mv watchdog tree under drivers

move watchdog tree from drivers/char/watchdog to drivers/watchdog.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

1 files changed, 190 insertions, 0 deletions

diff --git a/drivers/watchdog/sa1100_wdt.c b/drivers/watchdog/sa1100_wdt.c
new file mode 100644
index 00000000000..3475f47aaa4
--- /dev/null
+++ b/drivers/watchdog/sa1100_wdt.c
@@ -0,0 +1,190 @@
+/*
+ *      Watchdog driver for the SA11x0/PXA2xx
+ *
+ *      (c) Copyright 2000 Oleg Drokin <green@crimea.edu>
+ *          Based on SoftDog driver by Alan Cox <alan@redhat.com>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ *
+ *      Neither Oleg Drokin nor iXcelerator.com admit liability nor provide
+ *      warranty for any of this software. This material is provided
+ *      "AS-IS" and at no charge.
+ *
+ *      (c) Copyright 2000           Oleg Drokin <green@crimea.edu>
+ *
+ *      27/11/2000 Initial release
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/init.h>
+
+#ifdef CONFIG_ARCH_PXA
+#include <asm/arch/pxa-regs.h>
+#endif
+
+#include <asm/hardware.h>
+#include <asm/bitops.h>
+#include <asm/uaccess.h>
+
+#define OSCR_FREQ               CLOCK_TICK_RATE
+
+static unsigned long sa1100wdt_users;
+static int pre_margin;
+static int boot_status;
+
+/*
+ *      Allow only one person to hold it open
+ */
+static int sa1100dog_open(struct inode *inode, struct file *file)
+{
+        if (test_and_set_bit(1,&sa1100wdt_users))
+                return -EBUSY;
+
+        /* Activate SA1100 Watchdog timer */
+        OSMR3 = OSCR + pre_margin;
+        OSSR = OSSR_M3;
+        OWER = OWER_WME;
+        OIER |= OIER_E3;
+        return nonseekable_open(inode, file);
+}
+
+/*
+ * The watchdog cannot be disabled.
+ *
+ * Previous comments suggested that turning off the interrupt by
+ * clearing OIER[E3] would prevent the watchdog timing out but this
+ * does not appear to be true (at least on the PXA255).
+ */
+static int sa1100dog_release(struct inode *inode, struct file *file)
+{
+        printk(KERN_CRIT "WATCHDOG: Device closed - timer will not stop\n");
+
+        clear_bit(1, &sa1100wdt_users);
+
+        return 0;
+}
+
+static ssize_t sa1100dog_write(struct file *file, const char __user *data, size_t len, loff_t *ppos)
+{
+        if (len)
+                /* Refresh OSMR3 timer. */
+                OSMR3 = OSCR + pre_margin;
+
+        return len;
+}
+
+static struct watchdog_info ident = {
+        .options        = WDIOF_CARDRESET | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+        .identity       = "SA1100/PXA255 Watchdog",
+};
+
+static int sa1100dog_ioctl(struct inode *inode, struct file *file,
+        unsigned int cmd, unsigned long arg)
+{
+        int ret = -ENOTTY;
+        int time;
+        void __user *argp = (void __user *)arg;
+        int __user *p = argp;
+
+        switch (cmd) {
+        case WDIOC_GETSUPPORT:
+                ret = copy_to_user(argp, &ident,
+                                   sizeof(ident)) ? -EFAULT : 0;
+                break;
+
+        case WDIOC_GETSTATUS:
+                ret = put_user(0, p);
+                break;
+
+        case WDIOC_GETBOOTSTATUS:
+                ret = put_user(boot_status, p);
+                break;
+
+        case WDIOC_SETTIMEOUT:
+                ret = get_user(time, p);
+                if (ret)
+                        break;
+
+                if (time <= 0 || time > 255) {
+                        ret = -EINVAL;
+                        break;
+                }
+
+                pre_margin = OSCR_FREQ * time;
+                OSMR3 = OSCR + pre_margin;
+                /*fall through*/
+
+        case WDIOC_GETTIMEOUT:
+                ret = put_user(pre_margin / OSCR_FREQ, p);
+                break;
+
+        case WDIOC_KEEPALIVE:
+                OSMR3 = OSCR + pre_margin;
+                ret = 0;
+                break;
+        }
+        return ret;
+}
+
+static const struct file_operations sa1100dog_fops =
+{
+        .owner          = THIS_MODULE,
+        .llseek         = no_llseek,
+        .write          = sa1100dog_write,
+        .ioctl          = sa1100dog_ioctl,
+        .open           = sa1100dog_open,
+        .release        = sa1100dog_release,
+};
+
+static struct miscdevice sa1100dog_miscdev =
+{
+        .minor          = WATCHDOG_MINOR,
+        .name           = "watchdog",
+        .fops           = &sa1100dog_fops,
+};
+
+static int margin __initdata = 60;              /* (secs) Default is 1 minute */
+
+static int __init sa1100dog_init(void)
+{
+        int ret;
+
+        /*
+         * Read the reset status, and save it for later.  If
+         * we suspend, RCSR will be cleared, and the watchdog
+         * reset reason will be lost.
+         */
+        boot_status = (RCSR & RCSR_WDR) ? WDIOF_CARDRESET : 0;
+        pre_margin = OSCR_FREQ * margin;
+
+        ret = misc_register(&sa1100dog_miscdev);
+        if (ret == 0)
+                printk("SA1100/PXA2xx Watchdog Timer: timer margin %d sec\n",
+                       margin);
+        return ret;
+}
+
+static void __exit sa1100dog_exit(void)
+{
+        misc_deregister(&sa1100dog_miscdev);
+}
+
+module_init(sa1100dog_init);
+module_exit(sa1100dog_exit);
+
+MODULE_AUTHOR("Oleg Drokin <green@crimea.edu>");
+MODULE_DESCRIPTION("SA1100/PXA2xx Watchdog");
+
+module_param(margin, int, 0);
+MODULE_PARM_DESC(margin, "Watchdog margin in seconds (default 60s)");
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);