diff options
author | Wolfram Sang <w.sang@pengutronix.de> | 2010-04-29 04:03:17 -0400 |
---|---|---|
committer | Wim Van Sebroeck <wim@iguana.be> | 2010-05-25 08:43:46 -0400 |
commit | bb2fd8a844d3a9209599b5fb694b30ac46a56ef0 (patch) | |
tree | 865ffef13864e8f88974f0d79b7feb447db7b7b6 /drivers | |
parent | 100fb76f0acfebcb7c72875890b9ef33ff04dc2b (diff) |
watchdog: Driver for the watchdog timer on Freescale IMX2 (and later) processors.
This is the driver for the hardware watchdog on the Freescale IMX2 and later processors.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Vladimir Zapolskiy <vzapolskiy@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/watchdog/Kconfig | 12 | ||||
-rw-r--r-- | drivers/watchdog/Makefile | 1 | ||||
-rw-r--r-- | drivers/watchdog/imx2_wdt.c | 358 |
3 files changed, 371 insertions, 0 deletions
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index c57ecffe008..afcfacc9bbe 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig | |||
@@ -312,6 +312,18 @@ config MAX63XX_WATCHDOG | |||
312 | help | 312 | help |
313 | Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. | 313 | Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. |
314 | 314 | ||
315 | config IMX2_WDT | ||
316 | tristate "IMX2+ Watchdog" | ||
317 | depends on ARCH_MX2 || ARCH_MX25 || ARCH_MX3 || ARCH_MX5 | ||
318 | help | ||
319 | This is the driver for the hardware watchdog | ||
320 | on the Freescale IMX2 and later processors. | ||
321 | If you have one of these processors and wish to have | ||
322 | watchdog support enabled, say Y, otherwise say N. | ||
323 | |||
324 | To compile this driver as a module, choose M here: the | ||
325 | module will be called imx2_wdt. | ||
326 | |||
315 | # AVR32 Architecture | 327 | # AVR32 Architecture |
316 | 328 | ||
317 | config AT32AP700X_WDT | 329 | config AT32AP700X_WDT |
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 5e3cb95bb0e..72f3e2073f8 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile | |||
@@ -47,6 +47,7 @@ obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o | |||
47 | obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o | 47 | obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o |
48 | obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o | 48 | obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o |
49 | obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o | 49 | obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o |
50 | obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o | ||
50 | 51 | ||
51 | # AVR32 Architecture | 52 | # AVR32 Architecture |
52 | obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o | 53 | obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o |
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c new file mode 100644 index 00000000000..ea25885781b --- /dev/null +++ b/drivers/watchdog/imx2_wdt.c | |||
@@ -0,0 +1,358 @@ | |||
1 | /* | ||
2 | * Watchdog driver for IMX2 and later processors | ||
3 | * | ||
4 | * Copyright (C) 2010 Wolfram Sang, Pengutronix e.K. <w.sang@pengutronix.de> | ||
5 | * | ||
6 | * some parts adapted by similar drivers from Darius Augulis and Vladimir | ||
7 | * Zapolskiy, additional improvements by Wim Van Sebroeck. | ||
8 | * | ||
9 | * This program is free software; you can redistribute it and/or modify it | ||
10 | * under the terms of the GNU General Public License version 2 as published by | ||
11 | * the Free Software Foundation. | ||
12 | * | ||
13 | * NOTE: MX1 has a slightly different Watchdog than MX2 and later: | ||
14 | * | ||
15 | * MX1: MX2+: | ||
16 | * ---- ----- | ||
17 | * Registers: 32-bit 16-bit | ||
18 | * Stopable timer: Yes No | ||
19 | * Need to enable clk: No Yes | ||
20 | * Halt on suspend: Manual Can be automatic | ||
21 | */ | ||
22 | |||
23 | #include <linux/init.h> | ||
24 | #include <linux/kernel.h> | ||
25 | #include <linux/miscdevice.h> | ||
26 | #include <linux/module.h> | ||
27 | #include <linux/moduleparam.h> | ||
28 | #include <linux/platform_device.h> | ||
29 | #include <linux/watchdog.h> | ||
30 | #include <linux/clk.h> | ||
31 | #include <linux/fs.h> | ||
32 | #include <linux/io.h> | ||
33 | #include <linux/uaccess.h> | ||
34 | #include <linux/timer.h> | ||
35 | #include <linux/jiffies.h> | ||
36 | #include <mach/hardware.h> | ||
37 | |||
38 | #define DRIVER_NAME "imx2-wdt" | ||
39 | |||
40 | #define IMX2_WDT_WCR 0x00 /* Control Register */ | ||
41 | #define IMX2_WDT_WCR_WT (0xFF << 8) /* -> Watchdog Timeout Field */ | ||
42 | #define IMX2_WDT_WCR_WRE (1 << 3) /* -> WDOG Reset Enable */ | ||
43 | #define IMX2_WDT_WCR_WDE (1 << 2) /* -> Watchdog Enable */ | ||
44 | |||
45 | #define IMX2_WDT_WSR 0x02 /* Service Register */ | ||
46 | #define IMX2_WDT_SEQ1 0x5555 /* -> service sequence 1 */ | ||
47 | #define IMX2_WDT_SEQ2 0xAAAA /* -> service sequence 2 */ | ||
48 | |||
49 | #define IMX2_WDT_MAX_TIME 128 | ||
50 | #define IMX2_WDT_DEFAULT_TIME 60 /* in seconds */ | ||
51 | |||
52 | #define WDOG_SEC_TO_COUNT(s) ((s * 2 - 1) << 8) | ||
53 | |||
54 | #define IMX2_WDT_STATUS_OPEN 0 | ||
55 | #define IMX2_WDT_STATUS_STARTED 1 | ||
56 | #define IMX2_WDT_EXPECT_CLOSE 2 | ||
57 | |||
58 | static struct { | ||
59 | struct clk *clk; | ||
60 | void __iomem *base; | ||
61 | unsigned timeout; | ||
62 | unsigned long status; | ||
63 | struct timer_list timer; /* Pings the watchdog when closed */ | ||
64 | } imx2_wdt; | ||
65 | |||
66 | static struct miscdevice imx2_wdt_miscdev; | ||
67 | |||
68 | static int nowayout = WATCHDOG_NOWAYOUT; | ||
69 | module_param(nowayout, int, 0); | ||
70 | MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" | ||
71 | __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); | ||
72 | |||
73 | |||
74 | static unsigned timeout = IMX2_WDT_DEFAULT_TIME; | ||
75 | module_param(timeout, uint, 0); | ||
76 | MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds (default=" | ||
77 | __MODULE_STRING(IMX2_WDT_DEFAULT_TIME) ")"); | ||
78 | |||
79 | static const struct watchdog_info imx2_wdt_info = { | ||
80 | .identity = "imx2+ watchdog", | ||
81 | .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, | ||
82 | }; | ||
83 | |||
84 | static inline void imx2_wdt_setup(void) | ||
85 | { | ||
86 | u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR); | ||
87 | |||
88 | /* Strip the old watchdog Time-Out value */ | ||
89 | val &= ~IMX2_WDT_WCR_WT; | ||
90 | /* Generate reset if WDOG times out */ | ||
91 | val &= ~IMX2_WDT_WCR_WRE; | ||
92 | /* Keep Watchdog Disabled */ | ||
93 | val &= ~IMX2_WDT_WCR_WDE; | ||
94 | /* Set the watchdog's Time-Out value */ | ||
95 | val |= WDOG_SEC_TO_COUNT(imx2_wdt.timeout); | ||
96 | |||
97 | __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR); | ||
98 | |||
99 | /* enable the watchdog */ | ||
100 | val |= IMX2_WDT_WCR_WDE; | ||
101 | __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR); | ||
102 | } | ||
103 | |||
104 | static inline void imx2_wdt_ping(void) | ||
105 | { | ||
106 | __raw_writew(IMX2_WDT_SEQ1, imx2_wdt.base + IMX2_WDT_WSR); | ||
107 | __raw_writew(IMX2_WDT_SEQ2, imx2_wdt.base + IMX2_WDT_WSR); | ||
108 | } | ||
109 | |||
110 | static void imx2_wdt_timer_ping(unsigned long arg) | ||
111 | { | ||
112 | /* ping it every imx2_wdt.timeout / 2 seconds to prevent reboot */ | ||
113 | imx2_wdt_ping(); | ||
114 | mod_timer(&imx2_wdt.timer, jiffies + imx2_wdt.timeout * HZ / 2); | ||
115 | } | ||
116 | |||
117 | static void imx2_wdt_start(void) | ||
118 | { | ||
119 | if (!test_and_set_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) { | ||
120 | /* at our first start we enable clock and do initialisations */ | ||
121 | clk_enable(imx2_wdt.clk); | ||
122 | |||
123 | imx2_wdt_setup(); | ||
124 | } else /* delete the timer that pings the watchdog after close */ | ||
125 | del_timer_sync(&imx2_wdt.timer); | ||
126 | |||
127 | /* Watchdog is enabled - time to reload the timeout value */ | ||
128 | imx2_wdt_ping(); | ||
129 | } | ||
130 | |||
131 | static void imx2_wdt_stop(void) | ||
132 | { | ||
133 | /* we don't need a clk_disable, it cannot be disabled once started. | ||
134 | * We use a timer to ping the watchdog while /dev/watchdog is closed */ | ||
135 | imx2_wdt_timer_ping(0); | ||
136 | } | ||
137 | |||
138 | static void imx2_wdt_set_timeout(int new_timeout) | ||
139 | { | ||
140 | u16 val = __raw_readw(imx2_wdt.base + IMX2_WDT_WCR); | ||
141 | |||
142 | /* set the new timeout value in the WSR */ | ||
143 | val &= ~IMX2_WDT_WCR_WT; | ||
144 | val |= WDOG_SEC_TO_COUNT(new_timeout); | ||
145 | __raw_writew(val, imx2_wdt.base + IMX2_WDT_WCR); | ||
146 | } | ||
147 | |||
148 | static int imx2_wdt_open(struct inode *inode, struct file *file) | ||
149 | { | ||
150 | if (test_and_set_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status)) | ||
151 | return -EBUSY; | ||
152 | |||
153 | imx2_wdt_start(); | ||
154 | return nonseekable_open(inode, file); | ||
155 | } | ||
156 | |||
157 | static int imx2_wdt_close(struct inode *inode, struct file *file) | ||
158 | { | ||
159 | if (test_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status) && !nowayout) | ||
160 | imx2_wdt_stop(); | ||
161 | else { | ||
162 | dev_crit(imx2_wdt_miscdev.parent, | ||
163 | "Unexpected close: Expect reboot!\n"); | ||
164 | imx2_wdt_ping(); | ||
165 | } | ||
166 | |||
167 | clear_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status); | ||
168 | clear_bit(IMX2_WDT_STATUS_OPEN, &imx2_wdt.status); | ||
169 | return 0; | ||
170 | } | ||
171 | |||
172 | static long imx2_wdt_ioctl(struct file *file, unsigned int cmd, | ||
173 | unsigned long arg) | ||
174 | { | ||
175 | void __user *argp = (void __user *)arg; | ||
176 | int __user *p = argp; | ||
177 | int new_value; | ||
178 | |||
179 | switch (cmd) { | ||
180 | case WDIOC_GETSUPPORT: | ||
181 | return copy_to_user(argp, &imx2_wdt_info, | ||
182 | sizeof(struct watchdog_info)) ? -EFAULT : 0; | ||
183 | |||
184 | case WDIOC_GETSTATUS: | ||
185 | case WDIOC_GETBOOTSTATUS: | ||
186 | return put_user(0, p); | ||
187 | |||
188 | case WDIOC_KEEPALIVE: | ||
189 | imx2_wdt_ping(); | ||
190 | return 0; | ||
191 | |||
192 | case WDIOC_SETTIMEOUT: | ||
193 | if (get_user(new_value, p)) | ||
194 | return -EFAULT; | ||
195 | if ((new_value < 1) || (new_value > IMX2_WDT_MAX_TIME)) | ||
196 | return -EINVAL; | ||
197 | imx2_wdt_set_timeout(new_value); | ||
198 | imx2_wdt.timeout = new_value; | ||
199 | imx2_wdt_ping(); | ||
200 | |||
201 | /* Fallthrough to return current value */ | ||
202 | case WDIOC_GETTIMEOUT: | ||
203 | return put_user(imx2_wdt.timeout, p); | ||
204 | |||
205 | default: | ||
206 | return -ENOTTY; | ||
207 | } | ||
208 | } | ||
209 | |||
210 | static ssize_t imx2_wdt_write(struct file *file, const char __user *data, | ||
211 | size_t len, loff_t *ppos) | ||
212 | { | ||
213 | size_t i; | ||
214 | char c; | ||
215 | |||
216 | if (len == 0) /* Can we see this even ? */ | ||
217 | return 0; | ||
218 | |||
219 | clear_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status); | ||
220 | /* scan to see whether or not we got the magic character */ | ||
221 | for (i = 0; i != len; i++) { | ||
222 | if (get_user(c, data + i)) | ||
223 | return -EFAULT; | ||
224 | if (c == 'V') | ||
225 | set_bit(IMX2_WDT_EXPECT_CLOSE, &imx2_wdt.status); | ||
226 | } | ||
227 | |||
228 | imx2_wdt_ping(); | ||
229 | return len; | ||
230 | } | ||
231 | |||
232 | static const struct file_operations imx2_wdt_fops = { | ||
233 | .owner = THIS_MODULE, | ||
234 | .llseek = no_llseek, | ||
235 | .unlocked_ioctl = imx2_wdt_ioctl, | ||
236 | .open = imx2_wdt_open, | ||
237 | .release = imx2_wdt_close, | ||
238 | .write = imx2_wdt_write, | ||
239 | }; | ||
240 | |||
241 | static struct miscdevice imx2_wdt_miscdev = { | ||
242 | .minor = WATCHDOG_MINOR, | ||
243 | .name = "watchdog", | ||
244 | .fops = &imx2_wdt_fops, | ||
245 | }; | ||
246 | |||
247 | static int __init imx2_wdt_probe(struct platform_device *pdev) | ||
248 | { | ||
249 | int ret; | ||
250 | int res_size; | ||
251 | struct resource *res; | ||
252 | |||
253 | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | ||
254 | if (!res) { | ||
255 | dev_err(&pdev->dev, "can't get device resources\n"); | ||
256 | return -ENODEV; | ||
257 | } | ||
258 | |||
259 | res_size = resource_size(res); | ||
260 | if (!devm_request_mem_region(&pdev->dev, res->start, res_size, | ||
261 | res->name)) { | ||
262 | dev_err(&pdev->dev, "can't allocate %d bytes at %d address\n", | ||
263 | res_size, res->start); | ||
264 | return -ENOMEM; | ||
265 | } | ||
266 | |||
267 | imx2_wdt.base = devm_ioremap_nocache(&pdev->dev, res->start, res_size); | ||
268 | if (!imx2_wdt.base) { | ||
269 | dev_err(&pdev->dev, "ioremap failed\n"); | ||
270 | return -ENOMEM; | ||
271 | } | ||
272 | |||
273 | imx2_wdt.clk = clk_get_sys("imx-wdt.0", NULL); | ||
274 | if (IS_ERR(imx2_wdt.clk)) { | ||
275 | dev_err(&pdev->dev, "can't get Watchdog clock\n"); | ||
276 | return PTR_ERR(imx2_wdt.clk); | ||
277 | } | ||
278 | |||
279 | imx2_wdt.timeout = clamp_t(unsigned, timeout, 1, IMX2_WDT_MAX_TIME); | ||
280 | if (imx2_wdt.timeout != timeout) | ||
281 | dev_warn(&pdev->dev, "Initial timeout out of range! " | ||
282 | "Clamped from %u to %u\n", timeout, imx2_wdt.timeout); | ||
283 | |||
284 | setup_timer(&imx2_wdt.timer, imx2_wdt_timer_ping, 0); | ||
285 | |||
286 | imx2_wdt_miscdev.parent = &pdev->dev; | ||
287 | ret = misc_register(&imx2_wdt_miscdev); | ||
288 | if (ret) | ||
289 | goto fail; | ||
290 | |||
291 | dev_info(&pdev->dev, | ||
292 | "IMX2+ Watchdog Timer enabled. timeout=%ds (nowayout=%d)\n", | ||
293 | imx2_wdt.timeout, nowayout); | ||
294 | return 0; | ||
295 | |||
296 | fail: | ||
297 | imx2_wdt_miscdev.parent = NULL; | ||
298 | clk_put(imx2_wdt.clk); | ||
299 | return ret; | ||
300 | } | ||
301 | |||
302 | static int __exit imx2_wdt_remove(struct platform_device *pdev) | ||
303 | { | ||
304 | misc_deregister(&imx2_wdt_miscdev); | ||
305 | |||
306 | if (test_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) { | ||
307 | del_timer_sync(&imx2_wdt.timer); | ||
308 | |||
309 | dev_crit(imx2_wdt_miscdev.parent, | ||
310 | "Device removed: Expect reboot!\n"); | ||
311 | } else | ||
312 | clk_put(imx2_wdt.clk); | ||
313 | |||
314 | imx2_wdt_miscdev.parent = NULL; | ||
315 | return 0; | ||
316 | } | ||
317 | |||
318 | static void imx2_wdt_shutdown(struct platform_device *pdev) | ||
319 | { | ||
320 | if (test_bit(IMX2_WDT_STATUS_STARTED, &imx2_wdt.status)) { | ||
321 | /* we are running, we need to delete the timer but will give | ||
322 | * max timeout before reboot will take place */ | ||
323 | del_timer_sync(&imx2_wdt.timer); | ||
324 | imx2_wdt_set_timeout(IMX2_WDT_MAX_TIME); | ||
325 | imx2_wdt_ping(); | ||
326 | |||
327 | dev_crit(imx2_wdt_miscdev.parent, | ||
328 | "Device shutdown: Expect reboot!\n"); | ||
329 | } | ||
330 | } | ||
331 | |||
332 | static struct platform_driver imx2_wdt_driver = { | ||
333 | .probe = imx2_wdt_probe, | ||
334 | .remove = __exit_p(imx2_wdt_remove), | ||
335 | .shutdown = imx2_wdt_shutdown, | ||
336 | .driver = { | ||
337 | .name = DRIVER_NAME, | ||
338 | .owner = THIS_MODULE, | ||
339 | }, | ||
340 | }; | ||
341 | |||
342 | static int __init imx2_wdt_init(void) | ||
343 | { | ||
344 | return platform_driver_probe(&imx2_wdt_driver, imx2_wdt_probe); | ||
345 | } | ||
346 | module_init(imx2_wdt_init); | ||
347 | |||
348 | static void __exit imx2_wdt_exit(void) | ||
349 | { | ||
350 | platform_driver_unregister(&imx2_wdt_driver); | ||
351 | } | ||
352 | module_exit(imx2_wdt_exit); | ||
353 | |||
354 | MODULE_AUTHOR("Wolfram Sang"); | ||
355 | MODULE_DESCRIPTION("Watchdog driver for IMX2 and later"); | ||
356 | MODULE_LICENSE("GPL v2"); | ||
357 | MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); | ||
358 | MODULE_ALIAS("platform:" DRIVER_NAME); | ||