base: The base pointer to the gpio configuration registers.
+ * @group: The group register number for gpio interrupt support.
+ * @irq_base: The base irq number.
  * @config: special function and pull-resistor control information.
  * @lock: Lock for exclusive access to this gpio bank.
  * @pm_save: Save information for suspend/resume support.
@@ -63,6 +65,8 @@ struct s3c_gpio_chip {
         struct s3c_gpio_cfg     *config;
         struct s3c_gpio_pm      *pm;
         void __iomem            *base;
+        int                     irq_base;
+        int                     group;
         spinlock_t               lock;
 #ifdef CONFIG_PM
         u32                     pm_save[4];
@@ -118,6 +122,17 @@ extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip,
 extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip);
 extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip);
 
+
+/**
+ * samsung_gpiolib_to_irq - convert gpio pin to irq number
+ * @chip: The gpio chip that the pin belongs to.
+ * @offset: The offset of the pin in the chip.
+ *
+ * This helper returns the irq number calculated from the chip->irq_base and
+ * the provided offset.
+ */
+extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset);
+
 /* exported for core SoC support to change */
 extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default;
 
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 133308bf595..1543da8f85c 100644
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -55,10 +55,20 @@ struct s3c2410_platform_i2c {
 extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
 extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c);
 
 /* defined by architecture to configure gpio */
 extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
 extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
 extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
 
 #endif /* __ASM_ARCH_IIC_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-base.h b/arch/arm/plat-samsung/include/plat/map-base.h
index 250be311c85..3ffac4d2e4f 100644
--- a/arch/arm/plat-samsung/include/plat/map-base.h
+++ b/arch/arm/plat-samsung/include/plat/map-base.h
@@ -14,7 +14,7 @@
 #ifndef __ASM_PLAT_MAP_H
 #define __ASM_PLAT_MAP_H __FILE__
 
-/* Fit all our registers in at 0xF4000000 upwards, trying to use as
+/* Fit all our registers in at 0xF6000000 upwards, trying to use as
  * little of the VA space as possible so vmalloc and friends have a
  * better chance of getting memory.
  *
@@ -22,7 +22,7 @@
  * an single MOVS instruction (ie, only 8 bits of set data)
  */
 
-#define S3C_ADDR_BASE   (0xF4000000)
+#define S3C_ADDR_BASE   0xF6000000
 
 #ifndef __ASSEMBLY__
 #define S3C_ADDR(x)     ((void __iomem __force *)S3C_ADDR_BASE + (x))
diff --git a/arch/arm/plat-samsung/include/plat/nand-core.h b/arch/arm/plat-samsung/include/plat/nand-core.h
new file mode 100644
index 00000000000..6de20789a95
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/nand-core.h
@@ -0,0 +1,28 @@
+/* arch/arm/plat-samsung/include/plat/nand-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com/
+ *
+ * S3C -  Nand Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_NAND_CORE_H
+#define __ASM_ARCH_NAND_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_nand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_NAND
+        s3c_device_nand.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_NAND_CORE_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 30844c263d0..85853f8c4c5 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -28,11 +28,17 @@ enum cd_types {
         S3C_SDHCI_CD_PERMANENT, /* no CD line, card permanently wired to host */
 };
 
+enum clk_types {
+        S3C_SDHCI_CLK_DIV_INTERNAL,     /* use mmc internal clock divider */
+        S3C_SDHCI_CLK_DIV_EXTERNAL,     /* use external clock divider */
+};
+
 /**
  * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
  * @max_width: The maximum number of data bits supported.
  * @host_caps: Standard MMC host capabilities bit field.
  * @cd_type: Type of Card Detection method (see cd_types enum above)
+ * @clk_type: Type of clock divider method (see clk_types enum above)
  * @ext_cd_init: Initialize external card detect subsystem. Called on
  *               sdhci-s3c driver probe when cd_type == S3C_SDHCI_CD_EXTERNAL.
  *               notify_func argument is a callback to the sdhci-s3c driver
@@ -59,6 +65,7 @@ struct s3c_sdhci_platdata {
         unsigned int    max_width;
         unsigned int    host_caps;
         enum cd_types   cd_type;
+        enum clk_types  clk_type;
 
         char            **clocks;       /* set of clock sources */
 
@@ -110,6 +117,10 @@ extern void s5pv210_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 extern void s5pv210_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5pv310_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
 
 /* S3C64XX SDHCI setup */
 
@@ -288,4 +299,57 @@ static inline void s5pv210_default_sdhci3(void) { }
 
 #endif /* CONFIG_S5PV210_SETUP_SDHCI */
 
+/* S5PV310 SDHCI setup */
+#ifdef CONFIG_S5PV310_SETUP_SDHCI
+extern char *s5pv310_hsmmc_clksrcs[4];
+
+extern void s5pv310_setup_sdhci_cfg_card(struct platform_device *dev,
+                                           void __iomem *r,
+                                           struct mmc_ios *ios,
+                                           struct mmc_card *card);
+
+static inline void s5pv310_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+        s3c_hsmmc0_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+        s3c_hsmmc0_def_platdata.cfg_gpio = s5pv310_setup_sdhci0_cfg_gpio;
+        s3c_hsmmc0_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+        s3c_hsmmc1_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+        s3c_hsmmc1_def_platdata.cfg_gpio = s5pv310_setup_sdhci1_cfg_gpio;
+        s3c_hsmmc1_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+        s3c_hsmmc2_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+        s3c_hsmmc2_def_platdata.cfg_gpio = s5pv310_setup_sdhci2_cfg_gpio;
+        s3c_hsmmc2_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+static inline void s5pv310_default_sdhci3(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC3
+        s3c_hsmmc3_def_platdata.clocks = s5pv310_hsmmc_clksrcs;
+        s3c_hsmmc3_def_platdata.cfg_gpio = s5pv310_setup_sdhci3_cfg_gpio;
+        s3c_hsmmc3_def_platdata.cfg_card = s5pv310_setup_sdhci_cfg_card;
+#endif
+}
+
+#else
+static inline void s5pv310_default_sdhci0(void) { }
+static inline void s5pv310_default_sdhci1(void) { }
+static inline void s5pv310_default_sdhci2(void) { }
+static inline void s5pv310_default_sdhci3(void) { }
+
+#endif /* CONFIG_S5PV310_SETUP_SDHCI */
+
 #endif /* __PLAT_S3C_SDHCI_H */