ide: mode limiting fixes for user requested speed changes

* Add an extra argument to ide_max_dma_mode() for passing requested transfer
  mode.  Use it as an upper limit when finding the best DMA for device/host.

* Rename ide_max_dma_mode() to ide_find_dma_mode() and at the same time add
  ide_max_dma_mode() wrapper which passes XFER_UDMA_6 as a requested mode to
  ide_find_dma_mode().  Also add inline ide_find_dma_mode() version for
  CONFIG_BLK_DEV_IDEDMA=n case.

* Pass requested transfer mode from ide_find_dma_mode() to ide_get_mode_mask()
  to avoid false warning from eighty_ninty_three().

* Use ide_find_dma_mode() to limit the user requested transfer mode in
  ide_rate_filter().  Also limit the requested mode by host max PIO mode.


Above changes make ide_rate_filter() to:

* Clip desired transfer mode down if it is invalid (values 0x0F, 0x13-0x19
  and 0x25-0x39, values > 0x46 were already clipped down, same for values
  0x25-0x39 but iff UDMA was not supported by the host).

* Clip desired transfer mode down if it is currently unsupported by IDE core
  (PIO6 and MWDMA3-4, the latter were already clipped down but iff UDMA was
  not supported by the host).

* Clip desired transfer mode down according to the host capabilities
  (UDMA modes were already clipped down but MWDMA/SWDMA/PIO weren't,
  also ->atapi_dma flag was not respected).

* Clip desired transfer mode down according to the device capabilities
  (except PIO modes for now which require mode work) - shouldn't be a
  problem since ide_set_xfer_rate() is called _after_ device has accepted
  given transfer mode.

and also result in a number of host driver specific bugfixes:

* icside
  - clip unsupported PIO5 mode down
  - fix unsupported/invalid modes being set in drive->current_speed

* ide-cris
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - clip DMA modes down for ATAPI devices
  - fix BUG() on unsupported/invalid modes

* au1xxx-ide
  - clip unsupported PIO5, SWDMA0-2 and MWDMA0-2
    (if BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=n) modes down

* aec62xx
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - clip DMA modes down for ATAPI devices
  - fix 0x00 being programmed as PIO timing for unsupported/invalid modes
  - fix unsupported/invalid modes being set on the device

* alim15x3
  - clip DMA modes down for ATAPI devices (chipset revision == 0x20 only)
  - fix theoretical OOPS for 0x0F mode
  - fix unsupported/invalid modes being set on the device

* amd74xx
  - clip unsupported SWDMA0-2 (on COBRA_7401 revs <= 7) modes down
  - fix random PIO timings being set for unsupported/invalid modes
  - fix unsupported/invalid modes being set on the device

* atiixp
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - fix cached MWDMA mode being cleared for unsupported/invalid modes
  - fix PIO{0,2} timings being programmed for unsupported/invalid modes
  - fix theoretical OOPS for PIO5-6 and 0x0F modes
  - fix unsupported/invalid modes being set on the device

* cmd64x
  - clip unsupported SWDMA0-2 modes down

* cs5530
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - fix unsupported/invalid modes being set on the device
  - fix BUG() on unsupported/invalid modes
    (which happened if the device accepted the setting)

* cs5535
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - fix unsupported/invalid modes being set on the device
  - fix theoretical OOPS for PIO5-6 and 0x0F modes

* hpt34x
  - clip DMA modes down for ATAPI devices
  - fix invalid timings being programmed for unsupported/invalid modes
  - fix unsupported/invalid modes being set on the device

* hpt366
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - fix PIO0 timings being programmed for unsupported/invalid modes
  - fix DMA timings being cleared for MWDMA3-4 and 0x25-0x39 modes
  - fix unsupported/invalid modes being set on the device

* it8213
  - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down

* it821x
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - clip DMA modes down for ATAPI devices
    (chipset in smart mode and revision 0x10 in pass-through mode)

* jmicron
  - clip unsupported SWDMA0-2 modes down
  - fix unsupported/invalid modes being set on the device

* pdc202xx_new
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - fix unsupported/invalid modes being set on the device

* pdc202xx_old
  - clip unsupported PIO5 mode down
  - fix incorrect timings being set for unsupported/invalid modes
  - fix unsupported/invalid modes being set on the device

* piix
  - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down

* sc1200
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - fix unsupported/invalid modes being set on the device
  - fix BUG() on unsupported/invalid modes
    (which happened if the device accepted the setting)

* scc_pata
  - clip unsupported PIO5, SWDMA0-2 and MWDMA0-2 modes down

* serverworks
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - fix DMA/UDMA timings/settings being cleared for unsupported/invalid modes
  - fix unsupported/invalid modes being set on the device

* siimage
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - clip DMA modes down for ATAPI devices (SATA chipsets)

* sis5513
  - clip unsupported PIO5 mode down
  - fix BUG() on unsupported/invalid modes

* sl82c105
  - clip unsupported SWDMA0-2 modes down

* slc90e66
  - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down

* tc86c001
  - clip unsupported PIO5 and SWDMA0-2 modes down
  - fix PIO0 timings being programmed for PIO5/0x0F/SWDMA0-2/0x13-0x19 modes
  - fix invalid 0x00 DMA timing being programmed for MWDMA3-4/0x25-0x39 modes
  - fix unsupported/invalid modes being set on the device

* triflex
  - clip unsupported PIO5 mode down

* via82cxxx
  - fix random PIO timings being set for unsupported/invalid modes
  - fix unsupported/invalid modes being set on the device

* pmac
  - clip unsupported PIO5 and SWDMA0-2 modes down

* cmd640/ht6560b
  - clip DMA modes down (if CONFIG_BLK_DEV_IDEDMA=y)
  - fix PIO5 being clipped to PIO4 (if CONFIG_BLK_DEV_IDEDMA=n)

* opti621
  - clip DMA modes down (if CONFIG_BLK_DEV_IDEDMA=y)
  - clip unsupported PIO4 to PIO3 (if CONFIG_BLK_DEV_IDEDMA=n)


While at it:

* Use ide_rate_filter() in cs5520.c::cs5520_tune_chipset().

* Remove no longer needed checks from hpt366.c::hpt3{6,7}x_tune_chipset().

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

4 files changed, 30 insertions, 41 deletions

diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index f073ea35da0..6000c08f51b 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -653,7 +653,7 @@ static const u8 xfer_mode_bases[] = {
         XFER_SW_DMA_0,
 };
 
-static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base)
+static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode)
 {
         struct hd_driveid *id = drive->id;
         ide_hwif_t *hwif = drive->hwif;
@@ -670,8 +670,13 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base)
                         mask = hwif->ultra_mask;
                 mask &= id->dma_ultra;
 
-                if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
-                        mask &= 0x07;
+                /*
+                 * avoid false cable warning from eighty_ninty_three()
+                 */
+                if (req_mode > XFER_UDMA_2) {
+                        if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
+                                mask &= 0x07;
+                }
                 break;
         case XFER_MW_DMA_0:
                 if ((id->field_valid & 2) == 0)
@@ -709,15 +714,18 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base)
 }
 
 /**
- *      ide_max_dma_mode        -       compute DMA speed
+ *      ide_find_dma_mode       -       compute DMA speed
  *      @drive: IDE device
+ *      @req_mode: requested mode
+ *
+ *      Checks the drive/host capabilities and finds the speed to use for
+ *      the DMA transfer.  The speed is then limited by the requested mode.
  *
- *      Checks the drive capabilities and returns the speed to use
- *      for the DMA transfer.  Returns 0 if the drive is incapable
- *      of DMA transfers.
+ *      Returns 0 if the drive/host combination is incapable of DMA transfers
+ *      or if the requested mode is not a DMA mode.
  */
 
-u8 ide_max_dma_mode(ide_drive_t *drive)
+u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
 {
         ide_hwif_t *hwif = drive->hwif;
         unsigned int mask;
@@ -728,7 +736,9 @@ u8 ide_max_dma_mode(ide_drive_t *drive)
                 return 0;
 
         for (i = 0; i < ARRAY_SIZE(xfer_mode_bases); i++) {
-                mask = ide_get_mode_mask(drive, xfer_mode_bases[i]);
+                if (req_mode < xfer_mode_bases[i])
+                        continue;
+                mask = ide_get_mode_mask(drive, xfer_mode_bases[i], req_mode);
                 x = fls(mask) - 1;
                 if (x >= 0) {
                         mode = xfer_mode_bases[i] + x;
@@ -738,10 +748,10 @@ u8 ide_max_dma_mode(ide_drive_t *drive)
 
         printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode);
 
-        return mode;
+        return min(mode, req_mode);
 }
 
-EXPORT_SYMBOL_GPL(ide_max_dma_mode);
+EXPORT_SYMBOL_GPL(ide_find_dma_mode);
 
 int ide_tune_dma(ide_drive_t *drive)
 {
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 92a6c7bcf52..41a128f5211 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -76,37 +76,24 @@ EXPORT_SYMBOL(ide_xfer_verbose);
  *      Given the available transfer modes this function returns
  *      the best available speed at or below the speed requested.
  *
- *      FIXME: filter also PIO/SWDMA/MWDMA modes
+ *      TODO: check device PIO capabilities
  */
 
 u8 ide_rate_filter(ide_drive_t *drive, u8 speed)
 {
-#ifdef CONFIG_BLK_DEV_IDEDMA
         ide_hwif_t *hwif = drive->hwif;
-        u8 mask = hwif->ultra_mask, mode = XFER_MW_DMA_2;
-
-        if (hwif->udma_filter)
-                mask = hwif->udma_filter(drive);
-
-        /*
-         * TODO: speed > XFER_UDMA_2 extra check is needed to avoid false
-         * cable warning from eighty_ninty_three(), moving ide_rate_filter()
-         * calls from ->speedproc to core code will make this hack go away
-         */
-        if (speed > XFER_UDMA_2) {
-                if ((mask & 0x78) && (eighty_ninty_three(drive) == 0))
-                        mask &= 0x07;
-        }
+        u8 mode = ide_find_dma_mode(drive, speed);
 
-        if (mask)
-                mode = fls(mask) - 1 + XFER_UDMA_0;
+        if (mode == 0) {
+                if (hwif->pio_mask)
+                        mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0;
+                else
+                        mode = XFER_PIO_4;
+        }
 
 //      printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed);
 
         return min(speed, mode);
-#else /* !CONFIG_BLK_DEV_IDEDMA */
-        return min(speed, (u8)XFER_PIO_4);
-#endif /* CONFIG_BLK_DEV_IDEDMA */
 }
 
 EXPORT_SYMBOL(ide_rate_filter);
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index b89e8165687..507981042c8 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -70,7 +70,7 @@ static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed)
 {
         ide_hwif_t *hwif = HWIF(drive);
         struct pci_dev *pdev = hwif->pci_dev;
-        u8 speed = min((u8)XFER_PIO_4, xferspeed);
+        u8 speed = ide_rate_filter(drive, xferspeed);
         int pio = speed;
         u8 reg;
         int controller = drive->dn > 1 ? 1 : 0;
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 3d8d6b2ee41..18c8ad091eb 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -610,10 +610,6 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
         u32 old_itr             = 0;
         u32 itr_mask, new_itr;
 
-        /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */
-        if (drive->media != ide_disk)
-                speed = min_t(u8, speed, XFER_PIO_4);
-
         itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 :
                   (speed < XFER_UDMA_0   ? 0xc0070000 : 0xc03800ff);
 
@@ -642,10 +638,6 @@ static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
         u32 old_itr             = 0;
         u32 itr_mask, new_itr;
 
-        /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */
-        if (drive->media != ide_disk)
-                speed = min_t(u8, speed, XFER_PIO_4);
-
         itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 :
                   (speed < XFER_UDMA_0   ? 0xc03c0000 : 0xc1c001ff);