usb: musb: pass configuration specifics via pdata

Use platform_data to pass musb configuration-specific
details to musb driver.

This patch will prevent that other platforms selecting
HAVE_CLK and enabling musb won't break tree building.

The other parts of it will come when linux-omap merge
up more omap2/3 board-files.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

3 files changed, 18 insertions, 202 deletions

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 462586d06da..d68ec6daf33 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -990,12 +990,6 @@ static void musb_shutdown(struct platform_device *pdev)
  * We don't currently use dynamic fifo setup capability to do anything
  * more than selecting one of a bunch of predefined configurations.
  */
-#ifdef MUSB_C_DYNFIFO_DEF
-#define can_dynfifo()   1
-#else
-#define can_dynfifo()   0
-#endif
-
 #if defined(CONFIG_USB_TUSB6010) || \
         defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP34XX)
 static ushort __initdata fifo_mode = 4;
@@ -1008,8 +1002,6 @@ module_param(fifo_mode, ushort, 0);
 MODULE_PARM_DESC(fifo_mode, "initial endpoint configuration");
 
 
-#define DYN_FIFO_SIZE (1<<(MUSB_C_RAM_BITS+2))
-
 enum fifo_style { FIFO_RXTX, FIFO_TX, FIFO_RX } __attribute__ ((packed));
 enum buf_mode { BUF_SINGLE, BUF_DOUBLE } __attribute__ ((packed));
 
@@ -1119,11 +1111,12 @@ fifo_setup(struct musb *musb, struct musb_hw_ep  *hw_ep,
 
         c_size = size - 3;
         if (cfg->mode == BUF_DOUBLE) {
-                if ((offset + (maxpacket << 1)) > DYN_FIFO_SIZE)
+                if ((offset + (maxpacket << 1)) >
+                                (1 << (musb->config->ram_bits + 2)))
                         return -EMSGSIZE;
                 c_size |= MUSB_FIFOSZ_DPB;
         } else {
-                if ((offset + maxpacket) > DYN_FIFO_SIZE)
+                if ((offset + maxpacket) > (1 << (musb->config->ram_bits + 2)))
                         return -EMSGSIZE;
         }
 
@@ -1219,13 +1212,13 @@ static int __init ep_config_from_table(struct musb *musb)
         /* assert(offset > 0) */
 
         /* NOTE:  for RTL versions >= 1.400 EPINFO and RAMINFO would
-         * be better than static MUSB_C_NUM_EPS and DYN_FIFO_SIZE...
+         * be better than static musb->config->num_eps and DYN_FIFO_SIZE...
          */
 
         for (i = 0; i < n; i++) {
                 u8      epn = cfg->hw_ep_num;
 
-                if (epn >= MUSB_C_NUM_EPS) {
+                if (epn >= musb->config->num_eps) {
                         pr_debug("%s: invalid ep %d\n",
                                         musb_driver_name, epn);
                         continue;
@@ -1242,8 +1235,8 @@ static int __init ep_config_from_table(struct musb *musb)
 
         printk(KERN_DEBUG "%s: %d/%d max ep, %d/%d memory\n",
                         musb_driver_name,
-                        n + 1, MUSB_C_NUM_EPS * 2 - 1,
-                        offset, DYN_FIFO_SIZE);
+                        n + 1, musb->config->num_eps * 2 - 1,
+                        offset, (1 << (musb->config->ram_bits + 2)));
 
 #ifdef CONFIG_USB_MUSB_HDRC_HCD
         if (!musb->bulk_ep) {
@@ -1270,7 +1263,7 @@ static int __init ep_config_from_hw(struct musb *musb)
 
         /* FIXME pick up ep0 maxpacket size */
 
-        for (epnum = 1; epnum < MUSB_C_NUM_EPS; epnum++) {
+        for (epnum = 1; epnum < musb->config->num_eps; epnum++) {
                 musb_ep_select(mbase, epnum);
                 hw_ep = musb->endpoints + epnum;
 
@@ -1424,14 +1417,14 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
         musb->epmask = 1;
 
         if (reg & MUSB_CONFIGDATA_DYNFIFO) {
-                if (can_dynfifo())
+                if (musb->config->dyn_fifo)
                         status = ep_config_from_table(musb);
                 else {
                         ERR("reconfigure software for Dynamic FIFOs\n");
                         status = -ENODEV;
                 }
         } else {
-                if (!can_dynfifo())
+                if (!musb->config->dyn_fifo)
                         status = ep_config_from_hw(musb);
                 else {
                         ERR("reconfigure software for static FIFOs\n");
@@ -1788,7 +1781,8 @@ static void musb_irq_work(struct work_struct *data)
  */
 
 static struct musb *__init
-allocate_instance(struct device *dev, void __iomem *mbase)
+allocate_instance(struct device *dev,
+                struct musb_hdrc_config *config, void __iomem *mbase)
 {
         struct musb             *musb;
         struct musb_hw_ep       *ep;
@@ -1820,8 +1814,9 @@ allocate_instance(struct device *dev, void __iomem *mbase)
         musb->mregs = mbase;
         musb->ctrl_base = mbase;
         musb->nIrq = -ENODEV;
+        musb->config = config;
         for (epnum = 0, ep = musb->endpoints;
-                        epnum < MUSB_C_NUM_EPS;
+                        epnum < musb->config->num_eps;
                         epnum++, ep++) {
 
                 ep->musb = musb;
@@ -1929,7 +1924,7 @@ bad_config:
         }
 
         /* allocate */
-        musb = allocate_instance(dev, ctrl);
+        musb = allocate_instance(dev, plat->config, ctrl);
         if (!musb)
                 return -ENOMEM;
 
@@ -1987,7 +1982,7 @@ bad_config:
         musb_generic_disable(musb);
 
         /* setup musb parts of the core (especially endpoints) */
-        status = musb_core_init(plat->multipoint
+        status = musb_core_init(plat->config->multipoint
                         ? MUSB_CONTROLLER_MHDRC
                         : MUSB_CONTROLLER_HDRC, musb);
         if (status < 0)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 90035c12ab5..eade46d8170 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -56,18 +56,6 @@ struct musb_ep;
 #include "musb_debug.h"
 #include "musb_dma.h"
 
-#ifdef CONFIG_USB_MUSB_SOC
-/*
- * Get core configuration from a header converted (by cfg_conv)
- * from the Verilog config file generated by the core config utility
- *
- * For now we assume that header is provided along with other
- * arch-specific files.  Discrete chips will need a build tweak.
- * So will using AHB IDs from silicon that provides them.
- */
-#include <asm/arch/hdrc_cnf.h>
-#endif
-
 #include "musb_io.h"
 #include "musb_regs.h"
 
@@ -440,6 +428,8 @@ struct musb {
         struct usb_gadget_driver *gadget_driver;        /* its driver */
 #endif
 
+        struct musb_hdrc_config *config;
+
 #ifdef MUSB_CONFIG_PROC_FS
         struct proc_dir_entry *proc_entry;
 #endif
diff --git a/drivers/usb/musb/tusb6010.h b/drivers/usb/musb/tusb6010.h
index db6dad0750a..ab8c96286ce 100644
--- a/drivers/usb/musb/tusb6010.h
+++ b/drivers/usb/musb/tusb6010.h
@@ -230,173 +230,4 @@ extern u8 tusb_get_revision(struct musb *musb);
 #define TUSB_REV_30     0x30
 #define TUSB_REV_31     0x31
 
-/*----------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_TUSB6010
-
-/* configuration parameters specific to this silicon */
-
-/* Number of Tx endpoints. Legal values are 1 - 16 (this value includes EP0) */
-#define MUSB_C_NUM_EPT 16
-
-/* Number of Rx endpoints. Legal values are 1 - 16 (this value includes EP0) */
-#define MUSB_C_NUM_EPR 16
-
-/* Endpoint 1 to 15 direction types. C_EP1_DEF is defined if either Tx endpoint
- * 1 or Rx endpoint 1 are used.
- */
-#define MUSB_C_EP1_DEF
-
-/* C_EP1_TX_DEF is defined if Tx endpoint 1 is used */
-#define MUSB_C_EP1_TX_DEF
-
-/* C_EP1_RX_DEF is defined if Rx endpoint 1 is used */
-#define MUSB_C_EP1_RX_DEF
-
-/* C_EP1_TOR_DEF is defined if Tx endpoint 1 and Rx endpoint 1 share a FIFO */
-/* #define C_EP1_TOR_DEF */
-
-/* C_EP1_TAR_DEF is defined if both Tx endpoint 1 and Rx endpoint 1 are used
- * and do not share a FIFO.
- */
-#define MUSB_C_EP1_TAR_DEF
-
-/* Similarly for all other used endpoints */
-#define MUSB_C_EP2_DEF
-#define MUSB_C_EP2_TX_DEF
-#define MUSB_C_EP2_RX_DEF
-#define MUSB_C_EP2_TAR_DEF
-#define MUSB_C_EP3_DEF
-#define MUSB_C_EP3_TX_DEF
-#define MUSB_C_EP3_RX_DEF
-#define MUSB_C_EP3_TAR_DEF
-#define MUSB_C_EP4_DEF
-#define MUSB_C_EP4_TX_DEF
-#define MUSB_C_EP4_RX_DEF
-#define MUSB_C_EP4_TAR_DEF
-
-/* Endpoint 1 to 15 FIFO address bits. Legal values are 3 to 13 - corresponding
- * to FIFO sizes of 8 to 8192 bytes. If an Tx endpoint shares a FIFO with an Rx
- * endpoint then the Rx FIFO size must be the same as the Tx FIFO size. All
- * endpoints 1 to 15 must be defined, unused endpoints should be set to 2.
- */
-#define MUSB_C_EP1T_BITS 5
-#define MUSB_C_EP1R_BITS 5
-#define MUSB_C_EP2T_BITS 5
-#define MUSB_C_EP2R_BITS 5
-#define MUSB_C_EP3T_BITS 3
-#define MUSB_C_EP3R_BITS 3
-#define MUSB_C_EP4T_BITS 3
-#define MUSB_C_EP4R_BITS 3
-
-#define MUSB_C_EP5T_BITS 2
-#define MUSB_C_EP5R_BITS 2
-#define MUSB_C_EP6T_BITS 2
-#define MUSB_C_EP6R_BITS 2
-#define MUSB_C_EP7T_BITS 2
-#define MUSB_C_EP7R_BITS 2
-#define MUSB_C_EP8T_BITS 2
-#define MUSB_C_EP8R_BITS 2
-#define MUSB_C_EP9T_BITS 2
-#define MUSB_C_EP9R_BITS 2
-#define MUSB_C_EP10T_BITS 2
-#define MUSB_C_EP10R_BITS 2
-#define MUSB_C_EP11T_BITS 2
-#define MUSB_C_EP11R_BITS 2
-#define MUSB_C_EP12T_BITS 2
-#define MUSB_C_EP12R_BITS 2
-#define MUSB_C_EP13T_BITS 2
-#define MUSB_C_EP13R_BITS 2
-#define MUSB_C_EP14T_BITS 2
-#define MUSB_C_EP14R_BITS 2
-#define MUSB_C_EP15T_BITS 2
-#define MUSB_C_EP15R_BITS 2
-
-/* Define the following constant if the USB2.0 Transceiver Macrocell data width
- * is 16-bits.
- */
-/* #define C_UTM_16 */
-
-/* Define this constant if the CPU uses big-endian byte ordering. */
-/* #define C_BIGEND */
-
-/* Define the following constant if any Tx endpoint is required to support
- * multiple bulk packets.
- */
-/* #define C_MP_TX */
-
-/* Define the following constant if any Rx endpoint is required to support
- * multiple bulk packets.
- */
-/* #define C_MP_RX */
-
-/* Define the following constant if any Tx endpoint is required to support high
- * bandwidth ISO.
- */
-/* #define C_HB_TX */
-
-/* Define the following constant if any Rx endpoint is required to support high
- * bandwidth ISO.
- */
-/* #define C_HB_RX */
-
-/* Define the following constant if software connect/disconnect control is
- * required.
- */
-#define MUSB_C_SOFT_CON
-
-/* Define the following constant if Vendor Control Registers are required. */
-/* #define C_VEND_REG */
-
-/* Vendor control register widths. */
-#define MUSB_C_VCTL_BITS 4
-#define MUSB_C_VSTAT_BITS 8
-
-/* Define the following constant to include a DMA controller. */
-/* #define C_DMA */
-
-/* Define the following constant if 2 or more DMA channels are required. */
-/* #define C_DMA2 */
-
-/* Define the following constant if 3 or more DMA channels are required. */
-/* #define C_DMA3 */
-
-/* Define the following constant if 4 or more DMA channels are required. */
-/* #define C_DMA4 */
-
-/* Define the following constant if 5 or more DMA channels are required. */
-/* #define C_DMA5 */
-
-/* Define the following constant if 6 or more DMA channels are required. */
-/* #define C_DMA6 */
-
-/* Define the following constant if 7 or more DMA channels are required. */
-/* #define C_DMA7 */
-
-/* Define the following constant if 8 or more DMA channels are required. */
-/* #define C_DMA8 */
-
-/* Enable Dynamic FIFO Sizing */
-#define MUSB_C_DYNFIFO_DEF
-
-/* Derived constants. The following constants are derived from the previous
- * configuration constants
- */
-
-/* Total number of endpoints. Legal values are 2 - 16. This must be equal to
- * the larger of C_NUM_EPT, C_NUM_EPR
- */
-/* #define MUSB_C_NUM_EPS 5 */
-
-/* C_EPMAX_BITS is equal to the largest endpoint FIFO word address bits */
-#define MUSB_C_EPMAX_BITS 11
-
-/* C_RAM_BITS is the number of address bits required to address the RAM (32-bit
- * addresses).  It is defined as log2 of the sum of 2** of all the endpoint FIFO
- * dword address bits (rounded up).
- */
-#define MUSB_C_RAM_BITS 12
-
-#endif /* CONFIG_USB_TUSB6010 */
-
 #endif /* __TUSB6010_H__ */