sh-sci: rework serial console support

Rework sh-sci serial console code.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 23 insertions, 24 deletions

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 5f37f7d3166..d2cd1a400c1 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -91,10 +91,6 @@ struct sh_sci_priv {
 #endif
 };
 
-#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
-static struct sci_port *serial_console_port;
-#endif
-
 /* Function prototypes */
 static void sci_stop_tx(struct uart_port *port);
 
@@ -1083,6 +1079,18 @@ static void __init sci_init_ports(void)
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+static struct tty_driver *serial_console_device(struct console *co, int *index)
+{
+        struct uart_driver *p = &sci_uart_driver;
+        *index = co->index;
+        return p->tty_driver;
+}
+
+static void serial_console_putchar(struct uart_port *port, int ch)
+{
+        sci_poll_put_char(port, ch);
+}
+
 /*
  *      Print a string to the serial port trying not to disturb
  *      any possible real use of the port...
@@ -1090,16 +1098,10 @@ static void __init sci_init_ports(void)
 static void serial_console_write(struct console *co, const char *s,
                                  unsigned count)
 {
-        struct uart_port *port = &serial_console_port->port;
+        struct uart_port *port = co->data;
         unsigned short bits;
-        int i;
 
-        for (i = 0; i < count; i++) {
-                if (*s == 10)
-                        sci_poll_put_char(port, '\r');
-
-                sci_poll_put_char(port, *s++);
-        }
+        uart_console_write(co->data, s, count, serial_console_putchar);
 
         /* wait until fifo is empty and last bit has been transmitted */
         bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
@@ -1109,6 +1111,7 @@ static void serial_console_write(struct console *co, const char *s,
 
 static int __init serial_console_setup(struct console *co, char *options)
 {
+        struct sci_port *sci_port;
         struct uart_port *port;
         int baud = 115200;
         int bits = 8;
@@ -1124,8 +1127,9 @@ static int __init serial_console_setup(struct console *co, char *options)
         if (co->index >= SCI_NPORTS)
                 co->index = 0;
 
-        serial_console_port = &sci_ports[co->index];
-        port = &serial_console_port->port;
+        sci_port = &sci_ports[co->index];
+        port = &sci_port->port;
+        co->data = port;
 
         /*
          * Also need to check port->type, we don't actually have any
@@ -1135,21 +1139,17 @@ static int __init serial_console_setup(struct console *co, char *options)
          */
         if (!port->type)
                 return -ENODEV;
-        if (!port->membase || !port->mapbase)
-                return -ENODEV;
-
-        port->type = serial_console_port->type;
 
 #ifdef CONFIG_HAVE_CLK
-        if (!serial_console_port->clk)
-                serial_console_port->clk = clk_get(NULL, "module_clk");
+        if (!sci_port->clk)
+                sci_port->clk = clk_get(NULL, "module_clk");
 #endif
 
         if (port->flags & UPF_IOREMAP)
                 sci_config_port(port, 0);
 
-        if (serial_console_port->enable)
-                serial_console_port->enable(port);
+        if (sci_port->enable)
+                sci_port->enable(port);
 
         if (options)
                 uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1165,12 +1165,11 @@ static int __init serial_console_setup(struct console *co, char *options)
 
 static struct console serial_console = {
         .name           = "ttySC",
-        .device         = uart_console_device,
+        .device         = serial_console_device,
         .write          = serial_console_write,
         .setup          = serial_console_setup,
         .flags          = CON_PRINTBUFFER,
         .index          = -1,
-        .data           = &sci_uart_driver,
 };
 
 static int __init sci_console_init(void)