1 files changed, 60 insertions, 0 deletions

diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt
new file mode 100644
index 00000000000..c5b43061db3
--- /dev/null
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/pincfg.txt
@@ -0,0 +1,60 @@
+* Pin configuration nodes
+
+Required properties:
+- linux,phandle : phandle of this node; likely referenced by a QE
+  device.
+- pio-map : array of pin configurations.  Each pin is defined by 6
+  integers.  The six numbers are respectively: port, pin, dir,
+  open_drain, assignment, has_irq.
+  - port : port number of the pin; 0-6 represent port A-G in UM.
+  - pin : pin number in the port.
+  - dir : direction of the pin, should encode as follows:
+
+     0 = The pin is disabled
+     1 = The pin is an output
+     2 = The pin is an input
+     3 = The pin is I/O
+
+  - open_drain : indicates the pin is normal or wired-OR:
+
+     0 = The pin is actively driven as an output
+     1 = The pin is an open-drain driver. As an output, the pin is
+         driven active-low, otherwise it is three-stated.
+
+  - assignment : function number of the pin according to the Pin Assignment
+    tables in User Manual.  Each pin can have up to 4 possible functions in
+    QE and two options for CPM.
+  - has_irq : indicates if the pin is used as source of external
+    interrupts.
+
+Example:
+     ucc_pin@01 {
+        linux,phandle = <140001>;
+        pio-map = <
+        /* port  pin  dir  open_drain  assignment  has_irq */
+                0  3  1  0  1  0        /* TxD0 */
+                0  4  1  0  1  0        /* TxD1 */
+                0  5  1  0  1  0        /* TxD2 */
+                0  6  1  0  1  0        /* TxD3 */
+                1  6  1  0  3  0        /* TxD4 */
+                1  7  1  0  1  0        /* TxD5 */
+                1  9  1  0  2  0        /* TxD6 */
+                1  a  1  0  2  0        /* TxD7 */
+                0  9  2  0  1  0        /* RxD0 */
+                0  a  2  0  1  0        /* RxD1 */
+                0  b  2  0  1  0        /* RxD2 */
+                0  c  2  0  1  0        /* RxD3 */
+                0  d  2  0  1  0        /* RxD4 */
+                1  1  2  0  2  0        /* RxD5 */
+                1  0  2  0  2  0        /* RxD6 */
+                1  4  2  0  2  0        /* RxD7 */
+                0  7  1  0  1  0        /* TX_EN */
+                0  8  1  0  1  0        /* TX_ER */
+                0  f  2  0  1  0        /* RX_DV */
+                0  10 2  0  1  0        /* RX_ER */
+                0  0  2  0  1  0        /* RX_CLK */
+                2  9  1  0  3  0        /* GTX_CLK - CLK10 */
+                2  8  2  0  1  0>;      /* GTX125 - CLK9 */
+     };
+
+