[SCSI] lpfc 8.3.9: PCI Changes to lpfc driver

- Call pci_save_state() after pci_restore_state() call to cope
  with kernel change.
- Add support for PCI BAR region 0 if BAR0 is a 64 bit register.

Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

2 files changed, 32 insertions, 12 deletions

diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index c2bec6e6222..ae0c53dba84 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -77,10 +77,6 @@ struct lpfc_sli_intf {
 #define LPFC_SLI_INTF_VALID             6
 };
 
-#define LPFC_SLI4_BAR0          1
-#define LPFC_SLI4_BAR1          2
-#define LPFC_SLI4_BAR2          4
-
 #define LPFC_SLI4_MBX_EMBED     true
 #define LPFC_SLI4_MBX_NEMBED    false
 
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 52fc758b8f7..25a97dfd4ea 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -6079,16 +6079,20 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba)
 
         /* Get the bus address of SLI4 device Bar0, Bar1, and Bar2 and the
          * number of bytes required by each mapping. They are actually
-         * mapping to the PCI BAR regions 1, 2, and 4 by the SLI4 device.
+         * mapping to the PCI BAR regions 0 or 1, 2, and 4 by the SLI4 device.
          */
-        phba->pci_bar0_map = pci_resource_start(pdev, LPFC_SLI4_BAR0);
-        bar0map_len = pci_resource_len(pdev, LPFC_SLI4_BAR0);
-
-        phba->pci_bar1_map = pci_resource_start(pdev, LPFC_SLI4_BAR1);
-        bar1map_len = pci_resource_len(pdev, LPFC_SLI4_BAR1);
+        if (pci_resource_start(pdev, 0)) {
+                phba->pci_bar0_map = pci_resource_start(pdev, 0);
+                bar0map_len = pci_resource_len(pdev, 0);
+        } else {
+                phba->pci_bar0_map = pci_resource_start(pdev, 1);
+                bar0map_len = pci_resource_len(pdev, 1);
+        }
+        phba->pci_bar1_map = pci_resource_start(pdev, 2);
+        bar1map_len = pci_resource_len(pdev, 2);
 
-        phba->pci_bar2_map = pci_resource_start(pdev, LPFC_SLI4_BAR2);
-        bar2map_len = pci_resource_len(pdev, LPFC_SLI4_BAR2);
+        phba->pci_bar2_map = pci_resource_start(pdev, 4);
+        bar2map_len = pci_resource_len(pdev, 4);
 
         /* Map SLI4 PCI Config Space Register base to a kernel virtual addr */
         phba->sli4_hba.conf_regs_memmap_p =
@@ -7174,6 +7178,12 @@ lpfc_pci_resume_one_s3(struct pci_dev *pdev)
         pci_set_power_state(pdev, PCI_D0);
         pci_restore_state(pdev);
 
+        /*
+         * As the new kernel behavior of pci_restore_state() API call clears
+         * device saved_state flag, need to save the restored state again.
+         */
+        pci_save_state(pdev);
+
         if (pdev->is_busmaster)
                 pci_set_master(pdev);
 
@@ -7357,6 +7367,13 @@ lpfc_io_slot_reset_s3(struct pci_dev *pdev)
         }
 
         pci_restore_state(pdev);
+
+        /*
+         * As the new kernel behavior of pci_restore_state() API call clears
+         * device saved_state flag, need to save the restored state again.
+         */
+        pci_save_state(pdev);
+
         if (pdev->is_busmaster)
                 pci_set_master(pdev);
 
@@ -7766,6 +7783,13 @@ lpfc_pci_resume_one_s4(struct pci_dev *pdev)
         /* Restore device state from PCI config space */
         pci_set_power_state(pdev, PCI_D0);
         pci_restore_state(pdev);
+
+        /*
+         * As the new kernel behavior of pci_restore_state() API call clears
+         * device saved_state flag, need to save the restored state again.
+         */
+        pci_save_state(pdev);
+
         if (pdev->is_busmaster)
                 pci_set_master(pdev);