[SCSI] sym2 version 2.2.1

sym2 version 2.2.1:
 - Fix MMIO BAR detection (Thanks to Bob Picco)
 - Fix odd-sized transfers with a wide bus (Thanks to Larry Stephens)
 - Write posting fixes (Thanks to Thibaut Varene)
 - Change one of the GFP_KERNEL allocations back into a GFP_ATOMIC
 - Make CCB_BA() return a script-endian address
 - Move range checks and disabling of devices from the queuecommand path
   to slave_alloc()
 - Remove a warning in sym_setup_cdb()
 - Keep a pointer to the scsi_target instead of the scsi_dev in the tcb
 - Remove a check for the upper layers passing an oversized cmd
 - Replace CAM_REQ_ constants with the Linux DID_ constants
 - Replace CAM_DIR_ constants with the Linux DMA_ constants
 - Inline sym_read_parisc_pdc() on non-parisc systems

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 53 insertions, 67 deletions

diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c
index 5b07c6ec3ec..be58ffd5a43 100644
--- a/drivers/scsi/sym53c8xx_2/sym_glue.c
+++ b/drivers/scsi/sym53c8xx_2/sym_glue.c
@@ -155,10 +155,11 @@ pci_get_base_address(struct pci_dev *pdev, int index, unsigned long *basep)
         base = tmp;
         if ((tmp & 0x7) == PCI_BASE_ADDRESS_MEM_TYPE_64) {
                 pci_read_config_dword(pdev, PCI_BAR_OFFSET(index++), &tmp);
-                if (tmp > 0)
+                if (tmp > 0) {
                         dev_err(&pdev->dev,
                                 "BAR %d is 64-bit, disabling\n", index - 1);
-                base = 0;
+                        base = 0;
+                }
         }
 
         if ((base & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
@@ -389,13 +390,20 @@ static int sym_scatter_no_sglist(struct sym_hcb *np, struct sym_ccb *cp, struct
 {
         struct sym_tblmove *data = &cp->phys.data[SYM_CONF_MAX_SG-1];
         int segment;
+        unsigned int len = cmd->request_bufflen;
 
-        cp->data_len = cmd->request_bufflen;
-
-        if (cmd->request_bufflen) {
+        if (len) {
                 dma_addr_t baddr = map_scsi_single_data(np, cmd);
                 if (baddr) {
-                        sym_build_sge(np, data, baddr, cmd->request_bufflen);
+                        if (len & 1) {
+                                struct sym_tcb *tp = &np->target[cp->target];
+                                if (tp->head.wval & EWS) {
+                                        len++;
+                                        cp->odd_byte_adjustment++;
+                                }
+                        }
+                        cp->data_len = len;
+                        sym_build_sge(np, data, baddr, len);
                         segment = 1;
                 } else {
                         segment = -2;
@@ -418,6 +426,7 @@ static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd
                 segment = sym_scatter_no_sglist(np, cp, cmd);
         else if ((use_sg = map_scsi_sg_data(np, cmd)) > 0) {
                 struct scatterlist *scatter = (struct scatterlist *)cmd->buffer;
+                struct sym_tcb *tp = &np->target[cp->target];
                 struct sym_tblmove *data;
 
                 if (use_sg > SYM_CONF_MAX_SG) {
@@ -431,6 +440,11 @@ static int sym_scatter(struct sym_hcb *np, struct sym_ccb *cp, struct scsi_cmnd
                         dma_addr_t baddr = sg_dma_address(&scatter[segment]);
                         unsigned int len = sg_dma_len(&scatter[segment]);
 
+                        if ((len & 1) && (tp->head.wval & EWS)) {
+                                len++;
+                                cp->odd_byte_adjustment++;
+                        }
+
                         sym_build_sge(np, &data[segment], baddr, len);
                         cp->data_len += len;
                 }
@@ -456,10 +470,8 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd)
          *  Minimal checkings, so that we will not 
          *  go outside our tables.
          */
-        if (sdev->id == np->myaddr ||
-            sdev->id >= SYM_CONF_MAX_TARGET ||
-            sdev->lun >= SYM_CONF_MAX_LUN) {
-                sym_xpt_done2(np, cmd, CAM_DEV_NOT_THERE);
+        if (sdev->id == np->myaddr) {
+                sym_xpt_done2(np, cmd, DID_NO_CONNECT);
                 return 0;
         }
 
@@ -469,28 +481,6 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd)
         tp = &np->target[sdev->id];
 
         /*
-         *  Complete the 1st INQUIRY command with error 
-         *  condition if the device is flagged NOSCAN 
-         *  at BOOT in the NVRAM. This may speed up 
-         *  the boot and maintain coherency with BIOS 
-         *  device numbering. Clearing the flag allows 
-         *  user to rescan skipped devices later.
-         *  We also return error for devices not flagged 
-         *  for SCAN LUNS in the NVRAM since some mono-lun 
-         *  devices behave badly when asked for some non 
-         *  zero LUN. Btw, this is an absolute hack.:-)
-         */
-        if (cmd->cmnd[0] == 0x12 || cmd->cmnd[0] == 0x0) {
-                if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) ||
-                    ((tp->usrflags & SYM_SCAN_LUNS_DISABLED) && 
-                     sdev->lun != 0)) {
-                        tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
-                        sym_xpt_done2(np, cmd, CAM_DEV_NOT_THERE);
-                        return 0;
-                }
-        }
-
-        /*
          *  Select tagged/untagged.
          */
         lp = sym_lp(tp, sdev->lun);
@@ -511,23 +501,10 @@ static int sym_queue_command(struct sym_hcb *np, struct scsi_cmnd *cmd)
  */
 static inline int sym_setup_cdb(struct sym_hcb *np, struct scsi_cmnd *cmd, struct sym_ccb *cp)
 {
-        u32     cmd_ba;
-        int     cmd_len;
-
-        /*
-         *  CDB is 16 bytes max.
-         */
-        if (cmd->cmd_len > sizeof(cp->cdb_buf)) {
-                sym_set_cam_status(cp->cmd, CAM_REQ_INVALID);
-                return -1;
-        }
-
         memcpy(cp->cdb_buf, cmd->cmnd, cmd->cmd_len);
-        cmd_ba  = CCB_BA (cp, cdb_buf[0]);
-        cmd_len = cmd->cmd_len;
 
-        cp->phys.cmd.addr       = cpu_to_scr(cmd_ba);
-        cp->phys.cmd.size       = cpu_to_scr(cmd_len);
+        cp->phys.cmd.addr = CCB_BA(cp, cdb_buf[0]);
+        cp->phys.cmd.size = cpu_to_scr(cmd->cmd_len);
 
         return 0;
 }
@@ -554,10 +531,7 @@ int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct s
         if (dir != DMA_NONE) {
                 cp->segments = sym_scatter(np, cp, cmd);
                 if (cp->segments < 0) {
-                        if (cp->segments == -2)
-                                sym_set_cam_status(cmd, CAM_RESRC_UNAVAIL);
-                        else
-                                sym_set_cam_status(cmd, CAM_REQ_TOO_BIG);
+                        sym_set_cam_status(cmd, DID_ERROR);
                         goto out_abort;
                 }
         } else {
@@ -855,7 +829,7 @@ prepare:
         ep->to_do = to_do;
         /* Complete the command with locks held as required by the driver */
         if (to_do == SYM_EH_DO_COMPLETE)
-                sym_xpt_done2(np, cmd, CAM_REQ_ABORTED);
+                sym_xpt_done2(np, cmd, DID_ABORT);
 
         /* Wait for completion with locks released, as required by kernel */
         if (to_do == SYM_EH_DO_WAIT) {
@@ -921,7 +895,7 @@ static void sym_tune_dev_queuing(struct sym_tcb *tp, int lun, u_short reqtags)
         lp->s.reqtags     = reqtags;
 
         if (reqtags != oldtags) {
-                dev_info(&tp->sdev->sdev_target->dev,
+                dev_info(&tp->starget->dev,
                          "tagged command queuing %s, command queue depth %d.\n",
                           lp->s.reqtags ? "enabled" : "disabled",
                           lp->started_limit);
@@ -981,22 +955,34 @@ static int device_queue_depth(struct sym_hcb *np, int target, int lun)
         return DEF_DEPTH;
 }
 
-static int sym53c8xx_slave_alloc(struct scsi_device *device)
+static int sym53c8xx_slave_alloc(struct scsi_device *sdev)
 {
-        struct sym_hcb *np = sym_get_hcb(device->host);
-        struct sym_tcb *tp = &np->target[device->id];
-        if (!tp->sdev)
-                tp->sdev = device;
+        struct sym_hcb *np;
+        struct sym_tcb *tp;
 
-        return 0;
-}
+        if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN)
+                return -ENXIO;
 
-static void sym53c8xx_slave_destroy(struct scsi_device *device)
-{
-        struct sym_hcb *np = sym_get_hcb(device->host);
-        struct sym_tcb *tp = &np->target[device->id];
-        if (tp->sdev == device)
-                tp->sdev = NULL;
+        np = sym_get_hcb(sdev->host);
+        tp = &np->target[sdev->id];
+
+        /*
+         * Fail the device init if the device is flagged NOSCAN at BOOT in
+         * the NVRAM.  This may speed up boot and maintain coherency with
+         * BIOS device numbering.  Clearing the flag allows the user to
+         * rescan skipped devices later.  We also return an error for
+         * devices not flagged for SCAN LUNS in the NVRAM since some single
+         * lun devices behave badly when asked for a non zero LUN.
+         */
+
+        if ((tp->usrflags & SYM_SCAN_BOOT_DISABLED) ||
+            ((tp->usrflags & SYM_SCAN_LUNS_DISABLED) && sdev->lun != 0)) {
+                tp->usrflags &= ~SYM_SCAN_BOOT_DISABLED;
+                return -ENXIO;
+        }
+
+        tp->starget = sdev->sdev_target;
+        return 0;
 }
 
 /*
@@ -1897,6 +1883,7 @@ static int sym_detach(struct sym_hcb *np, struct pci_dev *pdev)
          */
         printk("%s: resetting chip\n", sym_name(np));
         OUTB(np, nc_istat, SRST);
+        INB(np, nc_mbox1);
         udelay(10);
         OUTB(np, nc_istat, 0);
 
@@ -1915,7 +1902,6 @@ static struct scsi_host_template sym2_template = {
         .queuecommand           = sym53c8xx_queue_command,
         .slave_alloc            = sym53c8xx_slave_alloc,
         .slave_configure        = sym53c8xx_slave_configure,
-        .slave_destroy          = sym53c8xx_slave_destroy,
         .eh_abort_handler       = sym53c8xx_eh_abort_handler,
         .eh_device_reset_handler = sym53c8xx_eh_device_reset_handler,
         .eh_bus_reset_handler   = sym53c8xx_eh_bus_reset_handler,