1 files changed, 11 insertions, 7 deletions

diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index d365f227ac5..debe9445488 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -322,23 +322,27 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
                 dfl = 0;
                 if (str & I8042_STR_MUXERR) {
                         dbg("MUX error, status is %02x, data is %02x", str, data);
-                        switch (data) {
-                                default:
 /*
  * When MUXERR condition is signalled the data register can only contain
  * 0xfd, 0xfe or 0xff if implementation follows the spec. Unfortunately
- * it is not always the case. Some KBC just get confused which port the
- * data came from and signal error leaving the data intact. They _do not_
- * revert to legacy mode (actually I've never seen KBC reverting to legacy
- * mode yet, when we see one we'll add proper handling).
- * Anyway, we will assume that the data came from the same serio last byte
+ * it is not always the case. Some KBCs also report 0xfc when there is
+ * nothing connected to the port while others sometimes get confused which
+ * port the data came from and signal error leaving the data intact. They
+ * _do not_ revert to legacy mode (actually I've never seen KBC reverting
+ * to legacy mode yet, when we see one we'll add proper handling).
+ * Anyway, we process 0xfc, 0xfd, 0xfe and 0xff as timeouts, and for the
+ * rest assume that the data came from the same serio last byte
  * was transmitted (if transmission happened not too long ago).
  */
+
+                        switch (data) {
+                                default:
                                         if (time_before(jiffies, last_transmit + HZ/10)) {
                                                 str = last_str;
                                                 break;
                                         }
                                         /* fall through - report timeout */
+                                case 0xfc:
                                 case 0xfd:
                                 case 0xfe: dfl = SERIO_TIMEOUT; data = 0xfe; break;
                                 case 0xff: dfl = SERIO_PARITY;  data = 0xfe; break;