[SCSI] megaraid_sas: add new controllers (0x78 0x79)

Add the new controllers (0x78 0x79) support to the driver.  Those
controllers are LSI's next generation (gen2) SAS controllers.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: parenthesise a macro]
Signed-off-by: Bo Yang <bo.yang@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

2 files changed, 112 insertions, 2 deletions

diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index e880cd450e0..870dc1c6302 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -10,7 +10,7 @@
  *         2 of the License, or (at your option) any later version.
  *
  * FILE         : megaraid_sas.c
- * Version      : v00.00.03.20-rc1
+ * Version     : v00.00.04.01-rc1
  *
  * Authors:
  *      (email-id : megaraidlinux@lsi.com)
@@ -71,6 +71,10 @@ static struct pci_device_id megasas_pci_table[] = {
         /* ppc IOP */
         {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078DE)},
         /* ppc IOP */
+        {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS1078GEN2)},
+        /* gen2*/
+        {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_SAS0079GEN2)},
+        /* gen2*/
         {PCI_DEVICE(PCI_VENDOR_ID_LSI_LOGIC, PCI_DEVICE_ID_LSI_VERDE_ZCR)},
         /* xscale IOP, vega */
         {PCI_DEVICE(PCI_VENDOR_ID_DELL, PCI_DEVICE_ID_DELL_PERC5)},
@@ -324,6 +328,99 @@ static struct megasas_instance_template megasas_instance_template_ppc = {
 };
 
 /**
+*       The following functions are defined for gen2 (deviceid : 0x78 0x79)
+*       controllers
+*/
+
+/**
+ * megasas_enable_intr_gen2 -  Enables interrupts
+ * @regs:                      MFI register set
+ */
+static inline void
+megasas_enable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+        writel(0xFFFFFFFF, &(regs)->outbound_doorbell_clear);
+
+        /* write ~0x00000005 (4 & 1) to the intr mask*/
+        writel(~MFI_GEN2_ENABLE_INTERRUPT_MASK, &(regs)->outbound_intr_mask);
+
+        /* Dummy readl to force pci flush */
+        readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_disable_intr_gen2 - Disables interrupt
+ * @regs:                      MFI register set
+ */
+static inline void
+megasas_disable_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+        u32 mask = 0xFFFFFFFF;
+        writel(mask, &regs->outbound_intr_mask);
+        /* Dummy readl to force pci flush */
+        readl(&regs->outbound_intr_mask);
+}
+
+/**
+ * megasas_read_fw_status_reg_gen2 - returns the current FW status value
+ * @regs:                      MFI register set
+ */
+static u32
+megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs)
+{
+        return readl(&(regs)->outbound_scratch_pad);
+}
+
+/**
+ * megasas_clear_interrupt_gen2 -      Check & clear interrupt
+ * @regs:                              MFI register set
+ */
+static int
+megasas_clear_intr_gen2(struct megasas_register_set __iomem *regs)
+{
+        u32 status;
+        /*
+         * Check if it is our interrupt
+         */
+        status = readl(&regs->outbound_intr_status);
+
+        if (!(status & MFI_GEN2_ENABLE_INTERRUPT_MASK))
+                return 1;
+
+        /*
+         * Clear the interrupt by writing back the same value
+         */
+        writel(status, &regs->outbound_doorbell_clear);
+
+        /* Dummy readl to force pci flush */
+        readl(&regs->outbound_intr_status);
+
+        return 0;
+}
+/**
+ * megasas_fire_cmd_gen2 -     Sends command to the FW
+ * @frame_phys_addr :          Physical address of cmd
+ * @frame_count :              Number of frames for the command
+ * @regs :                     MFI register set
+ */
+static inline void
+megasas_fire_cmd_gen2(dma_addr_t frame_phys_addr, u32 frame_count,
+                        struct megasas_register_set __iomem *regs)
+{
+        writel((frame_phys_addr | (frame_count<<1))|1,
+                        &(regs)->inbound_queue_port);
+}
+
+static struct megasas_instance_template megasas_instance_template_gen2 = {
+
+        .fire_cmd = megasas_fire_cmd_gen2,
+        .enable_intr = megasas_enable_intr_gen2,
+        .disable_intr = megasas_disable_intr_gen2,
+        .clear_intr = megasas_clear_intr_gen2,
+        .read_fw_status_reg = megasas_read_fw_status_reg_gen2,
+};
+
+/**
 *       This is the end of set of functions & definitions
 *       specific to ppc (deviceid : 0x60) controllers
 */
@@ -1982,7 +2079,12 @@ static int megasas_init_mfi(struct megasas_instance *instance)
         /*
          * Map the message registers
          */
-        instance->base_addr = pci_resource_start(instance->pdev, 0);
+        if ((instance->pdev->device == PCI_DEVICE_ID_LSI_SAS1078GEN2) ||
+                (instance->pdev->device == PCI_DEVICE_ID_LSI_SAS0079GEN2)) {
+                instance->base_addr = pci_resource_start(instance->pdev, 1);
+        } else {
+                instance->base_addr = pci_resource_start(instance->pdev, 0);
+        }
 
         if (pci_request_regions(instance->pdev, "megasas: LSI")) {
                 printk(KERN_DEBUG "megasas: IO memory region busy!\n");
@@ -2004,6 +2106,10 @@ static int megasas_init_mfi(struct megasas_instance *instance)
                 case PCI_DEVICE_ID_LSI_SAS1078DE:
                         instance->instancet = &megasas_instance_template_ppc;
                         break;
+                case PCI_DEVICE_ID_LSI_SAS1078GEN2:
+                case PCI_DEVICE_ID_LSI_SAS0079GEN2:
+                        instance->instancet = &megasas_instance_template_gen2;
+                        break;
                 case PCI_DEVICE_ID_LSI_SAS1064R:
                 case PCI_DEVICE_ID_DELL_PERC5:
                 default:
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index b0c41e67170..7072ff2cec0 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -28,6 +28,8 @@
 #define PCI_DEVICE_ID_LSI_SAS1078R              0x0060
 #define PCI_DEVICE_ID_LSI_SAS1078DE             0x007C
 #define PCI_DEVICE_ID_LSI_VERDE_ZCR             0x0413
+#define PCI_DEVICE_ID_LSI_SAS1078GEN2           0x0078
+#define PCI_DEVICE_ID_LSI_SAS0079GEN2           0x0079
 
 /*
  * =====================================
@@ -580,6 +582,8 @@ struct megasas_ctrl_info {
 #define MEGASAS_COMPLETION_TIMER_INTERVAL      (HZ/10)
 
 #define MFI_REPLY_1078_MESSAGE_INTERRUPT        0x80000000
+#define MFI_REPLY_GEN2_MESSAGE_INTERRUPT        0x00000001
+#define MFI_GEN2_ENABLE_INTERRUPT_MASK          (0x00000001 | 0x00000004)
 
 /*
 * register set for both 1068 and 1078 controllers