Merge branch 'x86/core' into tracing/textedit

Conflicts:
	arch/x86/Kconfig
	block/blktrace.c
	kernel/irq/handle.c

Semantic conflict:
	kernel/trace/blktrace.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 files changed, 1631 insertions, 1 deletions

diff --git a/lib/Kconfig b/lib/Kconfig
index 03c2c24b908..daa481824d9 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -98,6 +98,20 @@ config LZO_DECOMPRESS
         tristate
 
 #
+# These all provide a common interface (hence the apparent duplication with
+# ZLIB_INFLATE; DECOMPRESS_GZIP is just a wrapper.)
+#
+config DECOMPRESS_GZIP
+        select ZLIB_INFLATE
+        tristate
+
+config DECOMPRESS_BZIP2
+        tristate
+
+config DECOMPRESS_LZMA
+        tristate
+
+#
 # Generic allocator support is selected if needed
 #
 config GENERIC_ALLOCATOR
diff --git a/lib/Makefile b/lib/Makefile
index 32b0e64ded2..790de7c25d0 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -11,7 +11,8 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
          rbtree.o radix-tree.o dump_stack.o \
          idr.o int_sqrt.o extable.o prio_tree.o \
          sha1.o irq_regs.o reciprocal_div.o argv_split.o \
-         proportions.o prio_heap.o ratelimit.o show_mem.o is_single_threaded.o
+         proportions.o prio_heap.o ratelimit.o show_mem.o \
+         is_single_threaded.o decompress.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
@@ -65,6 +66,10 @@ obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
 obj-$(CONFIG_LZO_COMPRESS) += lzo/
 obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
 
+lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
+lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
+lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
+
 obj-$(CONFIG_TEXTSEARCH) += textsearch.o
 obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
 obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o
diff --git a/lib/decompress.c b/lib/decompress.c
new file mode 100644
index 00000000000..d2842f57167
--- /dev/null
+++ b/lib/decompress.c
@@ -0,0 +1,54 @@
+/*
+ * decompress.c
+ *
+ * Detect the decompression method based on magic number
+ */
+
+#include <linux/decompress/generic.h>
+
+#include <linux/decompress/bunzip2.h>
+#include <linux/decompress/unlzma.h>
+#include <linux/decompress/inflate.h>
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+#ifndef CONFIG_DECOMPRESS_GZIP
+# define gunzip NULL
+#endif
+#ifndef CONFIG_DECOMPRESS_BZIP2
+# define bunzip2 NULL
+#endif
+#ifndef CONFIG_DECOMPRESS_LZMA
+# define unlzma NULL
+#endif
+
+static const struct compress_format {
+        unsigned char magic[2];
+        const char *name;
+        decompress_fn decompressor;
+} compressed_formats[] = {
+        { {037, 0213}, "gzip", gunzip },
+        { {037, 0236}, "gzip", gunzip },
+        { {0x42, 0x5a}, "bzip2", bunzip2 },
+        { {0x5d, 0x00}, "lzma", unlzma },
+        { {0, 0}, NULL, NULL }
+};
+
+decompress_fn decompress_method(const unsigned char *inbuf, int len,
+                                const char **name)
+{
+        const struct compress_format *cf;
+
+        if (len < 2)
+                return NULL;    /* Need at least this much... */
+
+        for (cf = compressed_formats; cf->name; cf++) {
+                if (!memcmp(inbuf, cf->magic, 2))
+                        break;
+
+        }
+        if (name)
+                *name = cf->name;
+        return cf->decompressor;
+}
diff --git a/lib/decompress_bunzip2.c b/lib/decompress_bunzip2.c
new file mode 100644
index 00000000000..5d3ddb5fcfd
--- /dev/null
+++ b/lib/decompress_bunzip2.c
@@ -0,0 +1,735 @@
+/* vi: set sw = 4 ts = 4: */
+/*      Small bzip2 deflate implementation, by Rob Landley (rob@landley.net).
+
+        Based on bzip2 decompression code by Julian R Seward (jseward@acm.org),
+        which also acknowledges contributions by Mike Burrows, David Wheeler,
+        Peter Fenwick, Alistair Moffat, Radford Neal, Ian H. Witten,
+        Robert Sedgewick, and Jon L. Bentley.
+
+        This code is licensed under the LGPLv2:
+                LGPL (http://www.gnu.org/copyleft/lgpl.html
+*/
+
+/*
+        Size and speed optimizations by Manuel Novoa III  (mjn3@codepoet.org).
+
+        More efficient reading of Huffman codes, a streamlined read_bunzip()
+        function, and various other tweaks.  In (limited) tests, approximately
+        20% faster than bzcat on x86 and about 10% faster on arm.
+
+        Note that about 2/3 of the time is spent in read_unzip() reversing
+        the Burrows-Wheeler transformation.  Much of that time is delay
+        resulting from cache misses.
+
+        I would ask that anyone benefiting from this work, especially those
+        using it in commercial products, consider making a donation to my local
+        non-profit hospice organization in the name of the woman I loved, who
+        passed away Feb. 12, 2003.
+
+                In memory of Toni W. Hagan
+
+                Hospice of Acadiana, Inc.
+                2600 Johnston St., Suite 200
+                Lafayette, LA 70503-3240
+
+                Phone (337) 232-1234 or 1-800-738-2226
+                Fax   (337) 232-1297
+
+                http://www.hospiceacadiana.com/
+
+        Manuel
+ */
+
+/*
+        Made it fit for running in Linux Kernel by Alain Knaff (alain@knaff.lu)
+*/
+
+
+#ifndef STATIC
+#include <linux/decompress/bunzip2.h>
+#endif /* !STATIC */
+
+#include <linux/decompress/mm.h>
+
+#ifndef INT_MAX
+#define INT_MAX 0x7fffffff
+#endif
+
+/* Constants for Huffman coding */
+#define MAX_GROUPS              6
+#define GROUP_SIZE              50      /* 64 would have been more efficient */
+#define MAX_HUFCODE_BITS        20      /* Longest Huffman code allowed */
+#define MAX_SYMBOLS             258     /* 256 literals + RUNA + RUNB */
+#define SYMBOL_RUNA             0
+#define SYMBOL_RUNB             1
+
+/* Status return values */
+#define RETVAL_OK                       0
+#define RETVAL_LAST_BLOCK               (-1)
+#define RETVAL_NOT_BZIP_DATA            (-2)
+#define RETVAL_UNEXPECTED_INPUT_EOF     (-3)
+#define RETVAL_UNEXPECTED_OUTPUT_EOF    (-4)
+#define RETVAL_DATA_ERROR               (-5)
+#define RETVAL_OUT_OF_MEMORY            (-6)
+#define RETVAL_OBSOLETE_INPUT           (-7)
+
+/* Other housekeeping constants */
+#define BZIP2_IOBUF_SIZE                4096
+
+/* This is what we know about each Huffman coding group */
+struct group_data {
+        /* We have an extra slot at the end of limit[] for a sentinal value. */
+        int limit[MAX_HUFCODE_BITS+1];
+        int base[MAX_HUFCODE_BITS];
+        int permute[MAX_SYMBOLS];
+        int minLen, maxLen;
+};
+
+/* Structure holding all the housekeeping data, including IO buffers and
+   memory that persists between calls to bunzip */
+struct bunzip_data {
+        /* State for interrupting output loop */
+        int writeCopies, writePos, writeRunCountdown, writeCount, writeCurrent;
+        /* I/O tracking data (file handles, buffers, positions, etc.) */
+        int (*fill)(void*, unsigned int);
+        int inbufCount, inbufPos /*, outbufPos*/;
+        unsigned char *inbuf /*,*outbuf*/;
+        unsigned int inbufBitCount, inbufBits;
+        /* The CRC values stored in the block header and calculated from the
+        data */
+        unsigned int crc32Table[256], headerCRC, totalCRC, writeCRC;
+        /* Intermediate buffer and its size (in bytes) */
+        unsigned int *dbuf, dbufSize;
+        /* These things are a bit too big to go on the stack */
+        unsigned char selectors[32768];         /* nSelectors = 15 bits */
+        struct group_data groups[MAX_GROUPS];   /* Huffman coding tables */
+        int io_error;                   /* non-zero if we have IO error */
+};
+
+
+/* Return the next nnn bits of input.  All reads from the compressed input
+   are done through this function.  All reads are big endian */
+static unsigned int INIT get_bits(struct bunzip_data *bd, char bits_wanted)
+{
+        unsigned int bits = 0;
+
+        /* If we need to get more data from the byte buffer, do so.
+           (Loop getting one byte at a time to enforce endianness and avoid
+           unaligned access.) */
+        while (bd->inbufBitCount < bits_wanted) {
+                /* If we need to read more data from file into byte buffer, do
+                   so */
+                if (bd->inbufPos == bd->inbufCount) {
+                        if (bd->io_error)
+                                return 0;
+                        bd->inbufCount = bd->fill(bd->inbuf, BZIP2_IOBUF_SIZE);
+                        if (bd->inbufCount <= 0) {
+                                bd->io_error = RETVAL_UNEXPECTED_INPUT_EOF;
+                                return 0;
+                        }
+                        bd->inbufPos = 0;
+                }
+                /* Avoid 32-bit overflow (dump bit buffer to top of output) */
+                if (bd->inbufBitCount >= 24) {
+                        bits = bd->inbufBits&((1 << bd->inbufBitCount)-1);
+                        bits_wanted -= bd->inbufBitCount;
+                        bits <<= bits_wanted;
+                        bd->inbufBitCount = 0;
+                }
+                /* Grab next 8 bits of input from buffer. */
+                bd->inbufBits = (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++];
+                bd->inbufBitCount += 8;
+        }
+        /* Calculate result */
+        bd->inbufBitCount -= bits_wanted;
+        bits |= (bd->inbufBits >> bd->inbufBitCount)&((1 << bits_wanted)-1);
+
+        return bits;
+}
+
+/* Unpacks the next block and sets up for the inverse burrows-wheeler step. */
+
+static int INIT get_next_block(struct bunzip_data *bd)
+{
+        struct group_data *hufGroup = NULL;
+        int *base = NULL;
+        int *limit = NULL;
+        int dbufCount, nextSym, dbufSize, groupCount, selector,
+                i, j, k, t, runPos, symCount, symTotal, nSelectors,
+                byteCount[256];
+        unsigned char uc, symToByte[256], mtfSymbol[256], *selectors;
+        unsigned int *dbuf, origPtr;
+
+        dbuf = bd->dbuf;
+        dbufSize = bd->dbufSize;
+        selectors = bd->selectors;
+
+        /* Read in header signature and CRC, then validate signature.
+           (last block signature means CRC is for whole file, return now) */
+        i = get_bits(bd, 24);
+        j = get_bits(bd, 24);
+        bd->headerCRC = get_bits(bd, 32);
+        if ((i == 0x177245) && (j == 0x385090))
+                return RETVAL_LAST_BLOCK;
+        if ((i != 0x314159) || (j != 0x265359))
+                return RETVAL_NOT_BZIP_DATA;
+        /* We can add support for blockRandomised if anybody complains.
+           There was some code for this in busybox 1.0.0-pre3, but nobody ever
+           noticed that it didn't actually work. */
+        if (get_bits(bd, 1))
+                return RETVAL_OBSOLETE_INPUT;
+        origPtr = get_bits(bd, 24);
+        if (origPtr > dbufSize)
+                return RETVAL_DATA_ERROR;
+        /* mapping table: if some byte values are never used (encoding things
+           like ascii text), the compression code removes the gaps to have fewer
+           symbols to deal with, and writes a sparse bitfield indicating which
+           values were present.  We make a translation table to convert the
+           symbols back to the corresponding bytes. */
+        t = get_bits(bd, 16);
+        symTotal = 0;
+        for (i = 0; i < 16; i++) {
+                if (t&(1 << (15-i))) {
+                        k = get_bits(bd, 16);
+                        for (j = 0; j < 16; j++)
+                                if (k&(1 << (15-j)))
+                                        symToByte[symTotal++] = (16*i)+j;
+                }
+        }
+        /* How many different Huffman coding groups does this block use? */
+        groupCount = get_bits(bd, 3);
+        if (groupCount < 2 || groupCount > MAX_GROUPS)
+                return RETVAL_DATA_ERROR;
+        /* nSelectors: Every GROUP_SIZE many symbols we select a new
+           Huffman coding group.  Read in the group selector list,
+           which is stored as MTF encoded bit runs.  (MTF = Move To
+           Front, as each value is used it's moved to the start of the
+           list.) */
+        nSelectors = get_bits(bd, 15);
+        if (!nSelectors)
+                return RETVAL_DATA_ERROR;
+        for (i = 0; i < groupCount; i++)
+                mtfSymbol[i] = i;
+        for (i = 0; i < nSelectors; i++) {
+                /* Get next value */
+                for (j = 0; get_bits(bd, 1); j++)
+                        if (j >= groupCount)
+                                return RETVAL_DATA_ERROR;
+                /* Decode MTF to get the next selector */
+                uc = mtfSymbol[j];
+                for (; j; j--)
+                        mtfSymbol[j] = mtfSymbol[j-1];
+                mtfSymbol[0] = selectors[i] = uc;
+        }
+        /* Read the Huffman coding tables for each group, which code
+           for symTotal literal symbols, plus two run symbols (RUNA,
+           RUNB) */
+        symCount = symTotal+2;
+        for (j = 0; j < groupCount; j++) {
+                unsigned char length[MAX_SYMBOLS], temp[MAX_HUFCODE_BITS+1];
+                int     minLen, maxLen, pp;
+                /* Read Huffman code lengths for each symbol.  They're
+                   stored in a way similar to mtf; record a starting
+                   value for the first symbol, and an offset from the
+                   previous value for everys symbol after that.
+                   (Subtracting 1 before the loop and then adding it
+                   back at the end is an optimization that makes the
+                   test inside the loop simpler: symbol length 0
+                   becomes negative, so an unsigned inequality catches
+                   it.) */
+                t = get_bits(bd, 5)-1;
+                for (i = 0; i < symCount; i++) {
+                        for (;;) {
+                                if (((unsigned)t) > (MAX_HUFCODE_BITS-1))
+                                        return RETVAL_DATA_ERROR;
+
+                                /* If first bit is 0, stop.  Else
+                                   second bit indicates whether to
+                                   increment or decrement the value.
+                                   Optimization: grab 2 bits and unget
+                                   the second if the first was 0. */
+
+                                k = get_bits(bd, 2);
+                                if (k < 2) {
+                                        bd->inbufBitCount++;
+                                        break;
+                                }
+                                /* Add one if second bit 1, else
+                                 * subtract 1.  Avoids if/else */
+                                t += (((k+1)&2)-1);
+                        }
+                        /* Correct for the initial -1, to get the
+                         * final symbol length */
+                        length[i] = t+1;
+                }
+                /* Find largest and smallest lengths in this group */
+                minLen = maxLen = length[0];
+
+                for (i = 1; i < symCount; i++) {
+                        if (length[i] > maxLen)
+                                maxLen = length[i];
+                        else if (length[i] < minLen)
+                                minLen = length[i];
+                }
+
+                /* Calculate permute[], base[], and limit[] tables from
+                 * length[].
+                 *
+                 * permute[] is the lookup table for converting
+                 * Huffman coded symbols into decoded symbols.  base[]
+                 * is the amount to subtract from the value of a
+                 * Huffman symbol of a given length when using
+                 * permute[].
+                 *
+                 * limit[] indicates the largest numerical value a
+                 * symbol with a given number of bits can have.  This
+                 * is how the Huffman codes can vary in length: each
+                 * code with a value > limit[length] needs another
+                 * bit.
+                 */
+                hufGroup = bd->groups+j;
+                hufGroup->minLen = minLen;
+                hufGroup->maxLen = maxLen;
+                /* Note that minLen can't be smaller than 1, so we
+                   adjust the base and limit array pointers so we're
+                   not always wasting the first entry.  We do this
+                   again when using them (during symbol decoding).*/
+                base = hufGroup->base-1;
+                limit = hufGroup->limit-1;
+                /* Calculate permute[].  Concurently, initialize
+                 * temp[] and limit[]. */
+                pp = 0;
+                for (i = minLen; i <= maxLen; i++) {
+                        temp[i] = limit[i] = 0;
+                        for (t = 0; t < symCount; t++)
+                                if (length[t] == i)
+                                        hufGroup->permute[pp++] = t;
+                }
+                /* Count symbols coded for at each bit length */
+                for (i = 0; i < symCount; i++)
+                        temp[length[i]]++;
+                /* Calculate limit[] (the largest symbol-coding value
+                 *at each bit length, which is (previous limit <<
+                 *1)+symbols at this level), and base[] (number of
+                 *symbols to ignore at each bit length, which is limit
+                 *minus the cumulative count of symbols coded for
+                 *already). */
+                pp = t = 0;
+                for (i = minLen; i < maxLen; i++) {
+                        pp += temp[i];
+                        /* We read the largest possible symbol size
+                           and then unget bits after determining how
+                           many we need, and those extra bits could be
+                           set to anything.  (They're noise from
+                           future symbols.)  At each level we're
+                           really only interested in the first few
+                           bits, so here we set all the trailing
+                           to-be-ignored bits to 1 so they don't
+                           affect the value > limit[length]
+                           comparison. */
+                        limit[i] = (pp << (maxLen - i)) - 1;
+                        pp <<= 1;
+                        base[i+1] = pp-(t += temp[i]);
+                }
+                limit[maxLen+1] = INT_MAX; /* Sentinal value for
+                                            * reading next sym. */
+                limit[maxLen] = pp+temp[maxLen]-1;
+                base[minLen] = 0;
+        }
+        /* We've finished reading and digesting the block header.  Now
+           read this block's Huffman coded symbols from the file and
+           undo the Huffman coding and run length encoding, saving the
+           result into dbuf[dbufCount++] = uc */
+
+        /* Initialize symbol occurrence counters and symbol Move To
+         * Front table */
+        for (i = 0; i < 256; i++) {
+                byteCount[i] = 0;
+                mtfSymbol[i] = (unsigned char)i;
+        }
+        /* Loop through compressed symbols. */
+        runPos = dbufCount = symCount = selector = 0;
+        for (;;) {
+                /* Determine which Huffman coding group to use. */
+                if (!(symCount--)) {
+                        symCount = GROUP_SIZE-1;
+                        if (selector >= nSelectors)
+                                return RETVAL_DATA_ERROR;
+                        hufGroup = bd->groups+selectors[selector++];
+                        base = hufGroup->base-1;
+                        limit = hufGroup->limit-1;
+                }
+                /* Read next Huffman-coded symbol. */
+                /* Note: It is far cheaper to read maxLen bits and
+                   back up than it is to read minLen bits and then an
+                   additional bit at a time, testing as we go.
+                   Because there is a trailing last block (with file
+                   CRC), there is no danger of the overread causing an
+                   unexpected EOF for a valid compressed file.  As a
+                   further optimization, we do the read inline
+                   (falling back to a call to get_bits if the buffer
+                   runs dry).  The following (up to got_huff_bits:) is
+                   equivalent to j = get_bits(bd, hufGroup->maxLen);
+                 */
+                while (bd->inbufBitCount < hufGroup->maxLen) {
+                        if (bd->inbufPos == bd->inbufCount) {
+                                j = get_bits(bd, hufGroup->maxLen);
+                                goto got_huff_bits;
+                        }
+                        bd->inbufBits =
+                                (bd->inbufBits << 8)|bd->inbuf[bd->inbufPos++];
+                        bd->inbufBitCount += 8;
+                };
+                bd->inbufBitCount -= hufGroup->maxLen;
+                j = (bd->inbufBits >> bd->inbufBitCount)&
+                        ((1 << hufGroup->maxLen)-1);
+got_huff_bits:
+                /* Figure how how many bits are in next symbol and
+                 * unget extras */
+                i = hufGroup->minLen;
+                while (j > limit[i])
+                        ++i;
+                bd->inbufBitCount += (hufGroup->maxLen - i);
+                /* Huffman decode value to get nextSym (with bounds checking) */
+                if ((i > hufGroup->maxLen)
+                        || (((unsigned)(j = (j>>(hufGroup->maxLen-i))-base[i]))
+                                >= MAX_SYMBOLS))
+                        return RETVAL_DATA_ERROR;
+                nextSym = hufGroup->permute[j];
+                /* We have now decoded the symbol, which indicates
+                   either a new literal byte, or a repeated run of the
+                   most recent literal byte.  First, check if nextSym
+                   indicates a repeated run, and if so loop collecting
+                   how many times to repeat the last literal. */
+                if (((unsigned)nextSym) <= SYMBOL_RUNB) { /* RUNA or RUNB */
+                        /* If this is the start of a new run, zero out
+                         * counter */
+                        if (!runPos) {
+                                runPos = 1;
+                                t = 0;
+                        }
+                        /* Neat trick that saves 1 symbol: instead of
+                           or-ing 0 or 1 at each bit position, add 1
+                           or 2 instead.  For example, 1011 is 1 << 0
+                           + 1 << 1 + 2 << 2.  1010 is 2 << 0 + 2 << 1
+                           + 1 << 2.  You can make any bit pattern
+                           that way using 1 less symbol than the basic
+                           or 0/1 method (except all bits 0, which
+                           would use no symbols, but a run of length 0
+                           doesn't mean anything in this context).
+                           Thus space is saved. */
+                        t += (runPos << nextSym);
+                        /* +runPos if RUNA; +2*runPos if RUNB */
+
+                        runPos <<= 1;
+                        continue;
+                }
+                /* When we hit the first non-run symbol after a run,
+                   we now know how many times to repeat the last
+                   literal, so append that many copies to our buffer
+                   of decoded symbols (dbuf) now.  (The last literal
+                   used is the one at the head of the mtfSymbol
+                   array.) */
+                if (runPos) {
+                        runPos = 0;
+                        if (dbufCount+t >= dbufSize)
+                                return RETVAL_DATA_ERROR;
+
+                        uc = symToByte[mtfSymbol[0]];
+                        byteCount[uc] += t;
+                        while (t--)
+                                dbuf[dbufCount++] = uc;
+                }
+                /* Is this the terminating symbol? */
+                if (nextSym > symTotal)
+                        break;
+                /* At this point, nextSym indicates a new literal
+                   character.  Subtract one to get the position in the
+                   MTF array at which this literal is currently to be
+                   found.  (Note that the result can't be -1 or 0,
+                   because 0 and 1 are RUNA and RUNB.  But another
+                   instance of the first symbol in the mtf array,
+                   position 0, would have been handled as part of a
+                   run above.  Therefore 1 unused mtf position minus 2
+                   non-literal nextSym values equals -1.) */
+                if (dbufCount >= dbufSize)
+                        return RETVAL_DATA_ERROR;
+                i = nextSym - 1;
+                uc = mtfSymbol[i];
+                /* Adjust the MTF array.  Since we typically expect to
+                 *move only a small number of symbols, and are bound
+                 *by 256 in any case, using memmove here would
+                 *typically be bigger and slower due to function call
+                 *overhead and other assorted setup costs. */
+                do {
+                        mtfSymbol[i] = mtfSymbol[i-1];
+                } while (--i);
+                mtfSymbol[0] = uc;
+                uc = symToByte[uc];
+                /* We have our literal byte.  Save it into dbuf. */
+                byteCount[uc]++;
+                dbuf[dbufCount++] = (unsigned int)uc;
+        }
+        /* At this point, we've read all the Huffman-coded symbols
+           (and repeated runs) for this block from the input stream,
+           and decoded them into the intermediate buffer.  There are
+           dbufCount many decoded bytes in dbuf[].  Now undo the
+           Burrows-Wheeler transform on dbuf.  See
+           http://dogma.net/markn/articles/bwt/bwt.htm
+         */
+        /* Turn byteCount into cumulative occurrence counts of 0 to n-1. */
+        j = 0;
+        for (i = 0; i < 256; i++) {
+                k = j+byteCount[i];
+                byteCount[i] = j;
+                j = k;
+        }
+        /* Figure out what order dbuf would be in if we sorted it. */
+        for (i = 0; i < dbufCount; i++) {
+                uc = (unsigned char)(dbuf[i] & 0xff);
+                dbuf[byteCount[uc]] |= (i << 8);
+                byteCount[uc]++;
+        }
+        /* Decode first byte by hand to initialize "previous" byte.
+           Note that it doesn't get output, and if the first three
+           characters are identical it doesn't qualify as a run (hence
+           writeRunCountdown = 5). */
+        if (dbufCount) {
+                if (origPtr >= dbufCount)
+                        return RETVAL_DATA_ERROR;
+                bd->writePos = dbuf[origPtr];
+                bd->writeCurrent = (unsigned char)(bd->writePos&0xff);
+                bd->writePos >>= 8;
+                bd->writeRunCountdown = 5;
+        }
+        bd->writeCount = dbufCount;
+
+        return RETVAL_OK;
+}
+
+/* Undo burrows-wheeler transform on intermediate buffer to produce output.
+   If start_bunzip was initialized with out_fd =-1, then up to len bytes of
+   data are written to outbuf.  Return value is number of bytes written or
+   error (all errors are negative numbers).  If out_fd!=-1, outbuf and len
+   are ignored, data is written to out_fd and return is RETVAL_OK or error.
+*/
+
+static int INIT read_bunzip(struct bunzip_data *bd, char *outbuf, int len)
+{
+        const unsigned int *dbuf;
+        int pos, xcurrent, previous, gotcount;
+
+        /* If last read was short due to end of file, return last block now */
+        if (bd->writeCount < 0)
+                return bd->writeCount;
+
+        gotcount = 0;
+        dbuf = bd->dbuf;
+        pos = bd->writePos;
+        xcurrent = bd->writeCurrent;
+
+        /* We will always have pending decoded data to write into the output
+           buffer unless this is the very first call (in which case we haven't
+           Huffman-decoded a block into the intermediate buffer yet). */
+
+        if (bd->writeCopies) {
+                /* Inside the loop, writeCopies means extra copies (beyond 1) */
+                --bd->writeCopies;
+                /* Loop outputting bytes */
+                for (;;) {
+                        /* If the output buffer is full, snapshot
+                         * state and return */
+                        if (gotcount >= len) {
+                                bd->writePos = pos;
+                                bd->writeCurrent = xcurrent;
+                                bd->writeCopies++;
+                                return len;
+                        }
+                        /* Write next byte into output buffer, updating CRC */
+                        outbuf[gotcount++] = xcurrent;
+                        bd->writeCRC = (((bd->writeCRC) << 8)
+                                ^bd->crc32Table[((bd->writeCRC) >> 24)
+                                ^xcurrent]);
+                        /* Loop now if we're outputting multiple
+                         * copies of this byte */
+                        if (bd->writeCopies) {
+                                --bd->writeCopies;
+                                continue;
+                        }
+decode_next_byte:
+                        if (!bd->writeCount--)
+                                break;
+                        /* Follow sequence vector to undo
+                         * Burrows-Wheeler transform */
+                        previous = xcurrent;
+                        pos = dbuf[pos];
+                        xcurrent = pos&0xff;
+                        pos >>= 8;
+                        /* After 3 consecutive copies of the same
+                           byte, the 4th is a repeat count.  We count
+                           down from 4 instead *of counting up because
+                           testing for non-zero is faster */
+                        if (--bd->writeRunCountdown) {
+                                if (xcurrent != previous)
+                                        bd->writeRunCountdown = 4;
+                        } else {
+                                /* We have a repeated run, this byte
+                                 * indicates the count */
+                                bd->writeCopies = xcurrent;
+                                xcurrent = previous;
+                                bd->writeRunCountdown = 5;
+                                /* Sometimes there are just 3 bytes
+                                 * (run length 0) */
+                                if (!bd->writeCopies)
+                                        goto decode_next_byte;
+                                /* Subtract the 1 copy we'd output
+                                 * anyway to get extras */
+                                --bd->writeCopies;
+                        }
+                }
+                /* Decompression of this block completed successfully */
+                bd->writeCRC = ~bd->writeCRC;
+                bd->totalCRC = ((bd->totalCRC << 1) |
+                                (bd->totalCRC >> 31)) ^ bd->writeCRC;
+                /* If this block had a CRC error, force file level CRC error. */
+                if (bd->writeCRC != bd->headerCRC) {
+                        bd->totalCRC = bd->headerCRC+1;
+                        return RETVAL_LAST_BLOCK;
+                }
+        }
+
+        /* Refill the intermediate buffer by Huffman-decoding next
+         * block of input */
+        /* (previous is just a convenient unused temp variable here) */
+        previous = get_next_block(bd);
+        if (previous) {
+                bd->writeCount = previous;
+                return (previous != RETVAL_LAST_BLOCK) ? previous : gotcount;
+        }
+        bd->writeCRC = 0xffffffffUL;
+        pos = bd->writePos;
+        xcurrent = bd->writeCurrent;
+        goto decode_next_byte;
+}
+
+static int INIT nofill(void *buf, unsigned int len)
+{
+        return -1;
+}
+
+/* Allocate the structure, read file header.  If in_fd ==-1, inbuf must contain
+   a complete bunzip file (len bytes long).  If in_fd!=-1, inbuf and len are
+   ignored, and data is read from file handle into temporary buffer. */
+static int INIT start_bunzip(struct bunzip_data **bdp, void *inbuf, int len,
+                             int (*fill)(void*, unsigned int))
+{
+        struct bunzip_data *bd;
+        unsigned int i, j, c;
+        const unsigned int BZh0 =
+                (((unsigned int)'B') << 24)+(((unsigned int)'Z') << 16)
+                +(((unsigned int)'h') << 8)+(unsigned int)'0';
+
+        /* Figure out how much data to allocate */
+        i = sizeof(struct bunzip_data);
+
+        /* Allocate bunzip_data.  Most fields initialize to zero. */
+        bd = *bdp = malloc(i);
+        memset(bd, 0, sizeof(struct bunzip_data));
+        /* Setup input buffer */
+        bd->inbuf = inbuf;
+        bd->inbufCount = len;
+        if (fill != NULL)
+                bd->fill = fill;
+        else
+                bd->fill = nofill;
+
+        /* Init the CRC32 table (big endian) */
+        for (i = 0; i < 256; i++) {
+                c = i << 24;
+                for (j = 8; j; j--)
+                        c = c&0x80000000 ? (c << 1)^0x04c11db7 : (c << 1);
+                bd->crc32Table[i] = c;
+        }
+
+        /* Ensure that file starts with "BZh['1'-'9']." */
+        i = get_bits(bd, 32);
+        if (((unsigned int)(i-BZh0-1)) >= 9)
+                return RETVAL_NOT_BZIP_DATA;
+
+        /* Fourth byte (ascii '1'-'9'), indicates block size in units of 100k of
+           uncompressed data.  Allocate intermediate buffer for block. */
+        bd->dbufSize = 100000*(i-BZh0);
+
+        bd->dbuf = large_malloc(bd->dbufSize * sizeof(int));
+        return RETVAL_OK;
+}
+
+/* Example usage: decompress src_fd to dst_fd.  (Stops at end of bzip2 data,
+   not end of file.) */
+STATIC int INIT bunzip2(unsigned char *buf, int len,
+                        int(*fill)(void*, unsigned int),
+                        int(*flush)(void*, unsigned int),
+                        unsigned char *outbuf,
+                        int *pos,
+                        void(*error_fn)(char *x))
+{
+        struct bunzip_data *bd;
+        int i = -1;
+        unsigned char *inbuf;
+
+        set_error_fn(error_fn);
+        if (flush)
+                outbuf = malloc(BZIP2_IOBUF_SIZE);
+        else
+                len -= 4; /* Uncompressed size hack active in pre-boot
+                             environment */
+        if (!outbuf) {
+                error("Could not allocate output bufer");
+                return -1;
+        }
+        if (buf)
+                inbuf = buf;
+        else
+                inbuf = malloc(BZIP2_IOBUF_SIZE);
+        if (!inbuf) {
+                error("Could not allocate input bufer");
+                goto exit_0;
+        }
+        i = start_bunzip(&bd, inbuf, len, fill);
+        if (!i) {
+                for (;;) {
+                        i = read_bunzip(bd, outbuf, BZIP2_IOBUF_SIZE);
+                        if (i <= 0)
+                                break;
+                        if (!flush)
+                                outbuf += i;
+                        else
+                                if (i != flush(outbuf, i)) {
+                                        i = RETVAL_UNEXPECTED_OUTPUT_EOF;
+                                        break;
+                                }
+                }
+        }
+        /* Check CRC and release memory */
+        if (i == RETVAL_LAST_BLOCK) {
+                if (bd->headerCRC != bd->totalCRC)
+                        error("Data integrity error when decompressing.");
+                else
+                        i = RETVAL_OK;
+        } else if (i == RETVAL_UNEXPECTED_OUTPUT_EOF) {
+                error("Compressed file ends unexpectedly");
+        }
+        if (bd->dbuf)
+                large_free(bd->dbuf);
+        if (pos)
+                *pos = bd->inbufPos;
+        free(bd);
+        if (!buf)
+                free(inbuf);
+exit_0:
+        if (flush)
+                free(outbuf);
+        return i;
+}
+
+#define decompress bunzip2
diff --git a/lib/decompress_inflate.c b/lib/decompress_inflate.c
new file mode 100644
index 00000000000..839a329b4fc
--- /dev/null
+++ b/lib/decompress_inflate.c
@@ -0,0 +1,167 @@
+#ifdef STATIC
+/* Pre-boot environment: included */
+
+/* prevent inclusion of _LINUX_KERNEL_H in pre-boot environment: lots
+ * errors about console_printk etc... on ARM */
+#define _LINUX_KERNEL_H
+
+#include "zlib_inflate/inftrees.c"
+#include "zlib_inflate/inffast.c"
+#include "zlib_inflate/inflate.c"
+
+#else /* STATIC */
+/* initramfs et al: linked */
+
+#include <linux/zutil.h>
+
+#include "zlib_inflate/inftrees.h"
+#include "zlib_inflate/inffast.h"
+#include "zlib_inflate/inflate.h"
+
+#include "zlib_inflate/infutil.h"
+
+#endif /* STATIC */
+
+#include <linux/decompress/mm.h>
+
+#define INBUF_LEN (16*1024)
+
+/* Included from initramfs et al code */
+STATIC int INIT gunzip(unsigned char *buf, int len,
+                       int(*fill)(void*, unsigned int),
+                       int(*flush)(void*, unsigned int),
+                       unsigned char *out_buf,
+                       int *pos,
+                       void(*error_fn)(char *x)) {
+        u8 *zbuf;
+        struct z_stream_s *strm;
+        int rc;
+        size_t out_len;
+
+        set_error_fn(error_fn);
+        rc = -1;
+        if (flush) {
+                out_len = 0x8000; /* 32 K */
+                out_buf = malloc(out_len);
+        } else {
+                out_len = 0x7fffffff; /* no limit */
+        }
+        if (!out_buf) {
+                error("Out of memory while allocating output buffer");
+                goto gunzip_nomem1;
+        }
+
+        if (buf)
+                zbuf = buf;
+        else {
+                zbuf = malloc(INBUF_LEN);
+                len = 0;
+        }
+        if (!zbuf) {
+                error("Out of memory while allocating input buffer");
+                goto gunzip_nomem2;
+        }
+
+        strm = malloc(sizeof(*strm));
+        if (strm == NULL) {
+                error("Out of memory while allocating z_stream");
+                goto gunzip_nomem3;
+        }
+
+        strm->workspace = malloc(flush ? zlib_inflate_workspacesize() :
+                                 sizeof(struct inflate_state));
+        if (strm->workspace == NULL) {
+                error("Out of memory while allocating workspace");
+                goto gunzip_nomem4;
+        }
+
+        if (len == 0)
+                len = fill(zbuf, INBUF_LEN);
+
+        /* verify the gzip header */
+        if (len < 10 ||
+           zbuf[0] != 0x1f || zbuf[1] != 0x8b || zbuf[2] != 0x08) {
+                if (pos)
+                        *pos = 0;
+                error("Not a gzip file");
+                goto gunzip_5;
+        }
+
+        /* skip over gzip header (1f,8b,08... 10 bytes total +
+         * possible asciz filename)
+         */
+        strm->next_in = zbuf + 10;
+        /* skip over asciz filename */
+        if (zbuf[3] & 0x8) {
+                while (strm->next_in[0])
+                        strm->next_in++;
+                strm->next_in++;
+        }
+        strm->avail_in = len - (strm->next_in - zbuf);
+
+        strm->next_out = out_buf;
+        strm->avail_out = out_len;
+
+        rc = zlib_inflateInit2(strm, -MAX_WBITS);
+
+        if (!flush) {
+                WS(strm)->inflate_state.wsize = 0;
+                WS(strm)->inflate_state.window = NULL;
+        }
+
+        while (rc == Z_OK) {
+                if (strm->avail_in == 0) {
+                        /* TODO: handle case where both pos and fill are set */
+                        len = fill(zbuf, INBUF_LEN);
+                        if (len < 0) {
+                                rc = -1;
+                                error("read error");
+                                break;
+                        }
+                        strm->next_in = zbuf;
+                        strm->avail_in = len;
+                }
+                rc = zlib_inflate(strm, 0);
+
+                /* Write any data generated */
+                if (flush && strm->next_out > out_buf) {
+                        int l = strm->next_out - out_buf;
+                        if (l != flush(out_buf, l)) {
+                                rc = -1;
+                                error("write error");
+                                break;
+                        }
+                        strm->next_out = out_buf;
+                        strm->avail_out = out_len;
+                }
+
+                /* after Z_FINISH, only Z_STREAM_END is "we unpacked it all" */
+                if (rc == Z_STREAM_END) {
+                        rc = 0;
+                        break;
+                } else if (rc != Z_OK) {
+                        error("uncompression error");
+                        rc = -1;
+                }
+        }
+
+        zlib_inflateEnd(strm);
+        if (pos)
+                /* add + 8 to skip over trailer */
+                *pos = strm->next_in - zbuf+8;
+
+gunzip_5:
+        free(strm->workspace);
+gunzip_nomem4:
+        free(strm);
+gunzip_nomem3:
+        if (!buf)
+                free(zbuf);
+gunzip_nomem2:
+        if (flush)
+                free(out_buf);
+gunzip_nomem1:
+        return rc; /* returns Z_OK (0) if successful */
+}
+
+#define decompress gunzip
diff --git a/lib/decompress_unlzma.c b/lib/decompress_unlzma.c
new file mode 100644
index 00000000000..546f2f4c157
--- /dev/null
+++ b/lib/decompress_unlzma.c
@@ -0,0 +1,647 @@
+/* Lzma decompressor for Linux kernel. Shamelessly snarfed
+ *from busybox 1.1.1
+ *
+ *Linux kernel adaptation
+ *Copyright (C) 2006  Alain < alain@knaff.lu >
+ *
+ *Based on small lzma deflate implementation/Small range coder
+ *implementation for lzma.
+ *Copyright (C) 2006  Aurelien Jacobs < aurel@gnuage.org >
+ *
+ *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
+ *Copyright (C) 1999-2005  Igor Pavlov
+ *
+ *Copyrights of the parts, see headers below.
+ *
+ *
+ *This program is free software; you can redistribute it and/or
+ *modify it under the terms of the GNU Lesser General Public
+ *License as published by the Free Software Foundation; either
+ *version 2.1 of the License, or (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ *but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *Lesser General Public License for more details.
+ *
+ *You should have received a copy of the GNU Lesser General Public
+ *License along with this library; if not, write to the Free Software
+ *Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef STATIC
+#include <linux/decompress/unlzma.h>
+#endif /* STATIC */
+
+#include <linux/decompress/mm.h>
+
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+
+static long long INIT read_int(unsigned char *ptr, int size)
+{
+        int i;
+        long long ret = 0;
+
+        for (i = 0; i < size; i++)
+                ret = (ret << 8) | ptr[size-i-1];
+        return ret;
+}
+
+#define ENDIAN_CONVERT(x) \
+  x = (typeof(x))read_int((unsigned char *)&x, sizeof(x))
+
+
+/* Small range coder implementation for lzma.
+ *Copyright (C) 2006  Aurelien Jacobs < aurel@gnuage.org >
+ *
+ *Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
+ *Copyright (c) 1999-2005  Igor Pavlov
+ */
+
+#include <linux/compiler.h>
+
+#define LZMA_IOBUF_SIZE 0x10000
+
+struct rc {
+        int (*fill)(void*, unsigned int);
+        uint8_t *ptr;
+        uint8_t *buffer;
+        uint8_t *buffer_end;
+        int buffer_size;
+        uint32_t code;
+        uint32_t range;
+        uint32_t bound;
+};
+
+
+#define RC_TOP_BITS 24
+#define RC_MOVE_BITS 5
+#define RC_MODEL_TOTAL_BITS 11
+
+
+/* Called twice: once at startup and once in rc_normalize() */
+static void INIT rc_read(struct rc *rc)
+{
+        rc->buffer_size = rc->fill((char *)rc->buffer, LZMA_IOBUF_SIZE);
+        if (rc->buffer_size <= 0)
+                error("unexpected EOF");
+        rc->ptr = rc->buffer;
+        rc->buffer_end = rc->buffer + rc->buffer_size;
+}
+
+/* Called once */
+static inline void INIT rc_init(struct rc *rc,
+                                       int (*fill)(void*, unsigned int),
+                                       char *buffer, int buffer_size)
+{
+        rc->fill = fill;
+        rc->buffer = (uint8_t *)buffer;
+        rc->buffer_size = buffer_size;
+        rc->buffer_end = rc->buffer + rc->buffer_size;
+        rc->ptr = rc->buffer;
+
+        rc->code = 0;
+        rc->range = 0xFFFFFFFF;
+}
+
+static inline void INIT rc_init_code(struct rc *rc)
+{
+        int i;
+
+        for (i = 0; i < 5; i++) {
+                if (rc->ptr >= rc->buffer_end)
+                        rc_read(rc);
+                rc->code = (rc->code << 8) | *rc->ptr++;
+        }
+}
+
+
+/* Called once. TODO: bb_maybe_free() */
+static inline void INIT rc_free(struct rc *rc)
+{
+        free(rc->buffer);
+}
+
+/* Called twice, but one callsite is in inline'd rc_is_bit_0_helper() */
+static void INIT rc_do_normalize(struct rc *rc)
+{
+        if (rc->ptr >= rc->buffer_end)
+                rc_read(rc);
+        rc->range <<= 8;
+        rc->code = (rc->code << 8) | *rc->ptr++;
+}
+static inline void INIT rc_normalize(struct rc *rc)
+{
+        if (rc->range < (1 << RC_TOP_BITS))
+                rc_do_normalize(rc);
+}
+
+/* Called 9 times */
+/* Why rc_is_bit_0_helper exists?
+ *Because we want to always expose (rc->code < rc->bound) to optimizer
+ */
+static inline uint32_t INIT rc_is_bit_0_helper(struct rc *rc, uint16_t *p)
+{
+        rc_normalize(rc);
+        rc->bound = *p * (rc->range >> RC_MODEL_TOTAL_BITS);
+        return rc->bound;
+}
+static inline int INIT rc_is_bit_0(struct rc *rc, uint16_t *p)
+{
+        uint32_t t = rc_is_bit_0_helper(rc, p);
+        return rc->code < t;
+}
+
+/* Called ~10 times, but very small, thus inlined */
+static inline void INIT rc_update_bit_0(struct rc *rc, uint16_t *p)
+{
+        rc->range = rc->bound;
+        *p += ((1 << RC_MODEL_TOTAL_BITS) - *p) >> RC_MOVE_BITS;
+}
+static inline void rc_update_bit_1(struct rc *rc, uint16_t *p)
+{
+        rc->range -= rc->bound;
+        rc->code -= rc->bound;
+        *p -= *p >> RC_MOVE_BITS;
+}
+
+/* Called 4 times in unlzma loop */
+static int INIT rc_get_bit(struct rc *rc, uint16_t *p, int *symbol)
+{
+        if (rc_is_bit_0(rc, p)) {
+                rc_update_bit_0(rc, p);
+                *symbol *= 2;
+                return 0;
+        } else {
+                rc_update_bit_1(rc, p);
+                *symbol = *symbol * 2 + 1;
+                return 1;
+        }
+}
+
+/* Called once */
+static inline int INIT rc_direct_bit(struct rc *rc)
+{
+        rc_normalize(rc);
+        rc->range >>= 1;
+        if (rc->code >= rc->range) {
+                rc->code -= rc->range;
+                return 1;
+        }
+        return 0;
+}
+
+/* Called twice */
+static inline void INIT
+rc_bit_tree_decode(struct rc *rc, uint16_t *p, int num_levels, int *symbol)
+{
+        int i = num_levels;
+
+        *symbol = 1;
+        while (i--)
+                rc_get_bit(rc, p + *symbol, symbol);
+        *symbol -= 1 << num_levels;
+}
+
+
+/*
+ * Small lzma deflate implementation.
+ * Copyright (C) 2006  Aurelien Jacobs < aurel@gnuage.org >
+ *
+ * Based on LzmaDecode.c from the LZMA SDK 4.22 (http://www.7-zip.org/)
+ * Copyright (C) 1999-2005  Igor Pavlov
+ */
+
+
+struct lzma_header {
+        uint8_t pos;
+        uint32_t dict_size;
+        uint64_t dst_size;
+} __attribute__ ((packed)) ;
+
+
+#define LZMA_BASE_SIZE 1846
+#define LZMA_LIT_SIZE 768
+
+#define LZMA_NUM_POS_BITS_MAX 4
+
+#define LZMA_LEN_NUM_LOW_BITS 3
+#define LZMA_LEN_NUM_MID_BITS 3
+#define LZMA_LEN_NUM_HIGH_BITS 8
+
+#define LZMA_LEN_CHOICE 0
+#define LZMA_LEN_CHOICE_2 (LZMA_LEN_CHOICE + 1)
+#define LZMA_LEN_LOW (LZMA_LEN_CHOICE_2 + 1)
+#define LZMA_LEN_MID (LZMA_LEN_LOW \
+                      + (1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_LOW_BITS)))
+#define LZMA_LEN_HIGH (LZMA_LEN_MID \
+                       +(1 << (LZMA_NUM_POS_BITS_MAX + LZMA_LEN_NUM_MID_BITS)))
+#define LZMA_NUM_LEN_PROBS (LZMA_LEN_HIGH + (1 << LZMA_LEN_NUM_HIGH_BITS))
+
+#define LZMA_NUM_STATES 12
+#define LZMA_NUM_LIT_STATES 7
+
+#define LZMA_START_POS_MODEL_INDEX 4
+#define LZMA_END_POS_MODEL_INDEX 14
+#define LZMA_NUM_FULL_DISTANCES (1 << (LZMA_END_POS_MODEL_INDEX >> 1))
+
+#define LZMA_NUM_POS_SLOT_BITS 6
+#define LZMA_NUM_LEN_TO_POS_STATES 4
+
+#define LZMA_NUM_ALIGN_BITS 4
+
+#define LZMA_MATCH_MIN_LEN 2
+
+#define LZMA_IS_MATCH 0
+#define LZMA_IS_REP (LZMA_IS_MATCH + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX))
+#define LZMA_IS_REP_G0 (LZMA_IS_REP + LZMA_NUM_STATES)
+#define LZMA_IS_REP_G1 (LZMA_IS_REP_G0 + LZMA_NUM_STATES)
+#define LZMA_IS_REP_G2 (LZMA_IS_REP_G1 + LZMA_NUM_STATES)
+#define LZMA_IS_REP_0_LONG (LZMA_IS_REP_G2 + LZMA_NUM_STATES)
+#define LZMA_POS_SLOT (LZMA_IS_REP_0_LONG \
+                       + (LZMA_NUM_STATES << LZMA_NUM_POS_BITS_MAX))
+#define LZMA_SPEC_POS (LZMA_POS_SLOT \
+                       +(LZMA_NUM_LEN_TO_POS_STATES << LZMA_NUM_POS_SLOT_BITS))
+#define LZMA_ALIGN (LZMA_SPEC_POS \
+                    + LZMA_NUM_FULL_DISTANCES - LZMA_END_POS_MODEL_INDEX)
+#define LZMA_LEN_CODER (LZMA_ALIGN + (1 << LZMA_NUM_ALIGN_BITS))
+#define LZMA_REP_LEN_CODER (LZMA_LEN_CODER + LZMA_NUM_LEN_PROBS)
+#define LZMA_LITERAL (LZMA_REP_LEN_CODER + LZMA_NUM_LEN_PROBS)
+
+
+struct writer {
+        uint8_t *buffer;
+        uint8_t previous_byte;
+        size_t buffer_pos;
+        int bufsize;
+        size_t global_pos;
+        int(*flush)(void*, unsigned int);
+        struct lzma_header *header;
+};
+
+struct cstate {
+        int state;
+        uint32_t rep0, rep1, rep2, rep3;
+};
+
+static inline size_t INIT get_pos(struct writer *wr)
+{
+        return
+                wr->global_pos + wr->buffer_pos;
+}
+
+static inline uint8_t INIT peek_old_byte(struct writer *wr,
+                                                uint32_t offs)
+{
+        if (!wr->flush) {
+                int32_t pos;
+                while (offs > wr->header->dict_size)
+                        offs -= wr->header->dict_size;
+                pos = wr->buffer_pos - offs;
+                return wr->buffer[pos];
+        } else {
+                uint32_t pos = wr->buffer_pos - offs;
+                while (pos >= wr->header->dict_size)
+                        pos += wr->header->dict_size;
+                return wr->buffer[pos];
+        }
+
+}
+
+static inline void INIT write_byte(struct writer *wr, uint8_t byte)
+{
+        wr->buffer[wr->buffer_pos++] = wr->previous_byte = byte;
+        if (wr->flush && wr->buffer_pos == wr->header->dict_size) {
+                wr->buffer_pos = 0;
+                wr->global_pos += wr->header->dict_size;
+                wr->flush((char *)wr->buffer, wr->header->dict_size);
+        }
+}
+
+
+static inline void INIT copy_byte(struct writer *wr, uint32_t offs)
+{
+        write_byte(wr, peek_old_byte(wr, offs));
+}
+
+static inline void INIT copy_bytes(struct writer *wr,
+                                         uint32_t rep0, int len)
+{
+        do {
+                copy_byte(wr, rep0);
+                len--;
+        } while (len != 0 && wr->buffer_pos < wr->header->dst_size);
+}
+
+static inline void INIT process_bit0(struct writer *wr, struct rc *rc,
+                                     struct cstate *cst, uint16_t *p,
+                                     int pos_state, uint16_t *prob,
+                                     int lc, uint32_t literal_pos_mask) {
+        int mi = 1;
+        rc_update_bit_0(rc, prob);
+        prob = (p + LZMA_LITERAL +
+                (LZMA_LIT_SIZE
+                 * (((get_pos(wr) & literal_pos_mask) << lc)
+                    + (wr->previous_byte >> (8 - lc))))
+                );
+
+        if (cst->state >= LZMA_NUM_LIT_STATES) {
+                int match_byte = peek_old_byte(wr, cst->rep0);
+                do {
+                        int bit;
+                        uint16_t *prob_lit;
+
+                        match_byte <<= 1;
+                        bit = match_byte & 0x100;
+                        prob_lit = prob + 0x100 + bit + mi;
+                        if (rc_get_bit(rc, prob_lit, &mi)) {
+                                if (!bit)
+                                        break;
+                        } else {
+                                if (bit)
+                                        break;
+                        }
+                } while (mi < 0x100);
+        }
+        while (mi < 0x100) {
+                uint16_t *prob_lit = prob + mi;
+                rc_get_bit(rc, prob_lit, &mi);
+        }
+        write_byte(wr, mi);
+        if (cst->state < 4)
+                cst->state = 0;
+        else if (cst->state < 10)
+                cst->state -= 3;
+        else
+                cst->state -= 6;
+}
+
+static inline void INIT process_bit1(struct writer *wr, struct rc *rc,
+                                            struct cstate *cst, uint16_t *p,
+                                            int pos_state, uint16_t *prob) {
+  int offset;
+        uint16_t *prob_len;
+        int num_bits;
+        int len;
+
+        rc_update_bit_1(rc, prob);
+        prob = p + LZMA_IS_REP + cst->state;
+        if (rc_is_bit_0(rc, prob)) {
+                rc_update_bit_0(rc, prob);
+                cst->rep3 = cst->rep2;
+                cst->rep2 = cst->rep1;
+                cst->rep1 = cst->rep0;
+                cst->state = cst->state < LZMA_NUM_LIT_STATES ? 0 : 3;
+                prob = p + LZMA_LEN_CODER;
+        } else {
+                rc_update_bit_1(rc, prob);
+                prob = p + LZMA_IS_REP_G0 + cst->state;
+                if (rc_is_bit_0(rc, prob)) {
+                        rc_update_bit_0(rc, prob);
+                        prob = (p + LZMA_IS_REP_0_LONG
+                                + (cst->state <<
+                                   LZMA_NUM_POS_BITS_MAX) +
+                                pos_state);
+                        if (rc_is_bit_0(rc, prob)) {
+                                rc_update_bit_0(rc, prob);
+
+                                cst->state = cst->state < LZMA_NUM_LIT_STATES ?
+                                        9 : 11;
+                                copy_byte(wr, cst->rep0);
+                                return;
+                        } else {
+                                rc_update_bit_1(rc, prob);
+                        }
+                } else {
+                        uint32_t distance;
+
+                        rc_update_bit_1(rc, prob);
+                        prob = p + LZMA_IS_REP_G1 + cst->state;
+                        if (rc_is_bit_0(rc, prob)) {
+                                rc_update_bit_0(rc, prob);
+                                distance = cst->rep1;
+                        } else {
+                                rc_update_bit_1(rc, prob);
+                                prob = p + LZMA_IS_REP_G2 + cst->state;
+                                if (rc_is_bit_0(rc, prob)) {
+                                        rc_update_bit_0(rc, prob);
+                                        distance = cst->rep2;
+                                } else {
+                                        rc_update_bit_1(rc, prob);
+                                        distance = cst->rep3;
+                                        cst->rep3 = cst->rep2;
+                                }
+                                cst->rep2 = cst->rep1;
+                        }
+                        cst->rep1 = cst->rep0;
+                        cst->rep0 = distance;
+                }
+                cst->state = cst->state < LZMA_NUM_LIT_STATES ? 8 : 11;
+                prob = p + LZMA_REP_LEN_CODER;
+        }
+
+        prob_len = prob + LZMA_LEN_CHOICE;
+        if (rc_is_bit_0(rc, prob_len)) {
+                rc_update_bit_0(rc, prob_len);
+                prob_len = (prob + LZMA_LEN_LOW
+                            + (pos_state <<
+                               LZMA_LEN_NUM_LOW_BITS));
+                offset = 0;
+                num_bits = LZMA_LEN_NUM_LOW_BITS;
+        } else {
+                rc_update_bit_1(rc, prob_len);
+                prob_len = prob + LZMA_LEN_CHOICE_2;
+                if (rc_is_bit_0(rc, prob_len)) {
+                        rc_update_bit_0(rc, prob_len);
+                        prob_len = (prob + LZMA_LEN_MID
+                                    + (pos_state <<
+                                       LZMA_LEN_NUM_MID_BITS));
+                        offset = 1 << LZMA_LEN_NUM_LOW_BITS;
+                        num_bits = LZMA_LEN_NUM_MID_BITS;
+                } else {
+                        rc_update_bit_1(rc, prob_len);
+                        prob_len = prob + LZMA_LEN_HIGH;
+                        offset = ((1 << LZMA_LEN_NUM_LOW_BITS)
+                                  + (1 << LZMA_LEN_NUM_MID_BITS));
+                        num_bits = LZMA_LEN_NUM_HIGH_BITS;
+                }
+        }
+
+        rc_bit_tree_decode(rc, prob_len, num_bits, &len);
+        len += offset;
+
+        if (cst->state < 4) {
+                int pos_slot;
+
+                cst->state += LZMA_NUM_LIT_STATES;
+                prob =
+                        p + LZMA_POS_SLOT +
+                        ((len <
+                          LZMA_NUM_LEN_TO_POS_STATES ? len :
+                          LZMA_NUM_LEN_TO_POS_STATES - 1)
+                         << LZMA_NUM_POS_SLOT_BITS);
+                rc_bit_tree_decode(rc, prob,
+                                   LZMA_NUM_POS_SLOT_BITS,
+                                   &pos_slot);
+                if (pos_slot >= LZMA_START_POS_MODEL_INDEX) {
+                        int i, mi;
+                        num_bits = (pos_slot >> 1) - 1;
+                        cst->rep0 = 2 | (pos_slot & 1);
+                        if (pos_slot < LZMA_END_POS_MODEL_INDEX) {
+                                cst->rep0 <<= num_bits;
+                                prob = p + LZMA_SPEC_POS +
+                                        cst->rep0 - pos_slot - 1;
+                        } else {
+                                num_bits -= LZMA_NUM_ALIGN_BITS;
+                                while (num_bits--)
+                                        cst->rep0 = (cst->rep0 << 1) |
+                                                rc_direct_bit(rc);
+                                prob = p + LZMA_ALIGN;
+                                cst->rep0 <<= LZMA_NUM_ALIGN_BITS;
+                                num_bits = LZMA_NUM_ALIGN_BITS;
+                        }
+                        i = 1;
+                        mi = 1;
+                        while (num_bits--) {
+                                if (rc_get_bit(rc, prob + mi, &mi))
+                                        cst->rep0 |= i;
+                                i <<= 1;
+                        }
+                } else
+                        cst->rep0 = pos_slot;
+                if (++(cst->rep0) == 0)
+                        return;
+        }
+
+        len += LZMA_MATCH_MIN_LEN;
+
+        copy_bytes(wr, cst->rep0, len);
+}
+
+
+
+STATIC inline int INIT unlzma(unsigned char *buf, int in_len,
+                              int(*fill)(void*, unsigned int),
+                              int(*flush)(void*, unsigned int),
+                              unsigned char *output,
+                              int *posp,
+                              void(*error_fn)(char *x)
+        )
+{
+        struct lzma_header header;
+        int lc, pb, lp;
+        uint32_t pos_state_mask;
+        uint32_t literal_pos_mask;
+        uint16_t *p;
+        int num_probs;
+        struct rc rc;
+        int i, mi;
+        struct writer wr;
+        struct cstate cst;
+        unsigned char *inbuf;
+        int ret = -1;
+
+        set_error_fn(error_fn);
+        if (!flush)
+                in_len -= 4; /* Uncompressed size hack active in pre-boot
+                                environment */
+        if (buf)
+                inbuf = buf;
+        else
+                inbuf = malloc(LZMA_IOBUF_SIZE);
+        if (!inbuf) {
+                error("Could not allocate input bufer");
+                goto exit_0;
+        }
+
+        cst.state = 0;
+        cst.rep0 = cst.rep1 = cst.rep2 = cst.rep3 = 1;
+
+        wr.header = &header;
+        wr.flush = flush;
+        wr.global_pos = 0;
+        wr.previous_byte = 0;
+        wr.buffer_pos = 0;
+
+        rc_init(&rc, fill, inbuf, in_len);
+
+        for (i = 0; i < sizeof(header); i++) {
+                if (rc.ptr >= rc.buffer_end)
+                        rc_read(&rc);
+                ((unsigned char *)&header)[i] = *rc.ptr++;
+        }
+
+        if (header.pos >= (9 * 5 * 5))
+                error("bad header");
+
+        mi = 0;
+        lc = header.pos;
+        while (lc >= 9) {
+                mi++;
+                lc -= 9;
+        }
+        pb = 0;
+        lp = mi;
+        while (lp >= 5) {
+                pb++;
+                lp -= 5;
+        }
+        pos_state_mask = (1 << pb) - 1;
+        literal_pos_mask = (1 << lp) - 1;
+
+        ENDIAN_CONVERT(header.dict_size);
+        ENDIAN_CONVERT(header.dst_size);
+
+        if (header.dict_size == 0)
+                header.dict_size = 1;
+
+        if (output)
+                wr.buffer = output;
+        else {
+                wr.bufsize = MIN(header.dst_size, header.dict_size);
+                wr.buffer = large_malloc(wr.bufsize);
+        }
+        if (wr.buffer == NULL)
+                goto exit_1;
+
+        num_probs = LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp));
+        p = (uint16_t *) large_malloc(num_probs * sizeof(*p));
+        if (p == 0)
+                goto exit_2;
+        num_probs = LZMA_LITERAL + (LZMA_LIT_SIZE << (lc + lp));
+        for (i = 0; i < num_probs; i++)
+                p[i] = (1 << RC_MODEL_TOTAL_BITS) >> 1;
+
+        rc_init_code(&rc);
+
+        while (get_pos(&wr) < header.dst_size) {
+                int pos_state = get_pos(&wr) & pos_state_mask;
+                uint16_t *prob = p + LZMA_IS_MATCH +
+                        (cst.state << LZMA_NUM_POS_BITS_MAX) + pos_state;
+                if (rc_is_bit_0(&rc, prob))
+                        process_bit0(&wr, &rc, &cst, p, pos_state, prob,
+                                     lc, literal_pos_mask);
+                else {
+                        process_bit1(&wr, &rc, &cst, p, pos_state, prob);
+                        if (cst.rep0 == 0)
+                                break;
+                }
+        }
+
+        if (posp)
+                *posp = rc.ptr-rc.buffer;
+        if (wr.flush)
+                wr.flush(wr.buffer, wr.buffer_pos);
+        ret = 0;
+        large_free(p);
+exit_2:
+        if (!output)
+                large_free(wr.buffer);
+exit_1:
+        if (!buf)
+                free(inbuf);
+exit_0:
+        return ret;
+}
+
+#define decompress unlzma
diff --git a/lib/zlib_inflate/inflate.h b/lib/zlib_inflate/inflate.h
index df8a6c92052..3d17b3d1b21 100644
--- a/lib/zlib_inflate/inflate.h
+++ b/lib/zlib_inflate/inflate.h
@@ -1,3 +1,6 @@
+#ifndef INFLATE_H
+#define INFLATE_H
+
 /* inflate.h -- internal inflate state definition
  * Copyright (C) 1995-2004 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
@@ -105,3 +108,4 @@ struct inflate_state {
     unsigned short work[288];   /* work area for code table building */
     code codes[ENOUGH];         /* space for code tables */
 };
+#endif
diff --git a/lib/zlib_inflate/inftrees.h b/lib/zlib_inflate/inftrees.h
index 5f5219b1240..b70b4731ac7 100644
--- a/lib/zlib_inflate/inftrees.h
+++ b/lib/zlib_inflate/inftrees.h
@@ -1,3 +1,6 @@
+#ifndef INFTREES_H
+#define INFTREES_H
+
 /* inftrees.h -- header to use inftrees.c
  * Copyright (C) 1995-2005 Mark Adler
  * For conditions of distribution and use, see copyright notice in zlib.h
@@ -53,3 +56,4 @@ typedef enum {
 extern int zlib_inflate_table (codetype type, unsigned short *lens,
                              unsigned codes, code **table,
                              unsigned *bits, unsigned short *work);
+#endif