xhci: Remove references to HC_STATE_HALT.

The xHCI driver doesn't ever test hcd->state for HC_STATE_HALT.  The USB
core recently stopped using it internally, so there's no point in setting
it in the driver.  We still need to set HC_STATE_RUNNING in order to make
it past the USB core's hcd->state check in register_roothub().

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>

1 files changed, 1 insertions, 4 deletions

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8dfa67ff5fa..63b8db5275e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -95,7 +95,6 @@ void xhci_quiesce(struct xhci_hcd *xhci)
  * HC will complete any current and actively pipelined transactions, and
  * should halt within 16 ms of the run/stop bit being cleared.
  * Read HC Halted bit in the status register to see when the HC is finished.
- * XXX: shouldn't we set HC_STATE_HALT here somewhere?
  */
 int xhci_halt(struct xhci_hcd *xhci)
 {
@@ -134,7 +133,7 @@ int xhci_start(struct xhci_hcd *xhci)
 }
 
 /*
- * Reset a halted HC, and set the internal HC state to HC_STATE_HALT.
+ * Reset a halted HC.
  *
  * This resets pipelines, timers, counters, state machines, etc.
  * Transactions will be terminated immediately, and operational registers
@@ -156,8 +155,6 @@ int xhci_reset(struct xhci_hcd *xhci)
         command = xhci_readl(xhci, &xhci->op_regs->command);
         command |= CMD_RESET;
         xhci_writel(xhci, command, &xhci->op_regs->command);
-        /* XXX: Why does EHCI set this here?  Shouldn't other code do this? */
-        xhci_to_hcd(xhci)->state = HC_STATE_HALT;
 
         ret = handshake(xhci, &xhci->op_regs->command,
                         CMD_RESET, 0, 250 * 1000);