[ARM] 3960/1: AT91: Final SAM9 intergration patches.

This patch includes a number of small changes for integrating the
AT91SAM9261 and AT91SAM0260 support.

      * Can only select support for one AT91 processor at a time.
      * Remove most of the remaining static memory mapping for the
        AT91RM9200.
      * Reserve 1Mb of memory below the IO for mapping the internal SRAM
        and any custom board-specific devices (ie, FPGA).
      * The SAM9260 has more serial ports, so increase the maximum to 7.
      * Define the standard chipselect addresses, and define other
        addresses relative to those.
      * CLOCK_TICK_RATE is different on the SAM926x's.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 24 insertions, 17 deletions

diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h
index d42e310584a..9ea5bfe0632 100644
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ b/include/asm-arm/arch-at91rm9200/hardware.h
@@ -42,29 +42,27 @@
  * Virtual to Physical Address mapping for IO devices.
  */
 #define AT91_VA_BASE_SYS        AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_SPI        AT91_IO_P2V(AT91RM9200_BASE_SPI)
 #define AT91_VA_BASE_EMAC       AT91_IO_P2V(AT91RM9200_BASE_EMAC)
-#define AT91_VA_BASE_TWI        AT91_IO_P2V(AT91RM9200_BASE_TWI)
-#define AT91_VA_BASE_MCI        AT91_IO_P2V(AT91RM9200_BASE_MCI)
-#define AT91_VA_BASE_UDP        AT91_IO_P2V(AT91RM9200_BASE_UDP)
 
  /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_VIRT_BASE     (AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE)
+#define AT91_SRAM_MAX           SZ_1M
+#define AT91_VIRT_BASE          (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
 
 /* Serial ports */
-#define ATMEL_MAX_UART          5               /* 4 USART3's and one DBGU port */
-
-/* FLASH */
-#define AT91_FLASH_BASE         0x10000000      /* NCS0: Flash physical base address */
+#define ATMEL_MAX_UART          7               /* 6 USART3's and one DBGU port (SAM9260) */
+
+/* External Memory Map */
+#define AT91_CHIPSELECT_0       0x10000000
+#define AT91_CHIPSELECT_1       0x20000000
+#define AT91_CHIPSELECT_2       0x30000000
+#define AT91_CHIPSELECT_3       0x40000000
+#define AT91_CHIPSELECT_4       0x50000000
+#define AT91_CHIPSELECT_5       0x60000000
+#define AT91_CHIPSELECT_6       0x70000000
+#define AT91_CHIPSELECT_7       0x80000000
 
 /* SDRAM */
-#define AT91_SDRAM_BASE         0x20000000      /* NCS1: SDRAM physical base address */
-
-/* SmartMedia */
-#define AT91_SMARTMEDIA_BASE    0x40000000      /* NCS3: Smartmedia physical base address */
-
-/* Compact Flash */
-#define AT91_CF_BASE            0x50000000      /* NCS4-NCS6: Compact Flash physical base address */
+#define AT91_SDRAM_BASE         AT91_CHIPSELECT_1
 
 /* Clocks */
 #define AT91_SLOW_CLOCK         32768           /* slow clock */
diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91rm9200/timex.h
index 88687cefe6e..faeca45a8d4 100644
--- a/include/asm-arm/arch-at91rm9200/timex.h
+++ b/include/asm-arm/arch-at91rm9200/timex.h
@@ -23,6 +23,15 @@
 
 #include <asm/hardware.h>
 
+#if defined(CONFIG_ARCH_AT91RM9200)
+
 #define CLOCK_TICK_RATE         (AT91_SLOW_CLOCK)
 
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
+
+#define AT91SAM9_MASTER_CLOCK   99300000
+#define CLOCK_TICK_RATE         (AT91SAM9_MASTER_CLOCK/16)
+
+#endif
+
 #endif
diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91rm9200/vmalloc.h
index 4c367eb57f4..0a23b8c562b 100644
--- a/include/asm-arm/arch-at91rm9200/vmalloc.h
+++ b/include/asm-arm/arch-at91rm9200/vmalloc.h
@@ -21,6 +21,6 @@
 #ifndef __ASM_ARCH_VMALLOC_H
 #define __ASM_ARCH_VMALLOC_H
 
-#define VMALLOC_END             (AT91_SRAM_VIRT_BASE & PGDIR_MASK)
+#define VMALLOC_END             (AT91_VIRT_BASE & PGDIR_MASK)
 
 #endif