[SCSI] qla2xxx: Pull-down scsi-host-addition to follow board initialization.

Return to previous held-logic of calling scsi_add_host() only
after the board has been completely initialized.  Also return
pci_*() error-codes during probe failure paths.

This also corrects an issue where only lun 0 is being scanned for
a given port.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 28 insertions, 27 deletions

diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3c97aa45772..d960637fd56 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1150,7 +1150,7 @@ iospace_error_exit:
  */
 int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
 {
-        int     ret;
+        int     ret = -ENODEV;
         device_reg_t __iomem *reg;
         struct Scsi_Host *host;
         scsi_qla_host_t *ha;
@@ -1161,7 +1161,7 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
         fc_port_t *fcport;
 
         if (pci_enable_device(pdev))
-                return -1;
+                goto probe_out;
 
         host = scsi_host_alloc(&qla2x00_driver_template,
             sizeof(scsi_qla_host_t));
@@ -1183,9 +1183,8 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
 
         /* Configure PCI I/O space */
         ret = qla2x00_iospace_config(ha);
-        if (ret != 0) {
-                goto probe_alloc_failed;
-        }
+        if (ret)
+                goto probe_failed;
 
         /* Sanitize the information from PCI BIOS. */
         host->irq = pdev->irq;
@@ -1258,23 +1257,10 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
                 qla_printk(KERN_WARNING, ha,
                     "[ERROR] Failed to allocate memory for adapter\n");
 
-                goto probe_alloc_failed;
+                ret = -ENOMEM;
+                goto probe_failed;
         }
 
-        pci_set_drvdata(pdev, ha);
-        host->this_id = 255;
-        host->cmd_per_lun = 3;
-        host->unique_id = ha->instance;
-        host->max_cmd_len = MAX_CMDSZ;
-        host->max_channel = ha->ports - 1;
-        host->max_id = ha->max_targets;
-        host->max_lun = ha->max_luns;
-        host->transportt = qla2xxx_transport_template;
-        if (scsi_add_host(host, &pdev->dev))
-                goto probe_alloc_failed;
-
-        qla2x00_alloc_sysfs_attr(ha);
-
         if (qla2x00_initialize_adapter(ha) &&
             !(ha->device_flags & DFLG_NO_CABLE)) {
 
@@ -1285,11 +1271,10 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
                     "Adapter flags %x.\n",
                     ha->host_no, ha->device_flags));
 
+                ret = -ENODEV;
                 goto probe_failed;
         }
 
-        qla2x00_init_host_attr(ha);
-
         /*
          * Startup the kernel thread for this host adapter
          */
@@ -1299,17 +1284,26 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
                 qla_printk(KERN_WARNING, ha,
                     "Unable to start DPC thread!\n");
 
+                ret = -ENODEV;
                 goto probe_failed;
         }
         wait_for_completion(&ha->dpc_inited);
 
+        host->this_id = 255;
+        host->cmd_per_lun = 3;
+        host->unique_id = ha->instance;
+        host->max_cmd_len = MAX_CMDSZ;
+        host->max_channel = ha->ports - 1;
+        host->max_lun = MAX_LUNS;
+        host->transportt = qla2xxx_transport_template;
+
         if (IS_QLA2100(ha) || IS_QLA2200(ha))
                 ret = request_irq(host->irq, qla2100_intr_handler,
                     SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
         else
                 ret = request_irq(host->irq, qla2300_intr_handler,
                     SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
-        if (ret != 0) {
+        if (ret) {
                 qla_printk(KERN_WARNING, ha,
                     "Failed to reserve interrupt %d already in use.\n",
                     host->irq);
@@ -1363,9 +1357,18 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
                 msleep(10);
         }
 
+        pci_set_drvdata(pdev, ha);
         ha->flags.init_done = 1;
         num_hosts++;
 
+        ret = scsi_add_host(host, &pdev->dev);
+        if (ret)
+                goto probe_failed;
+
+        qla2x00_alloc_sysfs_attr(ha);
+
+        qla2x00_init_host_attr(ha);
+
         qla_printk(KERN_INFO, ha, "\n"
             " QLogic Fibre Channel HBA Driver: %s\n"
             "  QLogic %s - %s\n"
@@ -1384,9 +1387,6 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info)
 probe_failed:
         fc_remove_host(ha->host);
 
-        scsi_remove_host(host);
-
-probe_alloc_failed:
         qla2x00_free_device(ha);
 
         scsi_host_put(host);
@@ -1394,7 +1394,8 @@ probe_alloc_failed:
 probe_disable_device:
         pci_disable_device(pdev);
 
-        return -1;
+probe_out:
+        return ret;
 }
 EXPORT_SYMBOL_GPL(qla2x00_probe_one);