spi_mpc83xx: support for lsb-first transfers

This controller supports LSB-first transfers; let drivers use them.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 10 insertions, 5 deletions

diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index e2d8dbc15c8..18c475dd570 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -153,13 +153,16 @@ static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
                         len = len - 1;
 
                 /* mask out bits we are going to set */
-                regval &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH |
-                            SPMODE_LEN(0xF) | SPMODE_DIV16 | SPMODE_PM(0xF));
+                regval &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
+                                | SPMODE_LEN(0xF) | SPMODE_DIV16
+                                | SPMODE_PM(0xF) | SPMODE_REV);
 
                 if (spi->mode & SPI_CPHA)
                         regval |= SPMODE_CP_BEGIN_EDGECLK;
                 if (spi->mode & SPI_CPOL)
                         regval |= SPMODE_CI_INACTIVEHIGH;
+                if (!(spi->mode & SPI_LSB_FIRST))
+                        regval |= SPMODE_REV;
 
                 regval |= SPMODE_LEN(len);
 
@@ -248,9 +251,11 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 
         regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
 
-        /* Mask out bits_per_wordgth */
-        regval &= ~SPMODE_LEN(0xF);
+        /* mask out bits we are going to set */
+        regval &= ~(SPMODE_LEN(0xF) | SPMODE_REV);
         regval |= SPMODE_LEN(bits_per_word);
+        if (!(spi->mode & SPI_LSB_FIRST))
+                regval |= SPMODE_REV;
 
         /* Turn off SPI unit prior changing mode */
         mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
@@ -260,7 +265,7 @@ int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
 }
 
 /* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST)
 
 static int mpc83xx_spi_setup(struct spi_device *spi)
 {