Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Conflicts:

	drivers/infiniband/core/iwcm.c
	drivers/net/chelsio/cxgb2.c
	drivers/net/wireless/bcm43xx/bcm43xx_main.c
	drivers/net/wireless/prism54/islpci_eth.c
	drivers/usb/core/hub.h
	drivers/usb/input/hid-core.c
	net/core/netpoll.c

Fix up merge failures with Linus's head and fix new compilation failures.

Signed-Off-By: David Howells <dhowells@redhat.com>

83 files changed, 1078 insertions, 794 deletions

diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c
index 7ed34bb1c50..8ed6c75adf0 100644
--- a/drivers/usb/atm/speedtch.c
+++ b/drivers/usb/atm/speedtch.c
@@ -837,8 +837,8 @@ static int speedtch_bind(struct usbatm_data *usbatm,
                         const struct usb_endpoint_descriptor *endpoint_desc = &desc->endpoint[i].desc;
 
                         if ((endpoint_desc->bEndpointAddress == target_address)) {
-                                use_isoc = (endpoint_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-                                        USB_ENDPOINT_XFER_ISOC;
+                                use_isoc =
+                                        usb_endpoint_xfer_isoc(endpoint_desc);
                                 break;
                         }
                 }
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index e39bb09f5af..f2d196fa1e8 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -401,9 +401,8 @@ static int uea_send_modem_cmd(struct usb_device *usb,
         int ret = -ENOMEM;
         u8 *xfer_buff;
 
-        xfer_buff = kmalloc(size, GFP_KERNEL);
+        xfer_buff = kmemdup(buff, size, GFP_KERNEL);
         if (xfer_buff) {
-                memcpy(xfer_buff, buff, size);
                 ret = usb_control_msg(usb,
                                       usb_sndctrlpipe(usb, 0),
                                       LOAD_INTERNAL,
@@ -595,14 +594,12 @@ static int uea_idma_write(struct uea_softc *sc, void *data, u32 size)
         u8 *xfer_buff;
         int bytes_read;
 
-        xfer_buff = kmalloc(size, GFP_KERNEL);
+        xfer_buff = kmemdup(data, size, GFP_KERNEL);
         if (!xfer_buff) {
                 uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
                 return ret;
         }
 
-        memcpy(xfer_buff, data, size);
-
         ret = usb_bulk_msg(sc->usb_dev,
                          usb_sndbulkpipe(sc->usb_dev, UEA_IDMA_PIPE),
                          xfer_buff, size, &bytes_read, BULK_TIMEOUT);
@@ -765,12 +762,11 @@ static int uea_request(struct uea_softc *sc,
         u8 *xfer_buff;
         int ret = -ENOMEM;
 
-        xfer_buff = kmalloc(size, GFP_KERNEL);
+        xfer_buff = kmemdup(data, size, GFP_KERNEL);
         if (!xfer_buff) {
                 uea_err(INS_TO_USBDEV(sc), "can't allocate xfer_buff\n");
                 return ret;
         }
-        memcpy(xfer_buff, data, size);
 
         ret = usb_control_msg(sc->usb_dev, usb_sndctrlpipe(sc->usb_dev, 0),
                               UCDC_SEND_ENCAPSULATED_COMMAND,
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 6408e10fdbf..7f1fa956dcd 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -892,7 +892,7 @@ skip_normal_probe:
 
 
         /* workaround for switched endpoints */
-        if ((epread->bEndpointAddress & USB_DIR_IN) != USB_DIR_IN) {
+        if (!usb_endpoint_dir_in(epread)) {
                 /* descriptors are swapped */
                 struct usb_endpoint_descriptor *t;
                 dev_dbg(&intf->dev,"The data interface has switched endpoints");
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 6e3b5358a76..f8324d8d06a 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -72,6 +72,21 @@ config USB_SUSPEND
 
           If you are unsure about this, say N here.
 
+config USB_MULTITHREAD_PROBE
+        bool "USB Multi-threaded probe (EXPERIMENTAL)"
+        depends on USB && EXPERIMENTAL
+        default n
+        help
+          Say Y here if you want the USB core to spawn a new thread for
+          every USB device that is probed.  This can cause a small speedup
+          in boot times on systems with a lot of different USB devices.
+
+          This option should be safe to enable, but if any odd probing
+          problems are found, please disable it, or dynamically turn it
+          off in the /sys/module/usbcore/parameters/multithread_probe
+          file
+
+          When in doubt, say N.
 
 config USB_OTG
         bool
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 3538c2fdadf..ea398e5d50a 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -175,12 +175,13 @@ static char *usb_dump_endpoint_descriptor (
 )
 {
         char dir, unit, *type;
-        unsigned interval, in, bandwidth = 1;
+        unsigned interval, bandwidth = 1;
 
         if (start > end)
                 return start;
-        in = (desc->bEndpointAddress & USB_DIR_IN);
-        dir = in ? 'I' : 'O';
+
+        dir = usb_endpoint_dir_in(desc) ? 'I' : 'O';
+
         if (speed == USB_SPEED_HIGH) {
                 switch (le16_to_cpu(desc->wMaxPacketSize) & (0x03 << 11)) {
                 case 1 << 11:   bandwidth = 2; break;
@@ -204,7 +205,7 @@ static char *usb_dump_endpoint_descriptor (
                 break;
         case USB_ENDPOINT_XFER_BULK:
                 type = "Bulk";
-                if (speed == USB_SPEED_HIGH && !in)     /* uframes per NAK */
+                if (speed == USB_SPEED_HIGH && dir == 'O') /* uframes per NAK */
                         interval = desc->bInterval;
                 else
                         interval = 0;
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index fed92be63b5..3ed4cb2d56d 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -561,7 +561,7 @@ static int usbdev_open(struct inode *inode, struct file *file)
                 dev = inode->i_private;
         if (!dev)
                 goto out;
-        ret = usb_autoresume_device(dev, 1);
+        ret = usb_autoresume_device(dev);
         if (ret)
                 goto out;
 
@@ -609,7 +609,7 @@ static int usbdev_release(struct inode *inode, struct file *file)
                         releaseintf(ps, ifnum);
         }
         destroy_all_async(ps);
-        usb_autosuspend_device(dev, 1);
+        usb_autosuspend_device(dev);
         usb_unlock_device(dev);
         usb_put_dev(dev);
         put_pid(ps->disc_pid);
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 113e484c763..d6eb5ce1dd1 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -205,7 +205,7 @@ static int usb_probe_interface(struct device *dev)
         if (id) {
                 dev_dbg(dev, "%s - got id\n", __FUNCTION__);
 
-                error = usb_autoresume_device(udev, 1);
+                error = usb_autoresume_device(udev);
                 if (error)
                         return error;
 
@@ -229,7 +229,7 @@ static int usb_probe_interface(struct device *dev)
                 } else
                         intf->condition = USB_INTERFACE_BOUND;
 
-                usb_autosuspend_device(udev, 1);
+                usb_autosuspend_device(udev);
         }
 
         return error;
@@ -247,7 +247,7 @@ static int usb_unbind_interface(struct device *dev)
 
         /* Autoresume for set_interface call below */
         udev = interface_to_usbdev(intf);
-        error = usb_autoresume_device(udev, 1);
+        error = usb_autoresume_device(udev);
 
         /* release all urbs for this interface */
         usb_disable_interface(interface_to_usbdev(intf), intf);
@@ -265,7 +265,7 @@ static int usb_unbind_interface(struct device *dev)
         intf->needs_remote_wakeup = 0;
 
         if (!error)
-                usb_autosuspend_device(udev, 1);
+                usb_autosuspend_device(udev);
 
         return 0;
 }
@@ -408,6 +408,16 @@ static int usb_match_one_id(struct usb_interface *interface,
             (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
                 return 0;
 
+        /* The interface class, subclass, and protocol should never be
+         * checked for a match if the device class is Vendor Specific,
+         * unless the match record specifies the Vendor ID. */
+        if (dev->descriptor.bDeviceClass == USB_CLASS_VENDOR_SPEC &&
+                        !(id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+                        (id->match_flags & (USB_DEVICE_ID_MATCH_INT_CLASS |
+                                USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+                                USB_DEVICE_ID_MATCH_INT_PROTOCOL)))
+                return 0;
+
         if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_CLASS) &&
             (id->bInterfaceClass != intf->desc.bInterfaceClass))
                 return 0;
@@ -476,7 +486,17 @@ static int usb_match_one_id(struct usb_interface *interface,
  * most general; they let drivers bind to any interface on a
  * multiple-function device.  Use the USB_INTERFACE_INFO
  * macro, or its siblings, to match class-per-interface style
- * devices (as recorded in bDeviceClass).
+ * devices (as recorded in bInterfaceClass).
+ *
+ * Note that an entry created by USB_INTERFACE_INFO won't match
+ * any interface if the device class is set to Vendor-Specific.
+ * This is deliberate; according to the USB spec the meanings of
+ * the interface class/subclass/protocol for these devices are also
+ * vendor-specific, and hence matching against a standard product
+ * class wouldn't work anyway.  If you really want to use an
+ * interface-based match for such a device, create a match record
+ * that also specifies the vendor ID.  (Unforunately there isn't a
+ * standard macro for creating records like this.)
  *
  * Within those groups, remember that not all combinations are
  * meaningful.  For example, don't give a product version range
@@ -505,7 +525,7 @@ const struct usb_device_id *usb_match_id(struct usb_interface *interface,
 }
 EXPORT_SYMBOL_GPL_FUTURE(usb_match_id);
 
-int usb_device_match(struct device *dev, struct device_driver *drv)
+static int usb_device_match(struct device *dev, struct device_driver *drv)
 {
         /* devices and interfaces are handled separately */
         if (is_usb_device(dev)) {
@@ -790,7 +810,7 @@ EXPORT_SYMBOL_GPL_FUTURE(usb_deregister);
 #ifdef CONFIG_PM
 
 /* Caller has locked udev's pm_mutex */
-static int suspend_device(struct usb_device *udev, pm_message_t msg)
+static int usb_suspend_device(struct usb_device *udev, pm_message_t msg)
 {
         struct usb_device_driver        *udriver;
         int                             status = 0;
@@ -817,7 +837,7 @@ done:
 }
 
 /* Caller has locked udev's pm_mutex */
-static int resume_device(struct usb_device *udev)
+static int usb_resume_device(struct usb_device *udev)
 {
         struct usb_device_driver        *udriver;
         int                             status = 0;
@@ -843,7 +863,7 @@ done:
 }
 
 /* Caller has locked intf's usb_device's pm mutex */
-static int suspend_interface(struct usb_interface *intf, pm_message_t msg)
+static int usb_suspend_interface(struct usb_interface *intf, pm_message_t msg)
 {
         struct usb_driver       *driver;
         int                     status = 0;
@@ -880,7 +900,7 @@ done:
 }
 
 /* Caller has locked intf's usb_device's pm_mutex */
-static int resume_interface(struct usb_interface *intf)
+static int usb_resume_interface(struct usb_interface *intf)
 {
         struct usb_driver       *driver;
         int                     status = 0;
@@ -920,6 +940,44 @@ done:
         return status;
 }
 
+#ifdef  CONFIG_USB_SUSPEND
+
+/* Internal routine to check whether we may autosuspend a device. */
+static int autosuspend_check(struct usb_device *udev)
+{
+        int                     i;
+        struct usb_interface    *intf;
+
+        /* For autosuspend, fail fast if anything is in use.
+         * Also fail if any interfaces require remote wakeup but it
+         * isn't available. */
+        udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
+        if (udev->pm_usage_cnt > 0)
+                return -EBUSY;
+        if (udev->actconfig) {
+                for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
+                        intf = udev->actconfig->interface[i];
+                        if (!is_active(intf))
+                                continue;
+                        if (intf->pm_usage_cnt > 0)
+                                return -EBUSY;
+                        if (intf->needs_remote_wakeup &&
+                                        !udev->do_remote_wakeup) {
+                                dev_dbg(&udev->dev, "remote wakeup needed "
+                                                "for autosuspend\n");
+                                return -EOPNOTSUPP;
+                        }
+                }
+        }
+        return 0;
+}
+
+#else
+
+#define autosuspend_check(udev)         0
+
+#endif
+
 /**
  * usb_suspend_both - suspend a USB device and its interfaces
  * @udev: the usb_device to suspend
@@ -971,52 +1029,34 @@ int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 
         udev->do_remote_wakeup = device_may_wakeup(&udev->dev);
 
-        /* For autosuspend, fail fast if anything is in use.
-         * Also fail if any interfaces require remote wakeup but it
-         * isn't available. */
         if (udev->auto_pm) {
-                if (udev->pm_usage_cnt > 0)
-                        return -EBUSY;
-                if (udev->actconfig) {
-                        for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
-                                intf = udev->actconfig->interface[i];
-                                if (!is_active(intf))
-                                        continue;
-                                if (intf->pm_usage_cnt > 0)
-                                        return -EBUSY;
-                                if (intf->needs_remote_wakeup &&
-                                                !udev->do_remote_wakeup) {
-                                        dev_dbg(&udev->dev,
-        "remote wakeup needed for autosuspend\n");
-                                        return -EOPNOTSUPP;
-                                }
-                        }
-                        i = 0;
-                }
+                status = autosuspend_check(udev);
+                if (status < 0)
+                        return status;
         }
 
         /* Suspend all the interfaces and then udev itself */
         if (udev->actconfig) {
                 for (; i < udev->actconfig->desc.bNumInterfaces; i++) {
                         intf = udev->actconfig->interface[i];
-                        status = suspend_interface(intf, msg);
+                        status = usb_suspend_interface(intf, msg);
                         if (status != 0)
                                 break;
                 }
         }
         if (status == 0)
-                status = suspend_device(udev, msg);
+                status = usb_suspend_device(udev, msg);
 
         /* If the suspend failed, resume interfaces that did get suspended */
         if (status != 0) {
                 while (--i >= 0) {
                         intf = udev->actconfig->interface[i];
-                        resume_interface(intf);
+                        usb_resume_interface(intf);
                 }
 
         /* If the suspend succeeded, propagate it up the tree */
         } else if (parent)
-                usb_autosuspend_device(parent, 0);
+                usb_autosuspend_device(parent);
 
         // dev_dbg(&udev->dev, "%s: status %d\n", __FUNCTION__, status);
         return status;
@@ -1064,9 +1104,25 @@ int usb_resume_both(struct usb_device *udev)
         /* Propagate the resume up the tree, if necessary */
         if (udev->state == USB_STATE_SUSPENDED) {
                 if (parent) {
-                        usb_pm_lock(parent);
-                        parent->auto_pm = 1;
-                        status = usb_resume_both(parent);
+                        status = usb_autoresume_device(parent);
+                        if (status == 0) {
+                                status = usb_resume_device(udev);
+                                if (status) {
+                                        usb_autosuspend_device(parent);
+
+                                        /* It's possible usb_resume_device()
+                                         * failed after the port was
+                                         * unsuspended, causing udev to be
+                                         * logically disconnected.  We don't
+                                         * want usb_disconnect() to autosuspend
+                                         * the parent again, so tell it that
+                                         * udev disconnected while still
+                                         * suspended. */
+                                        if (udev->state ==
+                                                        USB_STATE_NOTATTACHED)
+                                                udev->discon_suspended = 1;
+                                }
+                        }
                 } else {
 
                         /* We can't progagate beyond the USB subsystem,
@@ -1075,24 +1131,20 @@ int usb_resume_both(struct usb_device *udev)
                         if (udev->dev.parent->power.power_state.event !=
                                         PM_EVENT_ON)
                                 status = -EHOSTUNREACH;
-                }
-                if (status == 0)
-                        status = resume_device(udev);
-                if (parent)
-                        usb_pm_unlock(parent);
+                        else
+                                status = usb_resume_device(udev);
+                }
         } else {
 
                 /* Needed only for setting udev->dev.power.power_state.event
                  * and for possible debugging message. */
-                status = resume_device(udev);
+                status = usb_resume_device(udev);
         }
 
-        /* Now the parent won't suspend until we are finished */
-
         if (status == 0 && udev->actconfig) {
                 for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
                         intf = udev->actconfig->interface[i];
-                        resume_interface(intf);
+                        usb_resume_interface(intf);
                 }
         }
 
@@ -1102,39 +1154,53 @@ int usb_resume_both(struct usb_device *udev)
 
 #ifdef CONFIG_USB_SUSPEND
 
+/* Internal routine to adjust a device's usage counter and change
+ * its autosuspend state.
+ */
+static int usb_autopm_do_device(struct usb_device *udev, int inc_usage_cnt)
+{
+        int     status = 0;
+
+        usb_pm_lock(udev);
+        udev->pm_usage_cnt += inc_usage_cnt;
+        WARN_ON(udev->pm_usage_cnt < 0);
+        if (inc_usage_cnt >= 0 && udev->pm_usage_cnt > 0) {
+                udev->auto_pm = 1;
+                status = usb_resume_both(udev);
+                if (status != 0)
+                        udev->pm_usage_cnt -= inc_usage_cnt;
+        } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
+                queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
+                                USB_AUTOSUSPEND_DELAY);
+        usb_pm_unlock(udev);
+        return status;
+}
+
 /**
  * usb_autosuspend_device - delayed autosuspend of a USB device and its interfaces
  * @udev: the usb_device to autosuspend
- * @dec_usage_cnt: flag to decrement @udev's PM-usage counter
  *
  * This routine should be called when a core subsystem is finished using
  * @udev and wants to allow it to autosuspend.  Examples would be when
  * @udev's device file in usbfs is closed or after a configuration change.
  *
- * @dec_usage_cnt should be 1 if the subsystem previously incremented
- * @udev's usage counter (such as by passing 1 to usb_autoresume_device);
- * otherwise it should be 0.
- *
- * If the usage counter for @udev or any of its active interfaces is greater
- * than 0, the autosuspend request will not be queued.  (If an interface
- * driver does not support autosuspend then its usage counter is permanently
- * positive.)  Likewise, if an interface driver requires remote-wakeup
- * capability during autosuspend but remote wakeup is disabled, the
- * autosuspend will fail.
+ * @udev's usage counter is decremented.  If it or any of the usage counters
+ * for an active interface is greater than 0, no autosuspend request will be
+ * queued.  (If an interface driver does not support autosuspend then its
+ * usage counter is permanently positive.)  Furthermore, if an interface
+ * driver requires remote-wakeup capability during autosuspend but remote
+ * wakeup is disabled, the autosuspend will fail.
  *
  * Often the caller will hold @udev's device lock, but this is not
  * necessary.
  *
  * This routine can run only in process context.
  */
-void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt)
+void usb_autosuspend_device(struct usb_device *udev)
 {
-        usb_pm_lock(udev);
-        udev->pm_usage_cnt -= dec_usage_cnt;
-        if (udev->pm_usage_cnt <= 0)
-                queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
-                                USB_AUTOSUSPEND_DELAY);
-        usb_pm_unlock(udev);
+        int     status;
+
+        status = usb_autopm_do_device(udev, -1);
         // dev_dbg(&udev->dev, "%s: cnt %d\n",
         //              __FUNCTION__, udev->pm_usage_cnt);
 }
@@ -1142,44 +1208,59 @@ void usb_autosuspend_device(struct usb_device *udev, int dec_usage_cnt)
 /**
  * usb_autoresume_device - immediately autoresume a USB device and its interfaces
  * @udev: the usb_device to autoresume
- * @inc_usage_cnt: flag to increment @udev's PM-usage counter
  *
  * This routine should be called when a core subsystem wants to use @udev
- * and needs to guarantee that it is not suspended.  In addition, the
- * caller can prevent @udev from being autosuspended subsequently.  (Note
- * that this will not prevent suspend events originating in the PM core.)
- * Examples would be when @udev's device file in usbfs is opened (autosuspend
- * should be prevented until the file is closed) or when a remote-wakeup
- * request is received (later autosuspends should not be prevented).
+ * and needs to guarantee that it is not suspended.  No autosuspend will
+ * occur until usb_autosuspend_device is called.  (Note that this will not
+ * prevent suspend events originating in the PM core.)  Examples would be
+ * when @udev's device file in usbfs is opened or when a remote-wakeup
+ * request is received.
  *
- * @inc_usage_cnt should be 1 to increment @udev's usage counter and prevent
- * autosuspends.  This prevention will persist until the usage counter is
- * decremented again (such as by passing 1 to usb_autosuspend_device).
- * Otherwise @inc_usage_cnt should be 0 to leave the usage counter unchanged.
- * Regardless, if the autoresume fails then the usage counter is not
- * incremented.
+ * @udev's usage counter is incremented to prevent subsequent autosuspends.
+ * However if the autoresume fails then the usage counter is re-decremented.
  *
  * Often the caller will hold @udev's device lock, but this is not
  * necessary (and attempting it might cause deadlock).
  *
  * This routine can run only in process context.
  */
-int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt)
+int usb_autoresume_device(struct usb_device *udev)
 {
         int     status;
 
-        usb_pm_lock(udev);
-        udev->pm_usage_cnt += inc_usage_cnt;
-        udev->auto_pm = 1;
-        status = usb_resume_both(udev);
-        if (status != 0)
-                udev->pm_usage_cnt -= inc_usage_cnt;
-        usb_pm_unlock(udev);
+        status = usb_autopm_do_device(udev, 1);
         // dev_dbg(&udev->dev, "%s: status %d cnt %d\n",
         //              __FUNCTION__, status, udev->pm_usage_cnt);
         return status;
 }
 
+/* Internal routine to adjust an interface's usage counter and change
+ * its device's autosuspend state.
+ */
+static int usb_autopm_do_interface(struct usb_interface *intf,
+                int inc_usage_cnt)
+{
+        struct usb_device       *udev = interface_to_usbdev(intf);
+        int                     status = 0;
+
+        usb_pm_lock(udev);
+        if (intf->condition == USB_INTERFACE_UNBOUND)
+                status = -ENODEV;
+        else {
+                intf->pm_usage_cnt += inc_usage_cnt;
+                if (inc_usage_cnt >= 0 && intf->pm_usage_cnt > 0) {
+                        udev->auto_pm = 1;
+                        status = usb_resume_both(udev);
+                        if (status != 0)
+                                intf->pm_usage_cnt -= inc_usage_cnt;
+                } else if (inc_usage_cnt <= 0 && autosuspend_check(udev) == 0)
+                        queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
+                                        USB_AUTOSUSPEND_DELAY);
+        }
+        usb_pm_unlock(udev);
+        return status;
+}
+
 /**
  * usb_autopm_put_interface - decrement a USB interface's PM-usage counter
  * @intf: the usb_interface whose counter should be decremented
@@ -1213,17 +1294,11 @@ int usb_autoresume_device(struct usb_device *udev, int inc_usage_cnt)
  */
 void usb_autopm_put_interface(struct usb_interface *intf)
 {
-        struct usb_device       *udev = interface_to_usbdev(intf);
+        int     status;
 
-        usb_pm_lock(udev);
-        if (intf->condition != USB_INTERFACE_UNBOUND &&
-                        --intf->pm_usage_cnt <= 0) {
-                queue_delayed_work(ksuspend_usb_wq, &udev->autosuspend,
-                                USB_AUTOSUSPEND_DELAY);
-        }
-        usb_pm_unlock(udev);
-        // dev_dbg(&intf->dev, "%s: cnt %d\n",
-        //              __FUNCTION__, intf->pm_usage_cnt);
+        status = usb_autopm_do_interface(intf, -1);
+        // dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
+        //              __FUNCTION__, status, intf->pm_usage_cnt);
 }
 EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
 
@@ -1260,26 +1335,37 @@ EXPORT_SYMBOL_GPL(usb_autopm_put_interface);
  */
 int usb_autopm_get_interface(struct usb_interface *intf)
 {
-        struct usb_device       *udev = interface_to_usbdev(intf);
-        int                     status;
+        int     status;
 
-        usb_pm_lock(udev);
-        if (intf->condition == USB_INTERFACE_UNBOUND)
-                status = -ENODEV;
-        else {
-                ++intf->pm_usage_cnt;
-                udev->auto_pm = 1;
-                status = usb_resume_both(udev);
-                if (status != 0)
-                        --intf->pm_usage_cnt;
-        }
-        usb_pm_unlock(udev);
+        status = usb_autopm_do_interface(intf, 1);
         // dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
         //              __FUNCTION__, status, intf->pm_usage_cnt);
         return status;
 }
 EXPORT_SYMBOL_GPL(usb_autopm_get_interface);
 
+/**
+ * usb_autopm_set_interface - set a USB interface's autosuspend state
+ * @intf: the usb_interface whose state should be set
+ *
+ * This routine sets the autosuspend state of @intf's device according
+ * to @intf's usage counter, which the caller must have set previously.
+ * If the counter is <= 0, the device is autosuspended (if it isn't
+ * already suspended and if nothing else prevents the autosuspend).  If
+ * the counter is > 0, the device is autoresumed (if it isn't already
+ * awake).
+ */
+int usb_autopm_set_interface(struct usb_interface *intf)
+{
+        int     status;
+
+        status = usb_autopm_do_interface(intf, 0);
+        // dev_dbg(&intf->dev, "%s: status %d cnt %d\n",
+        //              __FUNCTION__, status, intf->pm_usage_cnt);
+        return status;
+}
+EXPORT_SYMBOL_GPL(usb_autopm_set_interface);
+
 #endif /* CONFIG_USB_SUSPEND */
 
 static int usb_suspend(struct device *dev, pm_message_t message)
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 3b2d137912b..c505b767cee 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -10,15 +10,20 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
 #include <linux/usb.h>
 #include "usb.h"
 
-/* endpoint stuff */
+#define MAX_ENDPOINT_MINORS (64*128*32)
+static int usb_endpoint_major;
+static DEFINE_IDR(endpoint_idr);
 
 struct ep_device {
         struct usb_endpoint_descriptor *desc;
         struct usb_device *udev;
         struct device dev;
+        int minor;
 };
 #define to_ep_device(_dev) \
         container_of(_dev, struct ep_device, dev)
@@ -152,6 +157,55 @@ static struct attribute_group ep_dev_attr_grp = {
         .attrs = ep_dev_attrs,
 };
 
+static int usb_endpoint_major_init(void)
+{
+        dev_t dev;
+        int error;
+
+        error = alloc_chrdev_region(&dev, 0, MAX_ENDPOINT_MINORS,
+                                    "usb_endpoint");
+        if (error) {
+                err("unable to get a dynamic major for usb endpoints");
+                return error;
+        }
+        usb_endpoint_major = MAJOR(dev);
+
+        return error;
+}
+
+static void usb_endpoint_major_cleanup(void)
+{
+        unregister_chrdev_region(MKDEV(usb_endpoint_major, 0),
+                                 MAX_ENDPOINT_MINORS);
+}
+
+static int endpoint_get_minor(struct ep_device *ep_dev)
+{
+        static DEFINE_MUTEX(minor_lock);
+        int retval = -ENOMEM;
+        int id;
+
+        mutex_lock(&minor_lock);
+        if (idr_pre_get(&endpoint_idr, GFP_KERNEL) == 0)
+                goto exit;
+
+        retval = idr_get_new(&endpoint_idr, ep_dev, &id);
+        if (retval < 0) {
+                if (retval == -EAGAIN)
+                        retval = -ENOMEM;
+                goto exit;
+        }
+        ep_dev->minor = id & MAX_ID_MASK;
+exit:
+        mutex_unlock(&minor_lock);
+        return retval;
+}
+
+static void endpoint_free_minor(struct ep_device *ep_dev)
+{
+        idr_remove(&endpoint_idr, ep_dev->minor);
+}
+
 static struct endpoint_class {
         struct kref kref;
         struct class *class;
@@ -176,11 +230,20 @@ static int init_endpoint_class(void)
         ep_class->class = class_create(THIS_MODULE, "usb_endpoint");
         if (IS_ERR(ep_class->class)) {
                 result = IS_ERR(ep_class->class);
-                kfree(ep_class);
-                ep_class = NULL;
-                goto exit;
+                goto class_create_error;
         }
 
+        result = usb_endpoint_major_init();
+        if (result)
+                goto endpoint_major_error;
+
+        goto exit;
+
+endpoint_major_error:
+        class_destroy(ep_class->class);
+class_create_error:
+        kfree(ep_class);
+        ep_class = NULL;
 exit:
         return result;
 }
@@ -191,6 +254,7 @@ static void release_endpoint_class(struct kref *kref)
         class_destroy(ep_class->class);
         kfree(ep_class);
         ep_class = NULL;
+        usb_endpoint_major_cleanup();
 }
 
 static void destroy_endpoint_class(void)
@@ -213,7 +277,6 @@ int usb_create_ep_files(struct device *parent,
 {
         char name[8];
         struct ep_device *ep_dev;
-        int minor;
         int retval;
 
         retval = init_endpoint_class();
@@ -226,12 +289,16 @@ int usb_create_ep_files(struct device *parent,
                 goto error_alloc;
         }
 
-        /* fun calculation to determine the minor of this endpoint */
-        minor = (((udev->bus->busnum - 1) * 128) * 16) + (udev->devnum - 1);
+        retval = endpoint_get_minor(ep_dev);
+        if (retval) {
+                dev_err(parent, "can not allocate minor number for %s",
+                        ep_dev->dev.bus_id);
+                goto error_register;
+        }
 
         ep_dev->desc = &endpoint->desc;
         ep_dev->udev = udev;
-        ep_dev->dev.devt = MKDEV(442, minor);   // FIXME fake number...
+        ep_dev->dev.devt = MKDEV(usb_endpoint_major, ep_dev->minor);
         ep_dev->dev.class = ep_class->class;
         ep_dev->dev.parent = parent;
         ep_dev->dev.release = ep_device_release;
@@ -241,7 +308,7 @@ int usb_create_ep_files(struct device *parent,
 
         retval = device_register(&ep_dev->dev);
         if (retval)
-                goto error_register;
+                goto error_chrdev;
         retval = sysfs_create_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
         if (retval)
                 goto error_group;
@@ -261,6 +328,9 @@ error_group:
         destroy_endpoint_class();
         return retval;
 
+error_chrdev:
+        endpoint_free_minor(ep_dev);
+
 error_register:
         kfree(ep_dev);
 error_alloc:
@@ -271,14 +341,16 @@ exit:
 
 void usb_remove_ep_files(struct usb_host_endpoint *endpoint)
 {
+        struct ep_device *ep_dev = endpoint->ep_dev;
 
-        if (endpoint->ep_dev) {
+        if (ep_dev) {
                 char name[8];
 
                 sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
-                sysfs_remove_link(&endpoint->ep_dev->dev.parent->kobj, name);
-                sysfs_remove_group(&endpoint->ep_dev->dev.kobj, &ep_dev_attr_grp);
-                device_unregister(&endpoint->ep_dev->dev);
+                sysfs_remove_link(&ep_dev->dev.parent->kobj, name);
+                sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
+                endpoint_free_minor(ep_dev);
+                device_unregister(&ep_dev->dev);
                 endpoint->ep_dev = NULL;
                 destroy_endpoint_class();
         }
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index afa2dd20332..10064af65d1 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -256,7 +256,9 @@ static const u8 hs_rh_config_descriptor [] = {
         0x05,       /*  __u8  ep_bDescriptorType; Endpoint */
         0x81,       /*  __u8  ep_bEndpointAddress; IN Endpoint 1 */
         0x03,       /*  __u8  ep_bmAttributes; Interrupt */
-        0x02, 0x00, /*  __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
+                    /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
+                     * see hub.c:hub_configure() for details. */
+        (USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
         0x0c        /*  __u8  ep_bInterval; (256ms -- usb 2.0 spec) */
 };
 
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index ad0ffbe8f7d..39186db1015 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -31,6 +31,47 @@
 #include "hcd.h"
 #include "hub.h"
 
+struct usb_hub {
+        struct device           *intfdev;       /* the "interface" device */
+        struct usb_device       *hdev;
+        struct urb              *urb;           /* for interrupt polling pipe */
+
+        /* buffer for urb ... with extra space in case of babble */
+        char                    (*buffer)[8];
+        dma_addr_t              buffer_dma;     /* DMA address for buffer */
+        union {
+                struct usb_hub_status   hub;
+                struct usb_port_status  port;
+        }                       *status;        /* buffer for status reports */
+
+        int                     error;          /* last reported error */
+        int                     nerrors;        /* track consecutive errors */
+
+        struct list_head        event_list;     /* hubs w/data or errs ready */
+        unsigned long           event_bits[1];  /* status change bitmask */
+        unsigned long           change_bits[1]; /* ports with logical connect
+                                                        status change */
+        unsigned long           busy_bits[1];   /* ports being reset or
+                                                        resumed */
+#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
+#error event_bits[] is too short!
+#endif
+
+        struct usb_hub_descriptor *descriptor;  /* class descriptor */
+        struct usb_tt           tt;             /* Transaction Translator */
+
+        unsigned                mA_per_port;    /* current for each child */
+
+        unsigned                limited_power:1;
+        unsigned                quiescing:1;
+        unsigned                activating:1;
+
+        unsigned                has_indicators:1;
+        u8                      indicator[USB_MAXCHILDREN];
+        struct work_struct      leds;
+};
+
+
 /* Protect struct usb_device->state and ->children members
  * Note: Both are also protected by ->dev.sem, except that ->state can
  * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
@@ -45,6 +86,16 @@ static DECLARE_WAIT_QUEUE_HEAD(khubd_wait);
 
 static struct task_struct *khubd_task;
 
+/* multithreaded probe logic */
+static int multithread_probe =
+#ifdef CONFIG_USB_MULTITHREAD_PROBE
+        1;
+#else
+        0;
+#endif
+module_param(multithread_probe, bool, S_IRUGO);
+MODULE_PARM_DESC(multithread_probe, "Run each USB device probe in a new thread");
+
 /* cycle leds on hubs that aren't blinking for attention */
 static int blinkenlights = 0;
 module_param (blinkenlights, bool, S_IRUGO);
@@ -277,6 +328,9 @@ static void kick_khubd(struct usb_hub *hub)
 {
         unsigned long   flags;
 
+        /* Suppress autosuspend until khubd runs */
+        to_usb_interface(hub->intfdev)->pm_usage_cnt = 1;
+
         spin_lock_irqsave(&hub_event_lock, flags);
         if (list_empty(&hub->event_list)) {
                 list_add_tail(&hub->event_list, &hub_event_list);
@@ -459,7 +513,6 @@ static void hub_quiesce(struct usb_hub *hub)
         /* (nonblocking) khubd and related activity won't re-trigger */
         hub->quiescing = 1;
         hub->activating = 0;
-        hub->resume_root_hub = 0;
 
         /* (blocking) stop khubd and related activity */
         usb_kill_urb(hub->urb);
@@ -475,7 +528,7 @@ static void hub_activate(struct usb_hub *hub)
 
         hub->quiescing = 0;
         hub->activating = 1;
-        hub->resume_root_hub = 0;
+
         status = usb_submit_urb(hub->urb, GFP_NOIO);
         if (status < 0)
                 dev_err(hub->intfdev, "activate --> %d\n", status);
@@ -761,7 +814,12 @@ static int hub_configure(struct usb_hub *hub,
                 dev_dbg(hub_dev, "%sover-current condition exists\n",
                         (hubstatus & HUB_STATUS_OVERCURRENT) ? "" : "no ");
 
-        /* set up the interrupt endpoint */
+        /* set up the interrupt endpoint
+         * We use the EP's maxpacket size instead of (PORTS+1+7)/8
+         * bytes as USB2.0[11.12.3] says because some hubs are known
+         * to send more data (and thus cause overflow). For root hubs,
+         * maxpktsize is defined in hcd.c's fake endpoint descriptors
+         * to be big enough for at least USB_MAXCHILDREN ports. */
         pipe = usb_rcvintpipe(hdev, endpoint->bEndpointAddress);
         maxp = usb_maxpacket(hdev, pipe, usb_pipeout(pipe));
 
@@ -885,6 +943,7 @@ descriptor_error:
         INIT_DELAYED_WORK(&hub->leds, led_work);
 
         usb_set_intfdata (intf, hub);
+        intf->needs_remote_wakeup = 1;
 
         if (hdev->speed == USB_SPEED_HIGH)
                 highspeed_hubs++;
@@ -982,6 +1041,8 @@ static void recursively_mark_NOTATTACHED(struct usb_device *udev)
                 if (udev->children[i])
                         recursively_mark_NOTATTACHED(udev->children[i]);
         }
+        if (udev->state == USB_STATE_SUSPENDED)
+                udev->discon_suspended = 1;
         udev->state = USB_STATE_NOTATTACHED;
 }
 
@@ -1171,6 +1232,14 @@ void usb_disconnect(struct usb_device **pdev)
         *pdev = NULL;
         spin_unlock_irq(&device_state_lock);
 
+        /* Decrement the parent's count of unsuspended children */
+        if (udev->parent) {
+                usb_pm_lock(udev);
+                if (!udev->discon_suspended)
+                        usb_autosuspend_device(udev->parent);
+                usb_pm_unlock(udev);
+        }
+
         put_device(&udev->dev);
 }
 
@@ -1193,29 +1262,17 @@ static inline void show_string(struct usb_device *udev, char *id, char *string)
 static int __usb_port_suspend(struct usb_device *, int port1);
 #endif
 
-/**
- * usb_new_device - perform initial device setup (usbcore-internal)
- * @udev: newly addressed device (in ADDRESS state)
- *
- * This is called with devices which have been enumerated, but not yet
- * configured.  The device descriptor is available, but not descriptors
- * for any device configuration.  The caller must have locked either
- * the parent hub (if udev is a normal device) or else the
- * usb_bus_list_lock (if udev is a root hub).  The parent's pointer to
- * udev has already been installed, but udev is not yet visible through
- * sysfs or other filesystem code.
- *
- * Returns 0 for success (device is configured and listed, with its
- * interfaces, in sysfs); else a negative errno value.
- *
- * This call is synchronous, and may not be used in an interrupt context.
- *
- * Only the hub driver or root-hub registrar should ever call this.
- */
-int usb_new_device(struct usb_device *udev)
+static int __usb_new_device(void *void_data)
 {
+        struct usb_device *udev = void_data;
         int err;
 
+        /* Lock ourself into memory in order to keep a probe sequence
+         * sleeping in a new thread from allowing us to be unloaded.
+         */
+        if (!try_module_get(THIS_MODULE))
+                return -EINVAL;
+
         err = usb_get_configuration(udev);
         if (err < 0) {
                 dev_err(&udev->dev, "can't read configurations, error %d\n",
@@ -1311,13 +1368,56 @@ int usb_new_device(struct usb_device *udev)
                 goto fail;
         }
 
-        return 0;
+        /* Increment the parent's count of unsuspended children */
+        if (udev->parent)
+                usb_autoresume_device(udev->parent);
+
+exit:
+        module_put(THIS_MODULE);
+        return err;
 
 fail:
         usb_set_device_state(udev, USB_STATE_NOTATTACHED);
-        return err;
+        goto exit;
 }
 
+/**
+ * usb_new_device - perform initial device setup (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is called with devices which have been enumerated, but not yet
+ * configured.  The device descriptor is available, but not descriptors
+ * for any device configuration.  The caller must have locked either
+ * the parent hub (if udev is a normal device) or else the
+ * usb_bus_list_lock (if udev is a root hub).  The parent's pointer to
+ * udev has already been installed, but udev is not yet visible through
+ * sysfs or other filesystem code.
+ *
+ * The return value for this function depends on if the
+ * multithread_probe variable is set or not.  If it's set, it will
+ * return a if the probe thread was successfully created or not.  If the
+ * variable is not set, it will return if the device is configured
+ * properly or not.  interfaces, in sysfs); else a negative errno value.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Only the hub driver or root-hub registrar should ever call this.
+ */
+int usb_new_device(struct usb_device *udev)
+{
+        struct task_struct *probe_task;
+        int ret = 0;
+
+        if (multithread_probe) {
+                probe_task = kthread_run(__usb_new_device, udev,
+                                         "usb-probe-%s", udev->devnum);
+                if (IS_ERR(probe_task))
+                        ret = PTR_ERR(probe_task);
+        } else
+                ret = __usb_new_device(udev);
+
+        return ret;
+}
 
 static int hub_port_status(struct usb_hub *hub, int port1,
                                u16 *status, u16 *change)
@@ -1325,10 +1425,12 @@ static int hub_port_status(struct usb_hub *hub, int port1,
         int ret;
 
         ret = get_port_status(hub->hdev, port1, &hub->status->port);
-        if (ret < 0)
+        if (ret < 4) {
                 dev_err (hub->intfdev,
                         "%s failed (err = %d)\n", __FUNCTION__, ret);
-        else {
+                if (ret >= 0)
+                        ret = -EIO;
+        } else {
                 *status = le16_to_cpu(hub->status->port.wPortStatus);
                 *change = le16_to_cpu(hub->status->port.wPortChange); 
                 ret = 0;
@@ -1676,6 +1778,12 @@ static int
 hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
 {
         int     status;
+        u16     portchange, portstatus;
+
+        /* Skip the initial Clear-Suspend step for a remote wakeup */
+        status = hub_port_status(hub, port1, &portstatus, &portchange);
+        if (status == 0 && !(portstatus & USB_PORT_STAT_SUSPEND))
+                goto SuspendCleared;
 
         // dev_dbg(hub->intfdev, "resume port %d\n", port1);
 
@@ -1689,9 +1797,6 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
                         "can't resume port %d, status %d\n",
                         port1, status);
         } else {
-                u16             devstatus;
-                u16             portchange;
-
                 /* drive resume for at least 20 msec */
                 if (udev)
                         dev_dbg(&udev->dev, "usb %sresume\n",
@@ -1706,16 +1811,15 @@ hub_port_resume(struct usb_hub *hub, int port1, struct usb_device *udev)
                  * stop resume signaling.  Then finish the resume
                  * sequence.
                  */
-                devstatus = portchange = 0;
-                status = hub_port_status(hub, port1,
-                                &devstatus, &portchange);
+                status = hub_port_status(hub, port1, &portstatus, &portchange);
+SuspendCleared:
                 if (status < 0
-                                || (devstatus & LIVE_FLAGS) != LIVE_FLAGS
-                                || (devstatus & USB_PORT_STAT_SUSPEND) != 0
+                                || (portstatus & LIVE_FLAGS) != LIVE_FLAGS
+                                || (portstatus & USB_PORT_STAT_SUSPEND) != 0
                                 ) {
                         dev_dbg(hub->intfdev,
                                 "port %d status %04x.%04x after resume, %d\n",
-                                port1, portchange, devstatus, status);
+                                port1, portchange, portstatus, status);
                         if (status >= 0)
                                 status = -ENODEV;
                 } else {
@@ -1776,23 +1880,16 @@ static int remote_wakeup(struct usb_device *udev)
 {
         int     status = 0;
 
-        /* All this just to avoid sending a port-resume message
-         * to the parent hub! */
-
         usb_lock_device(udev);
-        usb_pm_lock(udev);
         if (udev->state == USB_STATE_SUSPENDED) {
                 dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
-                /* TRSMRCY = 10 msec */
-                msleep(10);
-                status = finish_port_resume(udev);
+                status = usb_autoresume_device(udev);
+
+                /* Give the interface drivers a chance to do something,
+                 * then autosuspend the device again. */
                 if (status == 0)
-                        udev->dev.power.power_state.event = PM_EVENT_ON;
+                        usb_autosuspend_device(udev);
         }
-        usb_pm_unlock(udev);
-
-        if (status == 0)
-                usb_autoresume_device(udev, 0);
         usb_unlock_device(udev);
         return status;
 }
@@ -1856,6 +1953,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
                 }
         }
 
+        dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
+
         /* "global suspend" of the downstream HC-to-USB interface */
         if (!hdev->parent) {
                 struct usb_bus  *bus = hdev->bus;
@@ -1878,10 +1977,12 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 
 static int hub_resume(struct usb_interface *intf)
 {
-        struct usb_device       *hdev = interface_to_usbdev(intf);
         struct usb_hub          *hub = usb_get_intfdata (intf);
+        struct usb_device       *hdev = hub->hdev;
         int                     status;
 
+        dev_dbg(&intf->dev, "%s\n", __FUNCTION__);
+
         /* "global resume" of the downstream HC-to-USB interface */
         if (!hdev->parent) {
                 struct usb_bus  *bus = hdev->bus;
@@ -1920,7 +2021,6 @@ void usb_resume_root_hub(struct usb_device *hdev)
 {
         struct usb_hub *hub = hdev_to_hub(hdev);
 
-        hub->resume_root_hub = 1;
         kick_khubd(hub);
 }
 
@@ -2557,16 +2657,13 @@ static void hub_events(void)
                 intf = to_usb_interface(hub->intfdev);
                 hub_dev = &intf->dev;
 
-                i = hub->resume_root_hub;
-
-                dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x%s\n",
+                dev_dbg(hub_dev, "state %d ports %d chg %04x evt %04x\n",
                                 hdev->state, hub->descriptor
                                         ? hub->descriptor->bNbrPorts
                                         : 0,
                                 /* NOTE: expects max 15 ports... */
                                 (u16) hub->change_bits[0],
-                                (u16) hub->event_bits[0],
-                                i ? ", resume root" : "");
+                                (u16) hub->event_bits[0]);
 
                 usb_get_intf(intf);
                 spin_unlock_irq(&hub_event_lock);
@@ -2587,16 +2684,16 @@ static void hub_events(void)
                         goto loop;
                 }
 
-                /* Is this is a root hub wanting to reactivate the downstream
-                 * ports?  If so, be sure the interface resumes even if its
-                 * stub "device" node was never suspended.
-                 */
-                if (i)
-                        usb_autoresume_device(hdev, 0);
+                /* Autoresume */
+                ret = usb_autopm_get_interface(intf);
+                if (ret) {
+                        dev_dbg(hub_dev, "Can't autoresume: %d\n", ret);
+                        goto loop;
+                }
 
-                /* If this is an inactive or suspended hub, do nothing */
+                /* If this is an inactive hub, do nothing */
                 if (hub->quiescing)
-                        goto loop;
+                        goto loop_autopm;
 
                 if (hub->error) {
                         dev_dbg (hub_dev, "resetting for error %d\n",
@@ -2606,7 +2703,7 @@ static void hub_events(void)
                         if (ret) {
                                 dev_dbg (hub_dev,
                                         "error resetting hub: %d\n", ret);
-                                goto loop;
+                                goto loop_autopm;
                         }
 
                         hub->nerrors = 0;
@@ -2734,6 +2831,10 @@ static void hub_events(void)
                 if (!hdev->parent && !hub->busy_bits[0])
                         usb_enable_root_hub_irq(hdev->bus);
 
+loop_autopm:
+                /* Allow autosuspend if we're not going to run again */
+                if (list_empty(&hub->event_list))
+                        usb_autopm_enable(intf);
 loop:
                 usb_unlock_device(hdev);
                 usb_put_intf(intf);
@@ -2775,6 +2876,7 @@ static struct usb_driver hub_driver = {
         .post_reset =   hub_post_reset,
         .ioctl =        hub_ioctl,
         .id_table =     hub_id_table,
+        .supports_autosuspend = 1,
 };
 
 int usb_hub_init(void)
@@ -2999,7 +3101,7 @@ int usb_reset_composite_device(struct usb_device *udev,
         }
 
         /* Prevent autosuspend during the reset */
-        usb_autoresume_device(udev, 1);
+        usb_autoresume_device(udev);
 
         if (iface && iface->condition != USB_INTERFACE_BINDING)
                 iface = NULL;
@@ -3042,7 +3144,7 @@ int usb_reset_composite_device(struct usb_device *udev,
                 }
         }
 
-        usb_autosuspend_device(udev, 1);
+        usb_autosuspend_device(udev);
         return ret;
 }
 EXPORT_SYMBOL(usb_reset_composite_device);
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 035d3ef3588..cf9559c6c9b 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -192,45 +192,4 @@ struct usb_tt_clear {
 
 extern void usb_hub_tt_clear_buffer (struct usb_device *dev, int pipe);
 
-struct usb_hub {
-        struct device           *intfdev;       /* the "interface" device */
-        struct usb_device       *hdev;
-        struct urb              *urb;           /* for interrupt polling pipe */
-
-        /* buffer for urb ... with extra space in case of babble */
-        char                    (*buffer)[8];
-        dma_addr_t              buffer_dma;     /* DMA address for buffer */
-        union {
-                struct usb_hub_status   hub;
-                struct usb_port_status  port;
-        }                       *status;        /* buffer for status reports */
-
-        int                     error;          /* last reported error */
-        int                     nerrors;        /* track consecutive errors */
-
-        struct list_head        event_list;     /* hubs w/data or errs ready */
-        unsigned long           event_bits[1];  /* status change bitmask */
-        unsigned long           change_bits[1]; /* ports with logical connect
-                                                        status change */
-        unsigned long           busy_bits[1];   /* ports being reset or
-                                                        resumed */
-#if USB_MAXCHILDREN > 31 /* 8*sizeof(unsigned long) - 1 */
-#error event_bits[] is too short!
-#endif
-
-        struct usb_hub_descriptor *descriptor;  /* class descriptor */
-        struct usb_tt           tt;             /* Transaction Translator */
-
-        unsigned                mA_per_port;    /* current for each child */
-
-        unsigned                limited_power:1;
-        unsigned                quiescing:1;
-        unsigned                activating:1;
-        unsigned                resume_root_hub:1;
-
-        unsigned                has_indicators:1;
-        enum hub_led_mode       indicator[USB_MAXCHILDREN];
-        struct delayed_work     leds;
-};
-
 #endif /* __LINUX_HUB_H */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 89572bc021b..7390b67c609 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -764,7 +764,7 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
                         err = -EINVAL;
                         goto errout;
                 } else {
-                        dev->have_langid = -1;
+                        dev->have_langid = 1;
                         dev->string_langid = tbuf[2] | (tbuf[3]<< 8);
                                 /* always use the first langid listed */
                         dev_dbg (&dev->dev, "default language 0x%04x\n",
@@ -1398,7 +1398,7 @@ free_interfaces:
         }
 
         /* Wake up the device so we can send it the Set-Config request */
-        ret = usb_autoresume_device(dev, 1);
+        ret = usb_autoresume_device(dev);
         if (ret)
                 goto free_interfaces;
 
@@ -1421,7 +1421,7 @@ free_interfaces:
         dev->actconfig = cp;
         if (!cp) {
                 usb_set_device_state(dev, USB_STATE_ADDRESS);
-                usb_autosuspend_device(dev, 1);
+                usb_autosuspend_device(dev);
                 goto free_interfaces;
         }
         usb_set_device_state(dev, USB_STATE_CONFIGURED);
@@ -1490,7 +1490,7 @@ free_interfaces:
                 usb_create_sysfs_intf_files (intf);
         }
 
-        usb_autosuspend_device(dev, 1);
+        usb_autosuspend_device(dev);
         return 0;
 }
 
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index ab2f68fc7d2..02426d0b9a3 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -200,13 +200,6 @@ static void ksuspend_usb_cleanup(void)
         destroy_workqueue(ksuspend_usb_wq);
 }
 
-#else
-
-#define ksuspend_usb_init()     0
-#define ksuspend_usb_cleanup()  do {} while (0)
-
-#endif
-
 #ifdef  CONFIG_USB_SUSPEND
 
 /* usb_autosuspend_work - callback routine to autosuspend a USB device */
@@ -226,7 +219,14 @@ static void usb_autosuspend_work(struct work_struct *work)
 static void usb_autosuspend_work(struct work_struct *work)
 {}
 
-#endif
+#endif  /* CONFIG_USB_SUSPEND */
+
+#else
+
+#define ksuspend_usb_init()     0
+#define ksuspend_usb_cleanup()  do {} while (0)
+
+#endif  /* CONFIG_PM */
 
 /**
  * usb_alloc_dev - usb device constructor (usbcore-internal)
@@ -538,138 +538,6 @@ int usb_get_current_frame_number(struct usb_device *dev)
         return usb_hcd_get_frame_number (dev);
 }
 
-/**
- * usb_endpoint_dir_in - check if the endpoint has IN direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type IN, otherwise it returns false.
- */
-int usb_endpoint_dir_in(const struct usb_endpoint_descriptor *epd)
-{
-        return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN);
-}
-
-/**
- * usb_endpoint_dir_out - check if the endpoint has OUT direction
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type OUT, otherwise it returns false.
- */
-int usb_endpoint_dir_out(const struct usb_endpoint_descriptor *epd)
-{
-        return ((epd->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
-}
-
-/**
- * usb_endpoint_xfer_bulk - check if the endpoint has bulk transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type bulk, otherwise it returns false.
- */
-int usb_endpoint_xfer_bulk(const struct usb_endpoint_descriptor *epd)
-{
-        return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-                USB_ENDPOINT_XFER_BULK);
-}
-
-/**
- * usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type interrupt, otherwise it returns
- * false.
- */
-int usb_endpoint_xfer_int(const struct usb_endpoint_descriptor *epd)
-{
-        return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-                USB_ENDPOINT_XFER_INT);
-}
-
-/**
- * usb_endpoint_xfer_isoc - check if the endpoint has isochronous transfer type
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint is of type isochronous, otherwise it returns
- * false.
- */
-int usb_endpoint_xfer_isoc(const struct usb_endpoint_descriptor *epd)
-{
-        return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-                USB_ENDPOINT_XFER_ISOC);
-}
-
-/**
- * usb_endpoint_is_bulk_in - check if the endpoint is bulk IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and IN direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_bulk_in(const struct usb_endpoint_descriptor *epd)
-{
-        return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_bulk_out - check if the endpoint is bulk OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has bulk transfer type and OUT direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_bulk_out(const struct usb_endpoint_descriptor *epd)
-{
-        return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd));
-}
-
-/**
- * usb_endpoint_is_int_in - check if the endpoint is interrupt IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and IN direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_int_in(const struct usb_endpoint_descriptor *epd)
-{
-        return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_int_out - check if the endpoint is interrupt OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has interrupt transfer type and OUT direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_int_out(const struct usb_endpoint_descriptor *epd)
-{
-        return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd));
-}
-
-/**
- * usb_endpoint_is_isoc_in - check if the endpoint is isochronous IN
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and IN direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_isoc_in(const struct usb_endpoint_descriptor *epd)
-{
-        return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd));
-}
-
-/**
- * usb_endpoint_is_isoc_out - check if the endpoint is isochronous OUT
- * @epd: endpoint to be checked
- *
- * Returns true if the endpoint has isochronous transfer type and OUT direction,
- * otherwise it returns false.
- */
-int usb_endpoint_is_isoc_out(const struct usb_endpoint_descriptor *epd)
-{
-        return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd));
-}
-
 /*-------------------------------------------------------------------*/
 /*
  * __usb_get_extra_descriptor() finds a descriptor of specific type in the
@@ -1103,18 +971,6 @@ EXPORT_SYMBOL(__usb_get_extra_descriptor);
 EXPORT_SYMBOL(usb_find_device);
 EXPORT_SYMBOL(usb_get_current_frame_number);
 
-EXPORT_SYMBOL_GPL(usb_endpoint_dir_in);
-EXPORT_SYMBOL_GPL(usb_endpoint_dir_out);
-EXPORT_SYMBOL_GPL(usb_endpoint_xfer_bulk);
-EXPORT_SYMBOL_GPL(usb_endpoint_xfer_int);
-EXPORT_SYMBOL_GPL(usb_endpoint_xfer_isoc);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_in);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_bulk_out);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_int_in);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_int_out);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_in);
-EXPORT_SYMBOL_GPL(usb_endpoint_is_isoc_out);
-
 EXPORT_SYMBOL (usb_buffer_alloc);
 EXPORT_SYMBOL (usb_buffer_free);
 
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 13322e33f91..17830a81be1 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -64,14 +64,13 @@ static inline void usb_pm_unlock(struct usb_device *udev) {}
 
 #define USB_AUTOSUSPEND_DELAY   (HZ*2)
 
-extern void usb_autosuspend_device(struct usb_device *udev, int dec_busy_cnt);
-extern int usb_autoresume_device(struct usb_device *udev, int inc_busy_cnt);
+extern void usb_autosuspend_device(struct usb_device *udev);
+extern int usb_autoresume_device(struct usb_device *udev);
 
 #else
 
-#define usb_autosuspend_device(udev, dec_busy_cnt)      do {} while (0)
-static inline int usb_autoresume_device(struct usb_device *udev,
-                int inc_busy_cnt)
+#define usb_autosuspend_device(udev)    do {} while (0)
+static inline int usb_autoresume_device(struct usb_device *udev)
 {
         return 0;
 }
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 107119c5430..d15bf22b9a0 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1894,13 +1894,13 @@ static int eth_start_xmit (struct sk_buff *skb, struct net_device *net)
         if (!eth_is_promisc (dev)) {
                 u8              *dest = skb->data;
 
-                if (dest [0] & 0x01) {
+                if (is_multicast_ether_addr(dest)) {
                         u16     type;
 
                         /* ignores USB_CDC_PACKET_TYPE_MULTICAST and host
                          * SET_ETHERNET_MULTICAST_FILTERS requests
                          */
-                        if (memcmp (dest, net->broadcast, ETH_ALEN) == 0)
+                        if (is_broadcast_ether_addr(dest))
                                 type = USB_CDC_PACKET_TYPE_BROADCAST;
                         else
                                 type = USB_CDC_PACKET_TYPE_ALL_MULTICAST;
diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c
index 179259664c1..4a991564a03 100644
--- a/drivers/usb/gadget/lh7a40x_udc.c
+++ b/drivers/usb/gadget/lh7a40x_udc.c
@@ -83,7 +83,6 @@ static int lh7a40x_queue(struct usb_ep *ep, struct usb_request *, gfp_t);
 static int lh7a40x_dequeue(struct usb_ep *ep, struct usb_request *);
 static int lh7a40x_set_halt(struct usb_ep *ep, int);
 static int lh7a40x_fifo_status(struct usb_ep *ep);
-static int lh7a40x_fifo_status(struct usb_ep *ep);
 static void lh7a40x_fifo_flush(struct usb_ep *ep);
 static void lh7a40x_ep0_kick(struct lh7a40x_udc *dev, struct lh7a40x_ep *ep);
 static void lh7a40x_handle_ep0(struct lh7a40x_udc *dev, u32 intr);
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index 3acc896a5d4..0b590831582 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -1040,6 +1040,7 @@ net2280_queue (struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 
         } /* else the irq handler advances the queue. */
 
+        ep->responded = 1;
         if (req)
                 list_add_tail (&req->queue, &ep->queue);
 done:
@@ -2188,7 +2189,8 @@ static void handle_ep_small (struct net2280_ep *ep)
                                         ep->stopped = 1;
                                         set_halt (ep);
                                         mode = 2;
-                                } else if (!req && !ep->stopped)
+                                } else if (ep->responded &&
+                                                !req && !ep->stopped)
                                         write_fifo (ep, NULL);
                         }
                 } else {
@@ -2203,7 +2205,7 @@ static void handle_ep_small (struct net2280_ep *ep)
                         } else if (((t & (1 << DATA_OUT_PING_TOKEN_INTERRUPT))
                                         && req
                                         && req->req.actual == req->req.length)
-                                        || !req) {
+                                        || (ep->responded && !req)) {
                                 ep->dev->protocol_stall = 1;
                                 set_halt (ep);
                                 ep->stopped = 1;
@@ -2469,6 +2471,7 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat)
                 /* we made the hardware handle most lowlevel requests;
                  * everything else goes uplevel to the gadget code.
                  */
+                ep->responded = 1;
                 switch (u.r.bRequest) {
                 case USB_REQ_GET_STATUS: {
                         struct net2280_ep       *e;
@@ -2537,6 +2540,7 @@ delegate:
                                 u.r.bRequestType, u.r.bRequest,
                                 w_value, w_index, w_length,
                                 readl (&ep->regs->ep_cfg));
+                        ep->responded = 0;
                         spin_unlock (&dev->lock);
                         tmp = dev->driver->setup (&dev->gadget, &u.r);
                         spin_lock (&dev->lock);
diff --git a/drivers/usb/gadget/net2280.h b/drivers/usb/gadget/net2280.h
index 957d6df3401..44ca139983d 100644
--- a/drivers/usb/gadget/net2280.h
+++ b/drivers/usb/gadget/net2280.h
@@ -110,7 +110,8 @@ struct net2280_ep {
                                                 out_overflow : 1,
                                                 stopped : 1,
                                                 is_in : 1,
-                                                is_iso : 1;
+                                                is_iso : 1,
+                                                responded : 1;
 };
 
 static inline void allow_status (struct net2280_ep *ep)
diff --git a/drivers/usb/gadget/pxa2xx_udc.c b/drivers/usb/gadget/pxa2xx_udc.c
index 671c24bc6d7..1ed506e9598 100644
--- a/drivers/usb/gadget/pxa2xx_udc.c
+++ b/drivers/usb/gadget/pxa2xx_udc.c
@@ -2472,6 +2472,7 @@ static struct pxa2xx_udc memory = {
 #define PXA210_B1               0x00000123
 #define PXA210_B0               0x00000122
 #define IXP425_A0               0x000001c1
+#define IXP425_B0               0x000001f1
 #define IXP465_AD               0x00000200
 
 /*
@@ -2509,6 +2510,7 @@ static int __init pxa2xx_udc_probe(struct platform_device *pdev)
                 break;
 #elif   defined(CONFIG_ARCH_IXP4XX)
         case IXP425_A0:
+        case IXP425_B0:
         case IXP465_AD:
                 dev->has_cfr = 1;
                 out_dma = 0;
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index cf10cbc98f8..cc60759083b 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -153,7 +153,7 @@ config USB_U132_HCD
           adapter will *NOT* work with PC cards that do not contain an OHCI
           controller.
 
-          For those PC cards that contain multiple OHCI controllers only ther
+          For those PC cards that contain multiple OHCI controllers only the
           first one is used.
 
           The driver consists of two modules, the "ftdi-elan" module is a
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 9030994aba9..025d3331368 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -126,6 +126,11 @@ static unsigned park = 0;
 module_param (park, uint, S_IRUGO);
 MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
 
+/* for flakey hardware, ignore overcurrent indicators */
+static int ignore_oc = 0;
+module_param (ignore_oc, bool, S_IRUGO);
+MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
+
 #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
 
 /*-------------------------------------------------------------------------*/
@@ -541,9 +546,10 @@ static int ehci_run (struct usb_hcd *hcd)
 
         temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
         ehci_info (ehci,
-                "USB %x.%x started, EHCI %x.%02x, driver %s\n",
+                "USB %x.%x started, EHCI %x.%02x, driver %s%s\n",
                 ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
-                temp >> 8, temp & 0xff, DRIVER_VERSION);
+                temp >> 8, temp & 0xff, DRIVER_VERSION,
+                ignore_oc ? ", overcurrent ignored" : "");
 
         writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */
 
@@ -613,9 +619,8 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
                 unsigned        i = HCS_N_PORTS (ehci->hcs_params);
 
                 /* resume root hub? */
-                status = readl (&ehci->regs->command);
-                if (!(status & CMD_RUN))
-                        writel (status | CMD_RUN, &ehci->regs->command);
+                if (!(readl(&ehci->regs->command) & CMD_RUN))
+                        usb_hcd_resume_root_hub(hcd);
 
                 while (i--) {
                         int pstatus = readl (&ehci->regs->port_status [i]);
@@ -632,7 +637,6 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd)
                          */
                         ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
                         ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
-                        usb_hcd_resume_root_hub(hcd);
                 }
         }
 
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 1b20722c102..bfe5f307cba 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -34,6 +34,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
         int                     port;
+        int                     mask;
 
         if (time_before (jiffies, ehci->next_statechange))
                 msleep(5);
@@ -51,14 +52,25 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
                 ehci->reclaim_ready = 1;
         ehci_work(ehci);
 
-        /* suspend any active/unsuspended ports, maybe allow wakeup */
+        /* Unlike other USB host controller types, EHCI doesn't have
+         * any notion of "global" or bus-wide suspend.  The driver has
+         * to manually suspend all the active unsuspended ports, and
+         * then manually resume them in the bus_resume() routine.
+         */
+        ehci->bus_suspended = 0;
         while (port--) {
                 u32 __iomem     *reg = &ehci->regs->port_status [port];
                 u32             t1 = readl (reg) & ~PORT_RWC_BITS;
                 u32             t2 = t1;
 
-                if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
+                /* keep track of which ports we suspend */
+                if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) &&
+                                !(t1 & PORT_SUSPEND)) {
                         t2 |= PORT_SUSPEND;
+                        set_bit(port, &ehci->bus_suspended);
+                }
+
+                /* enable remote wakeup on all ports */
                 if (device_may_wakeup(&hcd->self.root_hub->dev))
                         t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
                 else
@@ -76,6 +88,13 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
         ehci_halt (ehci);
         hcd->state = HC_STATE_SUSPENDED;
 
+        /* allow remote wakeup */
+        mask = INTR_MASK;
+        if (!device_may_wakeup(&hcd->self.root_hub->dev))
+                mask &= ~STS_PCD;
+        writel(mask, &ehci->regs->intr_enable);
+        readl(&ehci->regs->intr_enable);
+
         ehci->next_statechange = jiffies + msecs_to_jiffies(10);
         spin_unlock_irq (&ehci->lock);
         return 0;
@@ -88,7 +107,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
         struct ehci_hcd         *ehci = hcd_to_ehci (hcd);
         u32                     temp;
         int                     i;
-        int                     intr_enable;
 
         if (time_before (jiffies, ehci->next_statechange))
                 msleep(5);
@@ -100,31 +118,30 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
          * the last user of the controller, not reset/pm hardware keeping
          * state we gave to it.
          */
+        temp = readl(&ehci->regs->intr_enable);
+        ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss");
 
-        /* re-init operational registers in case we lost power */
-        if (readl (&ehci->regs->intr_enable) == 0) {
-                /* at least some APM implementations will try to deliver
-                 * IRQs right away, so delay them until we're ready.
-                 */
-                intr_enable = 1;
-                writel (0, &ehci->regs->segment);
-                writel (ehci->periodic_dma, &ehci->regs->frame_list);
-                writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
-        } else
-                intr_enable = 0;
-        ehci_dbg(ehci, "resume root hub%s\n",
-                        intr_enable ? " after power loss" : "");
+        /* at least some APM implementations will try to deliver
+         * IRQs right away, so delay them until we're ready.
+         */
+        writel(0, &ehci->regs->intr_enable);
+
+        /* re-init operational registers */
+        writel(0, &ehci->regs->segment);
+        writel(ehci->periodic_dma, &ehci->regs->frame_list);
+        writel((u32) ehci->async->qh_dma, &ehci->regs->async_next);
 
         /* restore CMD_RUN, framelist size, and irq threshold */
         writel (ehci->command, &ehci->regs->command);
 
-        /* take ports out of suspend */
+        /* manually resume the ports we suspended during bus_suspend() */
         i = HCS_N_PORTS (ehci->hcs_params);
         while (i--) {
                 temp = readl (&ehci->regs->port_status [i]);
                 temp &= ~(PORT_RWC_BITS
                         | PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
-                if (temp & PORT_SUSPEND) {
+                if (test_bit(i, &ehci->bus_suspended) &&
+                                (temp & PORT_SUSPEND)) {
                         ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
                         temp |= PORT_RESUME;
                 }
@@ -134,11 +151,12 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
         mdelay (20);
         while (i--) {
                 temp = readl (&ehci->regs->port_status [i]);
-                if ((temp & PORT_SUSPEND) == 0)
-                        continue;
-                temp &= ~(PORT_RWC_BITS | PORT_RESUME);
-                writel (temp, &ehci->regs->port_status [i]);
-                ehci_vdbg (ehci, "resumed port %d\n", i + 1);
+                if (test_bit(i, &ehci->bus_suspended) &&
+                                (temp & PORT_SUSPEND)) {
+                        temp &= ~(PORT_RWC_BITS | PORT_RESUME);
+                        writel (temp, &ehci->regs->port_status [i]);
+                        ehci_vdbg (ehci, "resumed port %d\n", i + 1);
+                }
         }
         (void) readl (&ehci->regs->command);
 
@@ -157,8 +175,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
         hcd->state = HC_STATE_RUNNING;
 
         /* Now we can safely re-enable irqs */
-        if (intr_enable)
-                writel (INTR_MASK, &ehci->regs->intr_enable);
+        writel(INTR_MASK, &ehci->regs->intr_enable);
 
         spin_unlock_irq (&ehci->lock);
         return 0;
@@ -218,6 +235,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
         struct ehci_hcd *ehci = hcd_to_ehci (hcd);
         u32             temp, status = 0;
+        u32             mask;
         int             ports, i, retval = 1;
         unsigned long   flags;
 
@@ -233,6 +251,18 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
                 retval++;
         }
 
+        /* Some boards (mostly VIA?) report bogus overcurrent indications,
+         * causing massive log spam unless we completely ignore them.  It
+         * may be relevant that VIA VT8235 controlers, where PORT_POWER is
+         * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+         * PORT_POWER; that's surprising, but maybe within-spec.
+         */
+        if (!ignore_oc)
+                mask = PORT_CSC | PORT_PEC | PORT_OCC;
+        else
+                mask = PORT_CSC | PORT_PEC;
+        // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
+
         /* no hub change reports (bit 0) for now (power, ...) */
 
         /* port N changes (bit N)? */
@@ -250,8 +280,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
                 }
                 if (!(temp & PORT_CONNECT))
                         ehci->reset_done [i] = 0;
-                if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0
-                                // PORT_STAT_C_SUSPEND?
+                if ((temp & mask) != 0
                                 || ((temp & PORT_RESUME) != 0
                                         && time_after (jiffies,
                                                 ehci->reset_done [i]))) {
@@ -319,6 +348,7 @@ static int ehci_hub_control (
         u32             temp, status;
         unsigned long   flags;
         int             retval = 0;
+        unsigned        selector;
 
         /*
          * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
@@ -417,7 +447,7 @@ static int ehci_hub_control (
                         status |= 1 << USB_PORT_FEAT_C_CONNECTION;
                 if (temp & PORT_PEC)
                         status |= 1 << USB_PORT_FEAT_C_ENABLE;
-                if (temp & PORT_OCC)
+                if ((temp & PORT_OCC) && !ignore_oc)
                         status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
 
                 /* whoever resumes must GetPortStatus to complete it!! */
@@ -506,6 +536,8 @@ static int ehci_hub_control (
                 }
                 break;
         case SetPortFeature:
+                selector = wIndex >> 8;
+                wIndex &= 0xff;
                 if (!wIndex || wIndex > ports)
                         goto error;
                 wIndex--;
@@ -559,6 +591,22 @@ static int ehci_hub_control (
                         }
                         writel (temp, &ehci->regs->port_status [wIndex]);
                         break;
+
+                /* For downstream facing ports (these):  one hub port is put
+                 * into test mode according to USB2 11.24.2.13, then the hub
+                 * must be reset (which for root hub now means rmmod+modprobe,
+                 * or else system reboot).  See EHCI 2.3.9 and 4.14 for info
+                 * about the EHCI-specific stuff.
+                 */
+                case USB_PORT_FEAT_TEST:
+                        if (!selector || selector > 5)
+                                goto error;
+                        ehci_quiesce(ehci);
+                        ehci_halt(ehci);
+                        temp |= selector << 16;
+                        writel (temp, &ehci->regs->port_status [wIndex]);
+                        break;
+
                 default:
                         goto error;
                 }
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index e51c1ed81ac..4bc7970ba3e 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -257,9 +257,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 static int ehci_pci_resume(struct usb_hcd *hcd)
 {
         struct ehci_hcd         *ehci = hcd_to_ehci(hcd);
-        unsigned                port;
         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
-        int                     retval = -EINVAL;
 
         // maybe restore FLADJ
 
@@ -269,27 +267,19 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
         /* Mark hardware accessible again as we are out of D3 state by now */
         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
-        /* If CF is clear, we lost PCI Vaux power and need to restart.  */
-        if (readl(&ehci->regs->configured_flag) != FLAG_CF)
-                goto restart;
-
-        /* If any port is suspended (or owned by the companion),
-         * we know we can/must resume the HC (and mustn't reset it).
-         * We just defer that to the root hub code.
+        /* If CF is still set, we maintained PCI Vaux power.
+         * Just undo the effect of ehci_pci_suspend().
          */
-        for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
-                u32     status;
-                port--;
-                status = readl(&ehci->regs->port_status [port]);
-                if (!(status & PORT_POWER))
-                        continue;
-                if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) {
-                        usb_hcd_resume_root_hub(hcd);
-                        return 0;
-                }
+        if (readl(&ehci->regs->configured_flag) == FLAG_CF) {
+                int     mask = INTR_MASK;
+
+                if (!device_may_wakeup(&hcd->self.root_hub->dev))
+                        mask &= ~STS_PCD;
+                writel(mask, &ehci->regs->intr_enable);
+                readl(&ehci->regs->intr_enable);
+                return 0;
         }
 
-restart:
         ehci_dbg(ehci, "lost power, restarting\n");
         usb_root_hub_lost_power(hcd->self.root_hub);
 
@@ -307,13 +297,15 @@ restart:
         ehci_work(ehci);
         spin_unlock_irq(&ehci->lock);
 
-        /* restart; khubd will disconnect devices */
-        retval = ehci_run(hcd);
-
         /* here we "know" root ports should always stay powered */
         ehci_port_power(ehci, 1);
 
-        return retval;
+        writel(ehci->command, &ehci->regs->command);
+        writel(FLAG_CF, &ehci->regs->configured_flag);
+        readl(&ehci->regs->command);    /* unblock posted writes */
+
+        hcd->state = HC_STATE_SUSPENDED;
+        return 0;
 }
 #endif
 
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bbc3082a73d..74dbc6c8228 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -74,6 +74,7 @@ struct ehci_hcd {			/* one per controller */
 
         /* per root hub port */
         unsigned long           reset_done [EHCI_MAX_ROOT_PORTS];
+        unsigned long           bus_suspended;
 
         /* per-HC memory pools (could be per-bus, but ...) */
         struct dma_pool         *qh_pool;       /* qh per active urb */
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index ea4714e557e..a95275a401b 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -729,6 +729,16 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
                 ohci->next_statechange = jiffies + STATECHANGE_DELAY;
                 ohci_writel(ohci, OHCI_INTR_RD | OHCI_INTR_RHSC,
                                 &regs->intrstatus);
+
+                /* NOTE: Vendors didn't always make the same implementation
+                 * choices for RHSC.  Many followed the spec; RHSC triggers
+                 * on an edge, like setting and maybe clearing a port status
+                 * change bit.  With others it's level-triggered, active
+                 * until khubd clears all the port status change bits.  We'll
+                 * always disable it here and rely on polling until khubd
+                 * re-enables it.
+                 */
+                ohci_writel(ohci, OHCI_INTR_RHSC, &regs->intrdisable);
                 usb_hcd_poll_rh_status(hcd);
         }
 
diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c
index 6995ea36f2e..2441642cb7b 100644
--- a/drivers/usb/host/ohci-hub.c
+++ b/drivers/usb/host/ohci-hub.c
@@ -41,7 +41,11 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd)
 {
         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 
-        ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+        spin_lock_irq(&ohci->lock);
+        if (!ohci->autostop)
+                del_timer(&hcd->rh_timer);      /* Prevent next poll */
+        ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
+        spin_unlock_irq(&ohci->lock);
 }
 
 #define OHCI_SCHED_ENABLES \
@@ -50,6 +54,9 @@ static void ohci_rhsc_enable (struct usb_hcd *hcd)
 static void dl_done_list (struct ohci_hcd *);
 static void finish_unlinks (struct ohci_hcd *, u16);
 
+#ifdef  CONFIG_PM
+static int ohci_restart(struct ohci_hcd *ohci);
+
 static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
 __releases(ohci->lock)
 __acquires(ohci->lock)
@@ -132,8 +139,6 @@ static inline struct ed *find_head (struct ed *ed)
         return ed;
 }
 
-static int ohci_restart (struct ohci_hcd *ohci);
-
 /* caller has locked the root hub */
 static int ohci_rh_resume (struct ohci_hcd *ohci)
 __releases(ohci->lock)
@@ -169,7 +174,7 @@ __acquires(ohci->lock)
                 break;
         case OHCI_USB_RESUME:
                 /* HCFS changes sometime after INTR_RD */
-                ohci_info(ohci, "%swakeup\n",
+                ohci_dbg(ohci, "%swakeup root hub\n",
                                 autostopped ? "auto-" : "");
                 break;
         case OHCI_USB_OPER:
@@ -181,7 +186,6 @@ __acquires(ohci->lock)
                 ohci_dbg (ohci, "lost power\n");
                 status = -EBUSY;
         }
-#ifdef  CONFIG_PM
         if (status == -EBUSY) {
                 if (!autostopped) {
                         spin_unlock_irq (&ohci->lock);
@@ -191,25 +195,12 @@ __acquires(ohci->lock)
                 }
                 return status;
         }
-#endif
         if (status != -EINPROGRESS)
                 return status;
         if (autostopped)
                 goto skip_resume;
         spin_unlock_irq (&ohci->lock);
 
-        temp = ohci->num_ports;
-        while (temp--) {
-                u32 stat = ohci_readl (ohci,
-                                       &ohci->regs->roothub.portstatus [temp]);
-
-                /* force global, not selective, resume */
-                if (!(stat & RH_PS_PSS))
-                        continue;
-                ohci_writel (ohci, RH_PS_POCI,
-                                &ohci->regs->roothub.portstatus [temp]);
-        }
-
         /* Some controllers (lucent erratum) need extra-long delays */
         msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
 
@@ -217,6 +208,7 @@ __acquires(ohci->lock)
         temp &= OHCI_CTRL_HCFS;
         if (temp != OHCI_USB_RESUME) {
                 ohci_err (ohci, "controller won't resume\n");
+                spin_lock_irq(&ohci->lock);
                 return -EBUSY;
         }
 
@@ -296,8 +288,6 @@ skip_resume:
         return 0;
 }
 
-#ifdef  CONFIG_PM
-
 static int ohci_bus_suspend (struct usb_hcd *hcd)
 {
         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
@@ -335,6 +325,83 @@ static int ohci_bus_resume (struct usb_hcd *hcd)
         return rc;
 }
 
+/* Carry out polling-, autostop-, and autoresume-related state changes */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+                int any_connected)
+{
+        int     poll_rh = 1;
+
+        switch (ohci->hc_control & OHCI_CTRL_HCFS) {
+
+        case OHCI_USB_OPER:
+                /* keep on polling until we know a device is connected
+                 * and RHSC is enabled */
+                if (!ohci->autostop) {
+                        if (any_connected ||
+                                        !device_may_wakeup(&ohci_to_hcd(ohci)
+                                                ->self.root_hub->dev)) {
+                                if (ohci_readl(ohci, &ohci->regs->intrenable) &
+                                                OHCI_INTR_RHSC)
+                                        poll_rh = 0;
+                        } else {
+                                ohci->autostop = 1;
+                                ohci->next_statechange = jiffies + HZ;
+                        }
+
+                /* if no devices have been attached for one second, autostop */
+                } else {
+                        if (changed || any_connected) {
+                                ohci->autostop = 0;
+                                ohci->next_statechange = jiffies +
+                                                STATECHANGE_DELAY;
+                        } else if (time_after_eq(jiffies,
+                                                ohci->next_statechange)
+                                        && !ohci->ed_rm_list
+                                        && !(ohci->hc_control &
+                                                OHCI_SCHED_ENABLES)) {
+                                ohci_rh_suspend(ohci, 1);
+                        }
+                }
+                break;
+
+        /* if there is a port change, autostart or ask to be resumed */
+        case OHCI_USB_SUSPEND:
+        case OHCI_USB_RESUME:
+                if (changed) {
+                        if (ohci->autostop)
+                                ohci_rh_resume(ohci);
+                        else
+                                usb_hcd_resume_root_hub(ohci_to_hcd(ohci));
+                } else {
+                        /* everything is idle, no need for polling */
+                        poll_rh = 0;
+                }
+                break;
+        }
+        return poll_rh;
+}
+
+#else   /* CONFIG_PM */
+
+static inline int ohci_rh_resume(struct ohci_hcd *ohci)
+{
+        return 0;
+}
+
+/* Carry out polling-related state changes.
+ * autostop isn't used when CONFIG_PM is turned off.
+ */
+static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
+                int any_connected)
+{
+        int     poll_rh = 1;
+
+        /* keep on polling until RHSC is enabled */
+        if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
+                poll_rh = 0;
+        return poll_rh;
+}
+
 #endif  /* CONFIG_PM */
 
 /*-------------------------------------------------------------------------*/
@@ -346,7 +413,7 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
 {
         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
         int             i, changed = 0, length = 1;
-        int             any_connected = 0, rhsc_enabled = 1;
+        int             any_connected = 0;
         unsigned long   flags;
 
         spin_lock_irqsave (&ohci->lock, flags);
@@ -387,67 +454,8 @@ ohci_hub_status_data (struct usb_hcd *hcd, char *buf)
                 }
         }
 
-        /* NOTE:  vendors didn't always make the same implementation
-         * choices for RHSC.  Sometimes it triggers on an edge (like
-         * setting and maybe clearing a port status change bit); and
-         * it's level-triggered on other silicon, active until khubd
-         * clears all active port status change bits.  If it's still
-         * set (level-triggered) we must disable it and rely on
-         * polling until khubd re-enables it.
-         */
-        if (ohci_readl (ohci, &ohci->regs->intrstatus) & OHCI_INTR_RHSC) {
-                ohci_writel (ohci, OHCI_INTR_RHSC, &ohci->regs->intrdisable);
-                (void) ohci_readl (ohci, &ohci->regs->intrdisable);
-                rhsc_enabled = 0;
-        }
-        hcd->poll_rh = 1;
-
-        /* carry out appropriate state changes */
-        switch (ohci->hc_control & OHCI_CTRL_HCFS) {
-
-        case OHCI_USB_OPER:
-                /* keep on polling until we know a device is connected
-                 * and RHSC is enabled */
-                if (!ohci->autostop) {
-                        if (any_connected) {
-                                if (rhsc_enabled)
-                                        hcd->poll_rh = 0;
-                        } else {
-                                ohci->autostop = 1;
-                                ohci->next_statechange = jiffies + HZ;
-                        }
-
-                /* if no devices have been attached for one second, autostop */
-                } else {
-                        if (changed || any_connected) {
-                                ohci->autostop = 0;
-                                ohci->next_statechange = jiffies +
-                                                STATECHANGE_DELAY;
-                        } else if (device_may_wakeup(&hcd->self.root_hub->dev)
-                                        && time_after_eq(jiffies,
-                                                ohci->next_statechange)
-                                        && !ohci->ed_rm_list
-                                        && !(ohci->hc_control &
-                                                OHCI_SCHED_ENABLES)) {
-                                ohci_rh_suspend (ohci, 1);
-                        }
-                }
-                break;
-
-        /* if there is a port change, autostart or ask to be resumed */
-        case OHCI_USB_SUSPEND:
-        case OHCI_USB_RESUME:
-                if (changed) {
-                        if (ohci->autostop)
-                                ohci_rh_resume (ohci);
-                        else
-                                usb_hcd_resume_root_hub (hcd);
-                } else {
-                        /* everything is idle, no need for polling */
-                        hcd->poll_rh = 0;
-                }
-                break;
-        }
+        hcd->poll_rh = ohci_root_hub_state_changes(ohci, changed,
+                        any_connected);
 
 done:
         spin_unlock_irqrestore (&ohci->lock, flags);
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 4f95a249c91..a9d7119e317 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -71,7 +71,7 @@ static int distrust_firmware = 1;
 module_param(distrust_firmware, bool, 0);
 MODULE_PARM_DESC(distrust_firmware, "true to distrust firmware power/overcurren"
         "t setup");
-DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
+static DECLARE_WAIT_QUEUE_HEAD(u132_hcd_wait);
 /*
 * u132_module_lock exists to protect access to global variables
 *
@@ -205,13 +205,9 @@ struct u132 {
         struct u132_port port[MAX_U132_PORTS];
         struct u132_endp *endp[MAX_U132_ENDPS];
 };
-int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data);
-int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, u8 addressofs,
-        u8 width, u32 *data);
-int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, u8 addressofs,
-        u8 width, u32 data);
+
 /*
-* these can not be inlines because we need the structure offset!!
+* these cannot be inlines because we need the structure offset!!
 * Does anyone have a better way?????
 */
 #define u132_read_pcimem(u132, member, data) \
@@ -3031,7 +3027,7 @@ static struct hc_driver u132_hc_driver = {
 * This function may be called by the USB core whilst the "usb_all_devices_rwsem"
 * is held for writing, thus this module must not call usb_remove_hcd()
 * synchronously - but instead should immediately stop activity to the
-* device and ansynchronously call usb_remove_hcd()
+* device and asynchronously call usb_remove_hcd()
 */
 static int __devexit u132_remove(struct platform_device *pdev)
 {
@@ -3227,7 +3223,7 @@ static int u132_resume(struct platform_device *pdev)
 #define u132_resume NULL
 #endif
 /*
-* this driver is loaded explicitely by ftdi_u132
+* this driver is loaded explicitly by ftdi_u132
 *
 * the platform_driver struct is static because it is per type of module
 */
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index 3038ed0700d..8ccddf74534 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -796,7 +796,7 @@ static int mts_usb_probe(struct usb_interface *intf,
 
         new_desc->context.scsi_status = kmalloc(1, GFP_KERNEL);
         if (!new_desc->context.scsi_status)
-                goto out_kfree2;
+                goto out_free_urb;
 
         new_desc->usb_dev = dev;
         new_desc->usb_intf = intf;
@@ -822,18 +822,20 @@ static int mts_usb_probe(struct usb_interface *intf,
         new_desc->host = scsi_host_alloc(&mts_scsi_host_template,
                         sizeof(new_desc));
         if (!new_desc->host)
-                goto out_free_urb;
+                goto out_kfree2;
 
         new_desc->host->hostdata[0] = (unsigned long)new_desc;
         if (scsi_add_host(new_desc->host, NULL)) {
                 err_retval = -EIO;
-                goto out_free_urb;
+                goto out_host_put;
         }
         scsi_scan_host(new_desc->host);
 
         usb_set_intfdata(intf, new_desc);
         return 0;
 
+ out_host_put:
+        scsi_host_put(new_desc->host);
  out_kfree2:
         kfree(new_desc->context.scsi_status);
  out_free_urb:
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 20db36448ab..661af7aa623 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -221,6 +221,7 @@ config USB_TOUCHSCREEN
           - ITM
           - some other eTurboTouch
           - Gunze AHL61
+          - DMC TSC-10/25
 
           Have a look at <http://linux.chapter7.ch/touchkit/> for
           a usage description and the required user-space stuff.
@@ -258,6 +259,11 @@ config USB_TOUCHSCREEN_GUNZE
         bool "Gunze AHL61 device support" if EMBEDDED
         depends on USB_TOUCHSCREEN
 
+config USB_TOUCHSCREEN_DMC_TSC10
+        default y
+        bool "DMC TSC-10/25 device support" if EMBEDDED
+        depends on USB_TOUCHSCREEN
+
 config USB_YEALINK
         tristate "Yealink usb-p1k voip phone"
         depends on USB && INPUT && EXPERIMENTAL
diff --git a/drivers/usb/input/ati_remote.c b/drivers/usb/input/ati_remote.c
index f659f3028ad..ff23318dc30 100644
--- a/drivers/usb/input/ati_remote.c
+++ b/drivers/usb/input/ati_remote.c
@@ -630,19 +630,14 @@ static int ati_remote_alloc_buffers(struct usb_device *udev,
  */
 static void ati_remote_free_buffers(struct ati_remote *ati_remote)
 {
-        if (ati_remote->irq_urb)
-                usb_free_urb(ati_remote->irq_urb);
+        usb_free_urb(ati_remote->irq_urb);
+        usb_free_urb(ati_remote->out_urb);
 
-        if (ati_remote->out_urb)
-                usb_free_urb(ati_remote->out_urb);
+        usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
+                ati_remote->inbuf, ati_remote->inbuf_dma);
 
-        if (ati_remote->inbuf)
-                usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
-                                ati_remote->inbuf, ati_remote->inbuf_dma);
-
-        if (ati_remote->outbuf)
-                usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
-                                ati_remote->inbuf, ati_remote->outbuf_dma);
+        usb_buffer_free(ati_remote->udev, DATA_BUFSIZE,
+                ati_remote->outbuf, ati_remote->outbuf_dma);
 }
 
 static void ati_remote_input_init(struct ati_remote *ati_remote)
diff --git a/drivers/usb/input/ati_remote2.c b/drivers/usb/input/ati_remote2.c
index f982a2b4a7f..83f1f79db7c 100644
--- a/drivers/usb/input/ati_remote2.c
+++ b/drivers/usb/input/ati_remote2.c
@@ -372,8 +372,7 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2)
         int i;
 
         for (i = 0; i < 2; i++) {
-                if (ar2->urb[i])
-                        usb_free_urb(ar2->urb[i]);
+                usb_free_urb(ar2->urb[i]);
 
                 if (ar2->buf[i])
                         usb_buffer_free(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]);
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index ebc9e823a46..4295bab4f1e 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -968,21 +968,30 @@ static void hid_retry_timeout(unsigned long _hid)
                 hid_io_error(hid);
 }
 
-/* Workqueue routine to reset the device */
+/* Workqueue routine to reset the device or clear a halt */
 static void hid_reset(struct work_struct *work)
 {
         struct hid_device *hid =
                 container_of(work, struct hid_device, reset_work);
-        int rc_lock, rc;
-
-        dev_dbg(&hid->intf->dev, "resetting device\n");
-        rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf);
-        if (rc_lock >= 0) {
-                rc = usb_reset_composite_device(hid->dev, hid->intf);
-                if (rc_lock)
-                        usb_unlock_device(hid->dev);
+        int rc_lock, rc = 0;
+
+        if (test_bit(HID_CLEAR_HALT, &hid->iofl)) {
+                dev_dbg(&hid->intf->dev, "clear halt\n");
+                rc = usb_clear_halt(hid->dev, hid->urbin->pipe);
+                clear_bit(HID_CLEAR_HALT, &hid->iofl);
+                hid_start_in(hid);
+        }
+
+        else if (test_bit(HID_RESET_PENDING, &hid->iofl)) {
+                dev_dbg(&hid->intf->dev, "resetting device\n");
+                rc = rc_lock = usb_lock_device_for_reset(hid->dev, hid->intf);
+                if (rc_lock >= 0) {
+                        rc = usb_reset_composite_device(hid->dev, hid->intf);
+                        if (rc_lock)
+                                usb_unlock_device(hid->dev);
+                }
+                clear_bit(HID_RESET_PENDING, &hid->iofl);
         }
-        clear_bit(HID_RESET_PENDING, &hid->iofl);
 
         switch (rc) {
         case 0:
@@ -1024,9 +1033,8 @@ static void hid_io_error(struct hid_device *hid)
 
                 /* Retries failed, so do a port reset */
                 if (!test_and_set_bit(HID_RESET_PENDING, &hid->iofl)) {
-                        if (schedule_work(&hid->reset_work))
-                                goto done;
-                        clear_bit(HID_RESET_PENDING, &hid->iofl);
+                        schedule_work(&hid->reset_work);
+                        goto done;
                 }
         }
 
@@ -1050,6 +1058,11 @@ static void hid_irq_in(struct urb *urb)
                         hid->retry_delay = 0;
                         hid_input_report(HID_INPUT_REPORT, urb, 1);
                         break;
+                case -EPIPE:            /* stall */
+                        clear_bit(HID_IN_RUNNING, &hid->iofl);
+                        set_bit(HID_CLEAR_HALT, &hid->iofl);
+                        schedule_work(&hid->reset_work);
+                        return;
                 case -ECONNRESET:       /* unlink */
                 case -ENOENT:
                 case -ESHUTDOWN:        /* unplug */
@@ -1628,6 +1641,19 @@ void hid_init_reports(struct hid_device *hid)
 
 #define USB_VENDOR_ID_APPLE             0x05ac
 #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304
+#define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI       0x020e
+#define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO        0x020f
+#define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214
+#define USB_DEVICE_ID_APPLE_GEYSER_ISO  0x0215
+#define USB_DEVICE_ID_APPLE_GEYSER_JIS  0x0216
+#define USB_DEVICE_ID_APPLE_GEYSER3_ANSI        0x0217
+#define USB_DEVICE_ID_APPLE_GEYSER3_ISO 0x0218
+#define USB_DEVICE_ID_APPLE_GEYSER3_JIS 0x0219
+#define USB_DEVICE_ID_APPLE_GEYSER4_ANSI        0x021a
+#define USB_DEVICE_ID_APPLE_GEYSER4_ISO 0x021b
+#define USB_DEVICE_ID_APPLE_GEYSER4_JIS 0x021c
+#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY    0x030a
+#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY     0x030b
 
 #define USB_VENDOR_ID_CHERRY            0x046a
 #define USB_DEVICE_ID_CHERRY_CYMOTION   0x0023
@@ -1795,17 +1821,19 @@ static const struct hid_blacklist {
 
         { USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION },
 
-        { USB_VENDOR_ID_APPLE, 0x020E, HID_QUIRK_POWERBOOK_HAS_FN },
-        { USB_VENDOR_ID_APPLE, 0x020F, HID_QUIRK_POWERBOOK_HAS_FN },
-        { USB_VENDOR_ID_APPLE, 0x0214, HID_QUIRK_POWERBOOK_HAS_FN },
-        { USB_VENDOR_ID_APPLE, 0x0215, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
-        { USB_VENDOR_ID_APPLE, 0x0216, HID_QUIRK_POWERBOOK_HAS_FN },
-        { USB_VENDOR_ID_APPLE, 0x0217, HID_QUIRK_POWERBOOK_HAS_FN },
-        { USB_VENDOR_ID_APPLE, 0x0218, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
-        { USB_VENDOR_ID_APPLE, 0x0219, HID_QUIRK_POWERBOOK_HAS_FN },
-        { USB_VENDOR_ID_APPLE, 0x021B, HID_QUIRK_POWERBOOK_HAS_FN },
-        { USB_VENDOR_ID_APPLE, 0x030A, HID_QUIRK_POWERBOOK_HAS_FN },
-        { USB_VENDOR_ID_APPLE, 0x030B, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
+        { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
 
         { USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE },
         { USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
@@ -1986,7 +2014,7 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
                 if (hid->collection->usage == HID_GD_MOUSE && hid_mousepoll_interval > 0)
                         interval = hid_mousepoll_interval;
 
-                if (endpoint->bEndpointAddress & USB_DIR_IN) {
+                if (usb_endpoint_dir_in(endpoint)) {
                         if (hid->urbin)
                                 continue;
                         if (!(hid->urbin = usb_alloc_urb(0, GFP_KERNEL)))
@@ -2068,13 +2096,9 @@ static struct hid_device *usb_hid_configure(struct usb_interface *intf)
         return hid;
 
 fail:
-
-        if (hid->urbin)
-                usb_free_urb(hid->urbin);
-        if (hid->urbout)
-                usb_free_urb(hid->urbout);
-        if (hid->urbctrl)
-                usb_free_urb(hid->urbctrl);
+        usb_free_urb(hid->urbin);
+        usb_free_urb(hid->urbout);
+        usb_free_urb(hid->urbctrl);
         hid_free_buffers(dev, hid);
         hid_free_device(hid);
 
@@ -2105,8 +2129,7 @@ static void hid_disconnect(struct usb_interface *intf)
 
         usb_free_urb(hid->urbin);
         usb_free_urb(hid->urbctrl);
-        if (hid->urbout)
-                usb_free_urb(hid->urbout);
+        usb_free_urb(hid->urbout);
 
         hid_free_buffers(hid->dev, hid);
         hid_free_device(hid);
diff --git a/drivers/usb/input/hid.h b/drivers/usb/input/hid.h
index 0e76e6dcac3..2a9bf07944c 100644
--- a/drivers/usb/input/hid.h
+++ b/drivers/usb/input/hid.h
@@ -385,6 +385,7 @@ struct hid_control_fifo {
 #define HID_IN_RUNNING          3
 #define HID_RESET_PENDING       4
 #define HID_SUSPENDED           5
+#define HID_CLEAR_HALT          6
 
 struct hid_input {
         struct list_head list;
diff --git a/drivers/usb/input/usbkbd.c b/drivers/usb/input/usbkbd.c
index c73285cf855..dac88640eab 100644
--- a/drivers/usb/input/usbkbd.c
+++ b/drivers/usb/input/usbkbd.c
@@ -208,10 +208,8 @@ static int usb_kbd_alloc_mem(struct usb_device *dev, struct usb_kbd *kbd)
 
 static void usb_kbd_free_mem(struct usb_device *dev, struct usb_kbd *kbd)
 {
-        if (kbd->irq)
-                usb_free_urb(kbd->irq);
-        if (kbd->led)
-                usb_free_urb(kbd->led);
+        usb_free_urb(kbd->irq);
+        usb_free_urb(kbd->led);
         if (kbd->new)
                 usb_buffer_free(dev, 8, kbd->new, kbd->new_dma);
         if (kbd->cr)
@@ -236,9 +234,7 @@ static int usb_kbd_probe(struct usb_interface *iface,
                 return -ENODEV;
 
         endpoint = &interface->endpoint[0].desc;
-        if (!(endpoint->bEndpointAddress & USB_DIR_IN))
-                return -ENODEV;
-        if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
+        if (!usb_endpoint_is_int_in(endpoint))
                 return -ENODEV;
 
         pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
diff --git a/drivers/usb/input/usbmouse.c b/drivers/usb/input/usbmouse.c
index cbbbea332ed..68a55642c08 100644
--- a/drivers/usb/input/usbmouse.c
+++ b/drivers/usb/input/usbmouse.c
@@ -126,9 +126,7 @@ static int usb_mouse_probe(struct usb_interface *intf, const struct usb_device_i
                 return -ENODEV;
 
         endpoint = &interface->endpoint[0].desc;
-        if (!(endpoint->bEndpointAddress & USB_DIR_IN))
-                return -ENODEV;
-        if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
+        if (!usb_endpoint_is_int_in(endpoint))
                 return -ENODEV;
 
         pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress);
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index 933ceddf3de..49704d4ed0e 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -8,6 +8,7 @@
  *  - PanJit TouchSet
  *  - eTurboTouch
  *  - Gunze AHL61
+ *  - DMC TSC-10/25
  *
  * Copyright (C) 2004-2006 by Daniel Ritz <daniel.ritz@gmx.ch>
  * Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -30,6 +31,8 @@
  * - ITM parts are from itmtouch.c
  * - 3M parts are from mtouchusb.c
  * - PanJit parts are from an unmerged driver by Lanslott Gish
+ * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
+ *   driver from Marius Vollmer
  *
  *****************************************************************************/
 
@@ -44,7 +47,7 @@
 #include <linux/usb/input.h>
 
 
-#define DRIVER_VERSION          "v0.4"
+#define DRIVER_VERSION          "v0.5"
 #define DRIVER_AUTHOR           "Daniel Ritz <daniel.ritz@gmx.ch>"
 #define DRIVER_DESC             "USB Touchscreen Driver"
 
@@ -103,6 +106,7 @@ enum {
         DEVTYPE_ITM,
         DEVTYPE_ETURBO,
         DEVTYPE_GUNZE,
+        DEVTYPE_DMC_TSC10,
 };
 
 static struct usb_device_id usbtouch_devices[] = {
@@ -139,6 +143,10 @@ static struct usb_device_id usbtouch_devices[] = {
         {USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
 #endif
 
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+        {USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
+#endif
+
         {}
 };
 
@@ -313,6 +321,80 @@ static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *
 #endif
 
 /*****************************************************************************
+ * DMC TSC-10/25 Part
+ *
+ * Documentation about the controller and it's protocol can be found at
+ *   http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
+ *   http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
+ */
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+
+/* supported data rates. currently using 130 */
+#define TSC10_RATE_POINT        0x50
+#define TSC10_RATE_30           0x40
+#define TSC10_RATE_50           0x41
+#define TSC10_RATE_80           0x42
+#define TSC10_RATE_100          0x43
+#define TSC10_RATE_130          0x44
+#define TSC10_RATE_150          0x45
+
+/* commands */
+#define TSC10_CMD_RESET         0x55
+#define TSC10_CMD_RATE          0x05
+#define TSC10_CMD_DATA1         0x01
+
+static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
+{
+        struct usb_device *dev = usbtouch->udev;
+        int ret;
+        unsigned char buf[2];
+
+        /* reset */
+        buf[0] = buf[1] = 0xFF;
+        ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+                              TSC10_CMD_RESET,
+                              USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                              0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+        if (ret < 0)
+                return ret;
+        if (buf[0] != 0x06 || buf[1] != 0x00)
+                return -ENODEV;
+
+        /* set coordinate output rate */
+        buf[0] = buf[1] = 0xFF;
+        ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+                              TSC10_CMD_RATE,
+                              USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                              TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+        if (ret < 0)
+                return ret;
+        if (buf[0] != 0x06 || buf[1] != 0x00)
+                return -ENODEV;
+
+        /* start sending data */
+        ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+                              TSC10_CMD_DATA1,
+                              USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                              0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+        if (ret < 0)
+                return ret;
+
+        return 0;
+}
+
+
+static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+{
+        *x = ((pkt[2] & 0x03) << 8) | pkt[1];
+        *y = ((pkt[4] & 0x03) << 8) | pkt[3];
+        *touch = pkt[0] & 0x01;
+
+        return 1;
+}
+#endif
+
+
+/*****************************************************************************
  * the different device descriptors
  */
 static struct usbtouch_device_info usbtouch_dev_info[] = {
@@ -389,6 +471,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
                 .read_data      = gunze_read_data,
         },
 #endif
+
+#ifdef CONFIG_USB_TOUCHSCREEN_DMC_TSC10
+        [DEVTYPE_DMC_TSC10] = {
+                .min_xc         = 0x0,
+                .max_xc         = 0x03ff,
+                .min_yc         = 0x0,
+                .max_yc         = 0x03ff,
+                .rept_size      = 5,
+                .init           = dmc_tsc10_init,
+                .read_data      = dmc_tsc10_read_data,
+        },
+#endif
 };
 
 
diff --git a/drivers/usb/input/wacom.h b/drivers/usb/input/wacom.h
index 1cf08f02c50..d85abfc5ab5 100644
--- a/drivers/usb/input/wacom.h
+++ b/drivers/usb/input/wacom.h
@@ -110,7 +110,6 @@ struct wacom_combo {
 };
 
 extern int wacom_wac_irq(struct wacom_wac * wacom_wac, void * wcombo);
-extern void wacom_sys_irq(struct urb *urb);
 extern void wacom_report_abs(void *wcombo, unsigned int abs_type, int abs_data);
 extern void wacom_report_rel(void *wcombo, unsigned int rel_type, int rel_data);
 extern void wacom_report_key(void *wcombo, unsigned int key_type, int key_data);
diff --git a/drivers/usb/input/wacom_sys.c b/drivers/usb/input/wacom_sys.c
index 3498b893b53..e7cc20ab815 100644
--- a/drivers/usb/input/wacom_sys.c
+++ b/drivers/usb/input/wacom_sys.c
@@ -42,7 +42,7 @@ static struct input_dev * get_input_dev(struct wacom_combo *wcombo)
         return wcombo->wacom->dev;
 }
 
-void wacom_sys_irq(struct urb *urb)
+static void wacom_sys_irq(struct urb *urb)
 {
         struct wacom *wacom = urb->context;
         struct wacom_combo wcombo;
diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c
index 905bf639825..2268ca311ad 100644
--- a/drivers/usb/input/yealink.c
+++ b/drivers/usb/input/yealink.c
@@ -859,10 +859,8 @@ static int usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
 
         interface = intf->cur_altsetting;
         endpoint = &interface->endpoint[0].desc;
-        if (!(endpoint->bEndpointAddress & USB_DIR_IN))
-                return -EIO;
-        if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) != USB_ENDPOINT_XFER_INT)
-                return -EIO;
+        if (!usb_endpoint_is_int_in(endpoint))
+                return -ENODEV;
 
         yld = kzalloc(sizeof(struct yealink_dev), GFP_KERNEL);
         if (!yld)
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 11dc59540cd..2cba07d3197 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -4,6 +4,7 @@
 #
 
 obj-$(CONFIG_USB_ADUTUX)        += adutux.o
+obj-$(CONFIG_USB_APPLEDISPLAY)  += appledisplay.o
 obj-$(CONFIG_USB_AUERSWALD)     += auerswald.o
 obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
 obj-$(CONFIG_USB_CYTHERM)       += cytherm.o
diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c
index 6b23a1def9f..ba30ca6a14a 100644
--- a/drivers/usb/misc/appledisplay.c
+++ b/drivers/usb/misc/appledisplay.c
@@ -216,10 +216,7 @@ static int appledisplay_probe(struct usb_interface *iface,
         iface_desc = iface->cur_altsetting;
         for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
                 endpoint = &iface_desc->endpoint[i].desc;
-                if (!int_in_endpointAddr &&
-                    (endpoint->bEndpointAddress & USB_DIR_IN) &&
-                    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-                     USB_ENDPOINT_XFER_INT)) {
+                if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) {
                         /* we found an interrupt in endpoint */
                         int_in_endpointAddr = endpoint->bEndpointAddress;
                         break;
diff --git a/drivers/usb/misc/auerswald.c b/drivers/usb/misc/auerswald.c
index e4971d6aaaf..c703f73e165 100644
--- a/drivers/usb/misc/auerswald.c
+++ b/drivers/usb/misc/auerswald.c
@@ -704,9 +704,7 @@ static void auerbuf_free (pauerbuf_t bp)
 {
         kfree(bp->bufp);
         kfree(bp->dr);
-        if (bp->urbp) {
-                usb_free_urb(bp->urbp);
-        }
+        usb_free_urb(bp->urbp);
         kfree(bp);
 }
 
@@ -1155,8 +1153,7 @@ static void auerswald_int_release (pauerswald_t cp)
         dbg ("auerswald_int_release");
 
         /* stop the int endpoint */
-        if (cp->inturbp)
-                usb_kill_urb (cp->inturbp);
+        usb_kill_urb (cp->inturbp);
 
         /* deallocate memory */
         auerswald_int_free (cp);
diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c
index 1fd9cb85f4c..5c0a26cbd12 100644
--- a/drivers/usb/misc/emi26.c
+++ b/drivers/usb/misc/emi26.c
@@ -53,13 +53,12 @@ static void __exit emi26_exit (void);
 static int emi26_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request)
 {
         int result;
-        unsigned char *buffer =  kmalloc (length, GFP_KERNEL);
+        unsigned char *buffer =  kmemdup(data, length, GFP_KERNEL);
 
         if (!buffer) {
                 err("emi26: kmalloc(%d) failed.", length);
                 return -ENOMEM;
         }
-        memcpy (buffer, data, length);
         /* Note: usb_control_msg returns negative value on error or length of the
          *               data that was written! */
         result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index fe351371f27..23153eac0df 100644
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -61,13 +61,12 @@ static void __exit emi62_exit (void);
 static int emi62_writememory (struct usb_device *dev, int address, unsigned char *data, int length, __u8 request)
 {
         int result;
-        unsigned char *buffer =  kmalloc (length, GFP_KERNEL);
+        unsigned char *buffer =  kmemdup(data, length, GFP_KERNEL);
 
         if (!buffer) {
                 err("emi62: kmalloc(%d) failed.", length);
                 return -ENOMEM;
         }
-        memcpy (buffer, data, length);
         /* Note: usb_control_msg returns negative value on error or length of the
          *               data that was written! */
         result = usb_control_msg (dev, usb_sndctrlpipe(dev, 0), request, 0x40, address, 0, buffer, length, 300);
diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c
index e4e2cf2ba91..18b1925032a 100644
--- a/drivers/usb/misc/ftdi-elan.c
+++ b/drivers/usb/misc/ftdi-elan.c
@@ -272,7 +272,7 @@ void ftdi_elan_gone_away(struct platform_device *pdev)
 
 
 EXPORT_SYMBOL_GPL(ftdi_elan_gone_away);
-void ftdi_release_platform_dev(struct device *dev)
+static void ftdi_release_platform_dev(struct device *dev)
 {
         dev->parent = NULL;
 }
@@ -1399,14 +1399,6 @@ static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data)
         }
 }
 
-int usb_ftdi_elan_read_reg(struct platform_device *pdev, u32 *data)
-{
-        struct usb_ftdi *ftdi = platform_device_to_usb_ftdi(pdev);
-        return ftdi_elan_read_reg(ftdi, data);
-}
-
-
-EXPORT_SYMBOL_GPL(usb_ftdi_elan_read_reg);
 static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset,
         u8 width, u32 *data)
 {
@@ -2606,10 +2598,7 @@ static int ftdi_elan_probe(struct usb_interface *interface,
         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
                 endpoint = &iface_desc->endpoint[i].desc;
                 if (!ftdi->bulk_in_endpointAddr &&
-                        ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
-                        == USB_DIR_IN) && ((endpoint->bmAttributes &
-                        USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK))
-                        {
+                    usb_endpoint_is_bulk_in(endpoint)) {
                         buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
                         ftdi->bulk_in_size = buffer_size;
                         ftdi->bulk_in_endpointAddr = endpoint->bEndpointAddress;
@@ -2622,10 +2611,7 @@ static int ftdi_elan_probe(struct usb_interface *interface,
                         }
                 }
                 if (!ftdi->bulk_out_endpointAddr &&
-                        ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
-                        == USB_DIR_OUT) && ((endpoint->bmAttributes &
-                        USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK))
-                        {
+                    usb_endpoint_is_bulk_out(endpoint)) {
                         ftdi->bulk_out_endpointAddr =
                                 endpoint->bEndpointAddress;
                 }
diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c
index 8e6e195a22b..c9418535bef 100644
--- a/drivers/usb/misc/idmouse.c
+++ b/drivers/usb/misc/idmouse.c
@@ -125,12 +125,12 @@ static DEFINE_MUTEX(disconnect_mutex);
 
 static int idmouse_create_image(struct usb_idmouse *dev)
 {
-        int bytes_read = 0;
-        int bulk_read = 0;
-        int result = 0;
+        int bytes_read;
+        int bulk_read;
+        int result;
 
         memcpy(dev->bulk_in_buffer, HEADER, sizeof(HEADER)-1);
-        bytes_read += sizeof(HEADER)-1;
+        bytes_read = sizeof(HEADER)-1;
 
         /* reset the device and set a fast blink rate */
         result = ftip_command(dev, FTIP_RELEASE, 0, 0);
@@ -208,9 +208,9 @@ static inline void idmouse_delete(struct usb_idmouse *dev)
 
 static int idmouse_open(struct inode *inode, struct file *file)
 {
-        struct usb_idmouse *dev = NULL;
+        struct usb_idmouse *dev;
         struct usb_interface *interface;
-        int result = 0;
+        int result;
 
         /* prevent disconnects */
         mutex_lock(&disconnect_mutex);
@@ -305,7 +305,7 @@ static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count
                                 loff_t * ppos)
 {
         struct usb_idmouse *dev;
-        int result = 0;
+        int result;
 
         dev = (struct usb_idmouse *) file->private_data;
 
@@ -329,7 +329,7 @@ static int idmouse_probe(struct usb_interface *interface,
                                 const struct usb_device_id *id)
 {
         struct usb_device *udev = interface_to_usbdev(interface);
-        struct usb_idmouse *dev = NULL;
+        struct usb_idmouse *dev;
         struct usb_host_interface *iface_desc;
         struct usb_endpoint_descriptor *endpoint;
         int result;
@@ -350,11 +350,7 @@ static int idmouse_probe(struct usb_interface *interface,
 
         /* set up the endpoint information - use only the first bulk-in endpoint */
         endpoint = &iface_desc->endpoint[0].desc;
-        if (!dev->bulk_in_endpointAddr
-                && (endpoint->bEndpointAddress & USB_DIR_IN)
-                && ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
-                USB_ENDPOINT_XFER_BULK)) {
-
+        if (!dev->bulk_in_endpointAddr && usb_endpoint_is_bulk_in(endpoint)) {
                 /* we found a bulk in endpoint */
                 dev->orig_bi_size = le16_to_cpu(endpoint->wMaxPacketSize);
                 dev->bulk_in_size = 0x200; /* works _much_ faster */
diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c
index 27089497e71..5dce797bddb 100644
--- a/drivers/usb/misc/legousbtower.c
+++ b/drivers/usb/misc/legousbtower.c
@@ -317,12 +317,8 @@ static inline void tower_delete (struct lego_usb_tower *dev)
         tower_abort_transfers (dev);
 
         /* free data structures */
-        if (dev->interrupt_in_urb != NULL) {
-                usb_free_urb (dev->interrupt_in_urb);
-        }
-        if (dev->interrupt_out_urb != NULL) {
-                usb_free_urb (dev->interrupt_out_urb);
-        }
+        usb_free_urb(dev->interrupt_in_urb);
+        usb_free_urb(dev->interrupt_out_urb);
         kfree (dev->read_buffer);
         kfree (dev->interrupt_in_buffer);
         kfree (dev->interrupt_out_buffer);
@@ -502,15 +498,11 @@ static void tower_abort_transfers (struct lego_usb_tower *dev)
         if (dev->interrupt_in_running) {
                 dev->interrupt_in_running = 0;
                 mb();
-                if (dev->interrupt_in_urb != NULL && dev->udev) {
+                if (dev->udev)
                         usb_kill_urb (dev->interrupt_in_urb);
-                }
-        }
-        if (dev->interrupt_out_busy) {
-                if (dev->interrupt_out_urb != NULL && dev->udev) {
-                        usb_kill_urb (dev->interrupt_out_urb);
-                }
         }
+        if (dev->interrupt_out_busy && dev->udev)
+                usb_kill_urb(dev->interrupt_out_urb);
 
 exit:
         dbg(2, "%s: leave", __FUNCTION__);
@@ -898,14 +890,11 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
         for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
                 endpoint = &iface_desc->endpoint[i].desc;
 
-                if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) &&
-                    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
-                        dev->interrupt_in_endpoint = endpoint;
-                }
-
-                if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) &&
-                    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
-                        dev->interrupt_out_endpoint = endpoint;
+                if (usb_endpoint_xfer_int(endpoint)) {
+                        if (usb_endpoint_dir_in(endpoint))
+                                dev->interrupt_in_endpoint = endpoint;
+                        else
+                                dev->interrupt_out_endpoint = endpoint;
                 }
         }
         if(dev->interrupt_in_endpoint == NULL) {
diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c
index 33e716c6a79..9659c79e187 100644
--- a/drivers/usb/misc/phidgetkit.c
+++ b/drivers/usb/misc/phidgetkit.c
@@ -554,7 +554,7 @@ static int interfacekit_probe(struct usb_interface *intf, const struct usb_devic
                 return -ENODEV;
 
         endpoint = &interface->endpoint[0].desc;
-        if (!(endpoint->bEndpointAddress & 0x80)) 
+        if (!usb_endpoint_dir_in(endpoint))
                 return -ENODEV;
         /*
          * bmAttributes
@@ -653,8 +653,7 @@ out2:
                 device_remove_file(kit->dev, &dev_output_attrs[i]);
 out:
         if (kit) {
-                if (kit->irq)
-                        usb_free_urb(kit->irq);
+                usb_free_urb(kit->irq);
                 if (kit->data)
                         usb_buffer_free(dev, URB_INT_SIZE, kit->data, kit->data_dma);
                 if (kit->dev)
diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c
index 0385ffcc741..2bb4fa572bb 100644
--- a/drivers/usb/misc/phidgetmotorcontrol.c
+++ b/drivers/usb/misc/phidgetmotorcontrol.c
@@ -324,7 +324,7 @@ static int motorcontrol_probe(struct usb_interface *intf, const struct usb_devic
                 return -ENODEV;
 
         endpoint = &interface->endpoint[0].desc;
-        if (!(endpoint->bEndpointAddress & 0x80))
+        if (!usb_endpoint_dir_in(endpoint))
                 return -ENODEV;
 
         /*
@@ -393,8 +393,7 @@ out2:
                 device_remove_file(mc->dev, &dev_attrs[i]);
 out:
         if (mc) {
-                if (mc->irq)
-                        usb_free_urb(mc->irq);
+                usb_free_urb(mc->irq);
                 if (mc->data)
                         usb_buffer_free(dev, URB_INT_SIZE, mc->data, mc->data_dma);
                 if (mc->dev)
diff --git a/drivers/usb/misc/usb_u132.h b/drivers/usb/misc/usb_u132.h
index 551ba8906d6..dc2e5a31cae 100644
--- a/drivers/usb/misc/usb_u132.h
+++ b/drivers/usb/misc/usb_u132.h
@@ -52,7 +52,7 @@
 * the kernel to load the "u132-hcd" module.
 *
 * The "ftdi-u132" module provides the interface to the inserted
-* PC card and the "u132-hcd" module uses the API to send and recieve
+* PC card and the "u132-hcd" module uses the API to send and receive
 * data. The API features call-backs, so that part of the "u132-hcd"
 * module code will run in the context of one of the kernel threads
 * of the "ftdi-u132" module.
@@ -95,3 +95,7 @@ int usb_ftdi_elan_edset_setup(struct platform_device *pdev, u8 ed_number,
          int halted, int skipped, int actual, int non_null));
 int usb_ftdi_elan_edset_flush(struct platform_device *pdev, u8 ed_number,
         void *endp);
+int usb_ftdi_elan_read_pcimem(struct platform_device *pdev, int mem_offset,
+                              u8 width, u32 *data);
+int usb_ftdi_elan_write_pcimem(struct platform_device *pdev, int mem_offset,
+                               u8 width, u32 data);
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 7c2cbdf81d2..194065dbb51 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -138,7 +138,7 @@ get_endpoints (struct usbtest_dev *dev, struct usb_interface *intf)
                         default:
                                 continue;
                         }
-                        if (e->desc.bEndpointAddress & USB_DIR_IN) {
+                        if (usb_endpoint_dir_in(&e->desc)) {
                                 if (!in)
                                         in = e;
                         } else {
@@ -147,7 +147,7 @@ get_endpoints (struct usbtest_dev *dev, struct usb_interface *intf)
                         }
                         continue;
 try_iso:
-                        if (e->desc.bEndpointAddress & USB_DIR_IN) {
+                        if (usb_endpoint_dir_in(&e->desc)) {
                                 if (!iso_in)
                                         iso_in = e;
                         } else {
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index 881841e600d..95e682e2c9d 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -249,9 +249,9 @@ asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index,
 
         req->bRequestType = USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE;
         req->bRequest = cmd;
-        req->wValue = value;
-        req->wIndex = index;
-        req->wLength = size;
+        req->wValue = cpu_to_le16(value);
+        req->wIndex = cpu_to_le16(index);
+        req->wLength = cpu_to_le16(size);
 
         usb_fill_control_urb(urb, dev->udev,
                              usb_sndctrlpipe(dev->udev, 0),
diff --git a/drivers/usb/net/catc.c b/drivers/usb/net/catc.c
index f740325abac..907b820a5fa 100644
--- a/drivers/usb/net/catc.c
+++ b/drivers/usb/net/catc.c
@@ -786,14 +786,10 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id
         if ((!catc->ctrl_urb) || (!catc->tx_urb) || 
             (!catc->rx_urb) || (!catc->irq_urb)) {
                 err("No free urbs available.");
-                if (catc->ctrl_urb)
-                        usb_free_urb(catc->ctrl_urb);
-                if (catc->tx_urb)
-                        usb_free_urb(catc->tx_urb);
-                if (catc->rx_urb)
-                        usb_free_urb(catc->rx_urb);
-                if (catc->irq_urb)
-                        usb_free_urb(catc->irq_urb);
+                usb_free_urb(catc->ctrl_urb);
+                usb_free_urb(catc->tx_urb);
+                usb_free_urb(catc->rx_urb);
+                usb_free_urb(catc->irq_urb);
                 free_netdev(netdev);
                 return -ENOMEM;
         }
diff --git a/drivers/usb/net/cdc_ether.c b/drivers/usb/net/cdc_ether.c
index f6971b88349..44a91547146 100644
--- a/drivers/usb/net/cdc_ether.c
+++ b/drivers/usb/net/cdc_ether.c
@@ -200,8 +200,7 @@ next_desc:
 
                 dev->status = &info->control->cur_altsetting->endpoint [0];
                 desc = &dev->status->desc;
-                if (desc->bmAttributes != USB_ENDPOINT_XFER_INT
-                                || !(desc->bEndpointAddress & USB_DIR_IN)
+                if (!usb_endpoint_is_int_in(desc)
                                 || (le16_to_cpu(desc->wMaxPacketSize)
                                         < sizeof(struct usb_cdc_notification))
                                 || !desc->bInterval) {
diff --git a/drivers/usb/net/net1080.c b/drivers/usb/net/net1080.c
index ce00de8f13a..a77410562e1 100644
--- a/drivers/usb/net/net1080.c
+++ b/drivers/usb/net/net1080.c
@@ -237,12 +237,12 @@ static inline void nc_dump_usbctl(struct usbnet *dev, u16 usbctl)
 #define STATUS_CONN_OTHER       (1 << 14)
 #define STATUS_SUSPEND_OTHER    (1 << 13)
 #define STATUS_MAILBOX_OTHER    (1 << 12)
-#define STATUS_PACKETS_OTHER(n) (((n) >> 8) && 0x03)
+#define STATUS_PACKETS_OTHER(n) (((n) >> 8) & 0x03)
 
 #define STATUS_CONN_THIS        (1 << 6)
 #define STATUS_SUSPEND_THIS     (1 << 5)
 #define STATUS_MAILBOX_THIS     (1 << 4)
-#define STATUS_PACKETS_THIS(n)  (((n) >> 0) && 0x03)
+#define STATUS_PACKETS_THIS(n)  (((n) >> 0) & 0x03)
 
 #define STATUS_UNSPEC_MASK      0x0c8c
 #define STATUS_NOISE_MASK       ((u16)~(0x0303|STATUS_UNSPEC_MASK))
diff --git a/drivers/usb/net/pegasus.c b/drivers/usb/net/pegasus.c
index 78cf6f09128..b5690b3834e 100644
--- a/drivers/usb/net/pegasus.c
+++ b/drivers/usb/net/pegasus.c
@@ -163,6 +163,7 @@ static int get_registers(pegasus_t * pegasus, __u16 indx, __u16 size,
 
         /* using ATOMIC, we'd never wake up if we slept */
         if ((ret = usb_submit_urb(pegasus->ctrl_urb, GFP_ATOMIC))) {
+                set_current_state(TASK_RUNNING);
                 if (ret == -ENODEV)
                         netif_device_detach(pegasus->net);
                 if (netif_msg_drv(pegasus))
diff --git a/drivers/usb/net/usbnet.c b/drivers/usb/net/usbnet.c
index 79b5474fe23..327f9755567 100644
--- a/drivers/usb/net/usbnet.c
+++ b/drivers/usb/net/usbnet.c
@@ -116,7 +116,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
                         e = alt->endpoint + ep;
                         switch (e->desc.bmAttributes) {
                         case USB_ENDPOINT_XFER_INT:
-                                if (!(e->desc.bEndpointAddress & USB_DIR_IN))
+                                if (!usb_endpoint_dir_in(&e->desc))
                                         continue;
                                 intr = 1;
                                 /* FALLTHROUGH */
@@ -125,7 +125,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
                         default:
                                 continue;
                         }
-                        if (e->desc.bEndpointAddress & USB_DIR_IN) {
+                        if (usb_endpoint_dir_in(&e->desc)) {
                                 if (!intr && !in)
                                         in = e;
                                 else if (intr && !status)
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 2a8dd4cc943..2f4d303ee36 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -554,6 +554,17 @@ config USB_SERIAL_OMNINET
           To compile this driver as a module, choose M here: the
           module will be called omninet.
 
+config USB_SERIAL_DEBUG
+        tristate "USB Debugging Device"
+        depends on USB_SERIAL
+        help
+          Say Y here if you have a USB debugging device used to recieve
+          debugging data from another machine.  The most common of these
+          devices is the NetChip TurboCONNECT device.
+
+          To compile this driver as a module, choose M here: the
+          module will be called usb-debug.
+
 config USB_EZUSB
         bool
         depends on USB_SERIAL_KEYSPAN_PDA || USB_SERIAL_XIRCOM || USB_SERIAL_KEYSPAN || USB_SERIAL_WHITEHEAT
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index a5047dc599b..61166ad450e 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CP2101)                 += cp2101.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)              += cyberjack.o
 obj-$(CONFIG_USB_SERIAL_CYPRESS_M8)             += cypress_m8.o
+obj-$(CONFIG_USB_SERIAL_DEBUG)                  += usb_debug.o
 obj-$(CONFIG_USB_SERIAL_DIGI_ACCELEPORT)        += digi_acceleport.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT)               += io_edgeport.o
 obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI)            += io_ti.o
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 2a4ac9bd6a3..86bcf63b6ba 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -272,8 +272,11 @@ static void aircable_read(struct work_struct *work)
          */
         tty = port->tty;
 
-        if (!tty)
+        if (!tty) {
                 schedule_work(&priv->rx_work);
+                err("%s - No tty available", __FUNCTION__);
+                return ;
+        }
 
         count = min(64, serial_buf_data_avail(priv->rx_buf));
 
@@ -307,9 +310,7 @@ static int aircable_probe(struct usb_serial *serial,
 
         for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
                 endpoint = &iface_desc->endpoint[i].desc;
-                if (((endpoint->bEndpointAddress & 0x80) == 0x00) &&
-                        ((endpoint->bmAttributes & 3) == 0x02)) {
-                        /* we found our bulk out endpoint */
+                if (usb_endpoint_is_bulk_out(endpoint)) {
                         dbg("found bulk out on endpoint %d", i);
                         ++num_bulk_out;
                 }
diff --git a/drivers/usb/serial/airprime.c b/drivers/usb/serial/airprime.c
index 7f5d546da39..96c73726d74 100644
--- a/drivers/usb/serial/airprime.c
+++ b/drivers/usb/serial/airprime.c
@@ -19,6 +19,7 @@
 static struct usb_device_id id_table [] = {
         { USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
         { USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+        { USB_DEVICE(0x1410, 0x1430) }, /* Novatel Merlin XU870 HSDPA/3G */
         { USB_DEVICE(0x1410, 0x1100) }, /* ExpressCard34 Qualcomm 3G CDMA */
         { },
 };
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index ca52f12f0e2..863966c1c5a 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -85,10 +85,9 @@ static int ark3116_attach(struct usb_serial *serial)
         int i;
 
         for (i = 0; i < serial->num_ports; ++i) {
-                priv = kmalloc(sizeof (struct ark3116_private), GFP_KERNEL);
+                priv = kzalloc(sizeof(struct ark3116_private), GFP_KERNEL);
                 if (!priv)
                         goto cleanup;
-                memset(priv, 0x00, sizeof (struct ark3116_private));
                 spin_lock_init(&priv->lock);
 
                 usb_set_serial_port_data(serial->port[i], priv);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 3a9073dbfe6..7167728d764 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -166,19 +166,17 @@ static int usb_console_setup(struct console *co, char *options)
         if (serial->type->set_termios) {
                 /* build up a fake tty structure so that the open call has something
                  * to look at to get the cflag value */
-                tty = kmalloc (sizeof (*tty), GFP_KERNEL);
+                tty = kzalloc(sizeof(*tty), GFP_KERNEL);
                 if (!tty) {
                         err ("no more memory");
                         return -ENOMEM;
                 }
-                termios = kmalloc (sizeof (*termios), GFP_KERNEL);
+                termios = kzalloc(sizeof(*termios), GFP_KERNEL);
                 if (!termios) {
                         err ("no more memory");
                         kfree (tty);
                         return -ENOMEM;
                 }
-                memset (tty, 0x00, sizeof(*tty));
-                memset (termios, 0x00, sizeof(*termios));
                 termios->c_cflag = cflag;
                 tty->termios = termios;
                 port->tty = tty;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f2e89a08365..093f303b318 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1684,15 +1684,14 @@ static int __init cypress_init(void)
 
         info(DRIVER_DESC " " DRIVER_VERSION);
         return 0;
+
 failed_usb_register:
-        usb_deregister(&cypress_driver);
-failed_ca42v2_register:
         usb_serial_deregister(&cypress_ca42v2_device);
-failed_hidcom_register:
+failed_ca42v2_register:
         usb_serial_deregister(&cypress_hidcom_device);
-failed_em_register:
+failed_hidcom_register:
         usb_serial_deregister(&cypress_earthmate_device);
-
+failed_em_register:
         return retval;
 }
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index fd159b040bf..83d0e21145b 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -157,7 +157,7 @@
 *       to TASK_RUNNING will be lost and write_chan's subsequent call to
 *       schedule() will never return (unless it catches a signal).
 *       This race condition occurs because write_bulk_callback() (and thus
-*       the wakeup) are called asynchonously from an interrupt, rather than
+*       the wakeup) are called asynchronously from an interrupt, rather than
 *       from the scheduler.  We can avoid the race by calling the wakeup
 *       from the scheduler queue and that's our fix:  Now, at the end of
 *       write_bulk_callback() we queue up a wakeup call on the scheduler
diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index 5169c2d154a..97ee718b1da 100644
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -31,12 +31,11 @@ int ezusb_writememory (struct usb_serial *serial, int address, unsigned char *da
                 return -ENODEV;
         }
 
-        transfer_buffer =  kmalloc (length, GFP_KERNEL);
+        transfer_buffer = kmemdup(data, length, GFP_KERNEL);
         if (!transfer_buffer) {
                 dev_err(&serial->dev->dev, "%s - kmalloc(%d) failed.\n", __FUNCTION__, length);
                 return -ENOMEM;
         }
-        memcpy (transfer_buffer, data, length);
         result = usb_control_msg (serial->dev, usb_sndctrlpipe(serial->dev, 0), bRequest, 0x40, address, 0, transfer_buffer, length, 3000);
         kfree (transfer_buffer);
         return result;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 88ed5c1d236..72e4d48f51e 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1390,8 +1390,7 @@ static void ftdi_close (struct usb_serial_port *port, struct file *filp)
         flush_scheduled_work();
 
         /* shutdown our bulk read */
-        if (port->read_urb)
-                usb_kill_urb(port->read_urb);
+        usb_kill_urb(port->read_urb);
 } /* ftdi_close */
 
 
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 4543152a996..6530d391ebe 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1523,12 +1523,11 @@ static int garmin_attach (struct usb_serial *serial)
 
         dbg("%s", __FUNCTION__);
 
-        garmin_data_p = kmalloc (sizeof(struct garmin_data), GFP_KERNEL);
+        garmin_data_p = kzalloc(sizeof(struct garmin_data), GFP_KERNEL);
         if (garmin_data_p == NULL) {
                 dev_err(&port->dev, "%s - Out of memory\n", __FUNCTION__);
                 return -ENOMEM;
         }
-        memset (garmin_data_p, 0, sizeof(struct garmin_data));
         init_timer(&garmin_data_p->timer);
         spin_lock_init(&garmin_data_p->lock);
         INIT_LIST_HEAD(&garmin_data_p->pktlist);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 91bd3014ef1..d06547a13f2 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1038,9 +1038,7 @@ static void edge_close (struct usb_serial_port *port, struct file * filp)
         edge_port->open = FALSE;
         edge_port->openPending = FALSE;
 
-        if (edge_port->write_urb) {
-                usb_kill_urb(edge_port->write_urb);
-        }
+        usb_kill_urb(edge_port->write_urb);
 
         if (edge_port->write_urb) {
                 /* if this urb had a transfer buffer already (old transfer) free it */
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 2a4bb66691a..d3b9a351cef 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -206,10 +206,9 @@ static int ipw_open(struct usb_serial_port *port, struct file *filp)
 
         dbg("%s", __FUNCTION__);
 
-        buf_flow_init = kmalloc(16, GFP_KERNEL);
+        buf_flow_init = kmemdup(buf_flow_static, 16, GFP_KERNEL);
         if (!buf_flow_init)
                 return -ENOMEM;
-        memcpy(buf_flow_init, buf_flow_static, 16);
 
         if (port->tty)
                 port->tty->low_latency = 1;
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 53be824eb1b..7639652cec4 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -2306,22 +2306,16 @@ static void keyspan_shutdown (struct usb_serial *serial)
         }
 
         /* Now free them */
-        if (s_priv->instat_urb)
-                usb_free_urb(s_priv->instat_urb);
-        if (s_priv->glocont_urb)
-                usb_free_urb(s_priv->glocont_urb);
+        usb_free_urb(s_priv->instat_urb);
+        usb_free_urb(s_priv->glocont_urb);
         for (i = 0; i < serial->num_ports; ++i) {
                 port = serial->port[i];
                 p_priv = usb_get_serial_port_data(port);
-                if (p_priv->inack_urb)
-                        usb_free_urb(p_priv->inack_urb);
-                if (p_priv->outcont_urb)
-                        usb_free_urb(p_priv->outcont_urb);
+                usb_free_urb(p_priv->inack_urb);
+                usb_free_urb(p_priv->outcont_urb);
                 for (j = 0; j < 2; j++) {
-                        if (p_priv->in_urbs[j])
-                                usb_free_urb(p_priv->in_urbs[j]);
-                        if (p_priv->out_urbs[j])
-                                usb_free_urb(p_priv->out_urbs[j]);
+                        usb_free_urb(p_priv->in_urbs[j]);
+                        usb_free_urb(p_priv->out_urbs[j]);
                 }
         }
 
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index ff03331e0bc..237289920f0 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -185,13 +185,11 @@ static int kobil_startup (struct usb_serial *serial)
   
         for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
                 endpoint = &altsetting->endpoint[i];
-                if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) && 
-                    ((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+                if (usb_endpoint_is_int_out(&endpoint->desc)) {
                         dbg("%s Found interrupt out endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress);
                         priv->write_int_endpoint_address = endpoint->desc.bEndpointAddress;
                 }
-                if (((endpoint->desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) && 
-                    ((endpoint->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)) {
+                if (usb_endpoint_is_int_in(&endpoint->desc)) {
                         dbg("%s Found interrupt in  endpoint. Address: %d", __FUNCTION__, endpoint->desc.bEndpointAddress);
                         priv->read_int_endpoint_address = endpoint->desc.bEndpointAddress;
                 }
@@ -355,8 +353,7 @@ static void kobil_close (struct usb_serial_port *port, struct file *filp)
                 usb_free_urb( port->write_urb );
                 port->write_urb = NULL;
         }
-        if (port->interrupt_in_urb)
-                usb_kill_urb(port->interrupt_in_urb);
+        usb_kill_urb(port->interrupt_in_urb);
 }
 
 
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index b7582cc496d..a906e500a02 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -358,10 +358,8 @@ static int mct_u232_startup (struct usb_serial *serial)
         /* Puh, that's dirty */
         port = serial->port[0];
         rport = serial->port[1];
-        if (port->read_urb) {
-                /* No unlinking, it wasn't submitted yet. */
-                usb_free_urb(port->read_urb);
-        }
+        /* No unlinking, it wasn't submitted yet. */
+        usb_free_urb(port->read_urb);
         port->read_urb = rport->interrupt_in_urb;
         rport->interrupt_in_urb = NULL;
         port->read_urb->context = port;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 5b71962d035..02c89e10b2c 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2596,12 +2596,11 @@ static int mos7840_startup(struct usb_serial *serial)
 
         /* set up port private structures */
         for (i = 0; i < serial->num_ports; ++i) {
-                mos7840_port = kmalloc(sizeof(struct moschip_port), GFP_KERNEL);
+                mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
                 if (mos7840_port == NULL) {
                         err("%s - Out of memory", __FUNCTION__);
                         return -ENOMEM;
                 }
-                memset(mos7840_port, 0, sizeof(struct moschip_port));
 
                 /* Initialize all port interrupt end point to port 0 int endpoint *
                  * Our device has only one interrupt end point comman to all port */
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index 0610409a656..054abee8165 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -95,8 +95,7 @@ static void navman_close(struct usb_serial_port *port, struct file *filp)
 {
         dbg("%s - port %d", __FUNCTION__, port->number);
 
-        if (port->interrupt_in_urb)
-                usb_kill_urb(port->interrupt_in_urb);
+        usb_kill_urb(port->interrupt_in_urb);
 }
 
 static int navman_write(struct usb_serial_port *port,
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 07400c0c8a8..ae98d8cbdbb 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -228,6 +228,7 @@ static int product_5052_count;
 /* null entry */
 static struct usb_device_id ti_id_table_3410[1+TI_EXTRA_VID_PID_COUNT+1] = {
         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
+        { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
 };
 
 static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
@@ -239,6 +240,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = {
 
 static struct usb_device_id ti_id_table_combined[] = {
         { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) },
+        { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
         { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
@@ -459,13 +461,12 @@ static int ti_startup(struct usb_serial *serial)
 
         /* set up port structures */
         for (i = 0; i < serial->num_ports; ++i) {
-                tport = kmalloc(sizeof(struct ti_port), GFP_KERNEL);
+                tport = kzalloc(sizeof(struct ti_port), GFP_KERNEL);
                 if (tport == NULL) {
                         dev_err(&dev->dev, "%s - out of memory\n", __FUNCTION__);
                         status = -ENOMEM;
                         goto free_tports;
                 }
-                memset(tport, 0, sizeof(struct ti_port));
                 spin_lock_init(&tport->tp_lock);
                 tport->tp_uart_base_addr = (i == 0 ? TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
                 tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h
index 02c1aeb9e1b..b5541bf991b 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.h
+++ b/drivers/usb/serial/ti_usb_3410_5052.h
@@ -28,6 +28,7 @@
 /* Vendor and product ids */
 #define TI_VENDOR_ID                    0x0451
 #define TI_3410_PRODUCT_ID              0x3410
+#define TI_3410_EZ430_ID                0xF430  /* TI ez430 development tool */
 #define TI_5052_BOOT_PRODUCT_ID         0x5052  /* no EEPROM, no firmware */
 #define TI_5152_BOOT_PRODUCT_ID         0x5152  /* no EEPROM, no firmware */
 #define TI_5052_EEPROM_PRODUCT_ID       0x505A  /* EEPROM, no firmware */
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 2cfba8488a9..3d5072f14b8 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -953,32 +953,28 @@ probe_error:
                 port = serial->port[i];
                 if (!port)
                         continue;
-                if (port->read_urb)
-                        usb_free_urb (port->read_urb);
+                usb_free_urb(port->read_urb);
                 kfree(port->bulk_in_buffer);
         }
         for (i = 0; i < num_bulk_out; ++i) {
                 port = serial->port[i];
                 if (!port)
                         continue;
-                if (port->write_urb)
-                        usb_free_urb (port->write_urb);
+                usb_free_urb(port->write_urb);
                 kfree(port->bulk_out_buffer);
         }
         for (i = 0; i < num_interrupt_in; ++i) {
                 port = serial->port[i];
                 if (!port)
                         continue;
-                if (port->interrupt_in_urb)
-                        usb_free_urb (port->interrupt_in_urb);
+                usb_free_urb(port->interrupt_in_urb);
                 kfree(port->interrupt_in_buffer);
         }
         for (i = 0; i < num_interrupt_out; ++i) {
                 port = serial->port[i];
                 if (!port)
                         continue;
-                if (port->interrupt_out_urb)
-                        usb_free_urb (port->interrupt_out_urb);
+                usb_free_urb(port->interrupt_out_urb);
                 kfree(port->interrupt_out_buffer);
         }
 
diff --git a/drivers/usb/serial/usb_debug.c b/drivers/usb/serial/usb_debug.c
new file mode 100644
index 00000000000..257a5e43687
--- /dev/null
+++ b/drivers/usb/serial/usb_debug.c
@@ -0,0 +1,65 @@
+/*
+ * USB Debug cable driver
+ *
+ * Copyright (C) 2006 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License version
+ *      2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+        { USB_DEVICE(0x0525, 0x127a) },
+        { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver debug_driver = {
+        .name =         "debug",
+        .probe =        usb_serial_probe,
+        .disconnect =   usb_serial_disconnect,
+        .id_table =     id_table,
+        .no_dynamic_id =        1,
+};
+
+static struct usb_serial_driver debug_device = {
+        .driver = {
+                .owner =        THIS_MODULE,
+                .name =         "debug",
+        },
+        .id_table =             id_table,
+        .num_interrupt_in =     NUM_DONT_CARE,
+        .num_bulk_in =          NUM_DONT_CARE,
+        .num_bulk_out =         NUM_DONT_CARE,
+        .num_ports =            1,
+};
+
+static int __init debug_init(void)
+{
+        int retval;
+
+        retval = usb_serial_register(&debug_device);
+        if (retval)
+                return retval;
+        retval = usb_register(&debug_driver);
+        if (retval)
+                usb_serial_deregister(&debug_device);
+        return retval;
+}
+
+static void __exit debug_exit(void)
+{
+        usb_deregister(&debug_driver);
+        usb_serial_deregister(&debug_device);
+}
+
+module_init(debug_init);
+module_exit(debug_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index befe2e11a04..eef5eaa5fa0 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -348,8 +348,7 @@ static void visor_close (struct usb_serial_port *port, struct file * filp)
                          
         /* shutdown our urbs */
         usb_kill_urb(port->read_urb);
-        if (port->interrupt_in_urb)
-                usb_kill_urb(port->interrupt_in_urb);
+        usb_kill_urb(port->interrupt_in_urb);
 
         /* Try to send shutdown message, if the device is gone, this will just fail. */
         transfer_buffer =  kmalloc (0x12, GFP_KERNEL);
diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c
index 3baf448e300..3a158d58441 100644
--- a/drivers/usb/storage/onetouch.c
+++ b/drivers/usb/storage/onetouch.c
@@ -142,10 +142,7 @@ int onetouch_connect_input(struct us_data *ss)
                 return -ENODEV;
 
         endpoint = &interface->endpoint[2].desc;
-        if (!(endpoint->bEndpointAddress & USB_DIR_IN))
-                return -ENODEV;
-        if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-                        != USB_ENDPOINT_XFER_INT)
+        if (!usb_endpoint_is_int_in(endpoint))
                 return -ENODEV;
 
         pipe = usb_rcvintpipe(udev, endpoint->bEndpointAddress);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index efb047f431e..db8b26012c7 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1318,6 +1318,16 @@ UNUSUAL_DEV(  0x1019, 0x0c55, 0x0000, 0x0110,
                 US_SC_DEVICE, US_PR_DEVICE, usb_stor_ucr61s2b_init,
                 0 ),
 
+/* Reported by Jaco Kroon <jaco@kroon.co.za>
+ * The usb-storage module found on the Digitech GNX4 (and supposedly other
+ * devices) misbehaves and causes a bunch of invalid I/O errors.
+ */
+UNUSUAL_DEV(  0x1210, 0x0003, 0x0100, 0x0100,
+                "Digitech HMG",
+                "DigiTech Mass Storage",
+                US_SC_DEVICE, US_PR_DEVICE, NULL,
+                US_FL_IGNORE_RESIDUE ),
+
 /* Reported by Vilius Bilinkevicius <vilisas AT xxx DOT lt) */
 UNUSUAL_DEV(  0x132b, 0x000b, 0x0001, 0x0001,
                 "Minolta",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index b8d6031b097..b401084b3d2 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -740,18 +740,16 @@ static int get_pipes(struct us_data *us)
                 ep = &altsetting->endpoint[i].desc;
 
                 /* Is it a BULK endpoint? */
-                if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-                                == USB_ENDPOINT_XFER_BULK) {
+                if (usb_endpoint_xfer_bulk(ep)) {
                         /* BULK in or out? */
-                        if (ep->bEndpointAddress & USB_DIR_IN)
+                        if (usb_endpoint_dir_in(ep))
                                 ep_in = ep;
                         else
                                 ep_out = ep;
                 }
 
                 /* Is it an interrupt endpoint? */
-                else if ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
-                                == USB_ENDPOINT_XFER_INT) {
+                else if (usb_endpoint_xfer_int(ep)) {
                         ep_int = ep;
                 }
         }