[SCSI] use scatter lists for all block pc requests and simplify hw handlers

Original From: Mike Christie <michaelc@cs.wisc.edu>

Add scsi_execute_req() as a replacement for scsi_wait_req()

Fixed up various pieces (added REQ_SPECIAL and caught req use after
free)

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 49 insertions, 63 deletions

diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 48edd67982a..d2ca4b8fbc1 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -111,15 +111,14 @@ MODULE_PARM_DESC(inq_timeout,
 
 /**
  * scsi_unlock_floptical - unlock device via a special MODE SENSE command
- * @sreq:       used to send the command
+ * @sdev:       scsi device to send command to
  * @result:     area to store the result of the MODE SENSE
  *
  * Description:
- *     Send a vendor specific MODE SENSE (not a MODE SELECT) command using
- *     @sreq to unlock a device, storing the (unused) results into result.
+ *     Send a vendor specific MODE SENSE (not a MODE SELECT) command.
  *     Called for BLIST_KEY devices.
  **/
-static void scsi_unlock_floptical(struct scsi_request *sreq,
+static void scsi_unlock_floptical(struct scsi_device *sdev,
                                   unsigned char *result)
 {
         unsigned char scsi_cmd[MAX_COMMAND_SIZE];
@@ -129,11 +128,10 @@ static void scsi_unlock_floptical(struct scsi_request *sreq,
         scsi_cmd[1] = 0;
         scsi_cmd[2] = 0x2e;
         scsi_cmd[3] = 0;
-        scsi_cmd[4] = 0x2a;     /* size */
+        scsi_cmd[4] = 0x2a;     /* size */
         scsi_cmd[5] = 0;
-        sreq->sr_cmd_len = 0;
-        sreq->sr_data_direction = DMA_FROM_DEVICE;
-        scsi_wait_req(sreq, scsi_cmd, result, 0x2a /* size */, SCSI_TIMEOUT, 3);
+        scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE, result, 0x2a, NULL,
+                         SCSI_TIMEOUT, 3);
 }
 
 /**
@@ -433,26 +431,26 @@ void scsi_target_reap(struct scsi_target *starget)
 
 /**
  * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY
- * @sreq:       used to send the INQUIRY
+ * @sdev:       scsi_device to probe
  * @inq_result: area to store the INQUIRY result
+ * @result_len: len of inq_result
  * @bflags:     store any bflags found here
  *
  * Description:
- *     Probe the lun associated with @sreq using a standard SCSI INQUIRY;
+ *     Probe the lun associated with @req using a standard SCSI INQUIRY;
  *
- *     If the INQUIRY is successful, sreq->sr_result is zero and: the
+ *     If the INQUIRY is successful, zero is returned and the
  *     INQUIRY data is in @inq_result; the scsi_level and INQUIRY length
- *     are copied to the Scsi_Device at @sreq->sr_device (sdev);
- *     any flags value is stored in *@bflags.
+ *     are copied to the Scsi_Device any flags value is stored in *@bflags.
  **/
-static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result,
-                           int *bflags)
+static int scsi_probe_lun(struct scsi_device *sdev, char *inq_result,
+                          int result_len, int *bflags)
 {
-        struct scsi_device *sdev = sreq->sr_device;     /* a bit ugly */
+        char sense[SCSI_SENSE_BUFFERSIZE];
         unsigned char scsi_cmd[MAX_COMMAND_SIZE];
         int first_inquiry_len, try_inquiry_len, next_inquiry_len;
         int response_len = 0;
-        int pass, count;
+        int pass, count, result;
         struct scsi_sense_hdr sshdr;
 
         *bflags = 0;
@@ -475,28 +473,28 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result,
                 memset(scsi_cmd, 0, 6);
                 scsi_cmd[0] = INQUIRY;
                 scsi_cmd[4] = (unsigned char) try_inquiry_len;
-                sreq->sr_cmd_len = 0;
-                sreq->sr_data_direction = DMA_FROM_DEVICE;
 
+                memset(sense, 0, sizeof(sense));
                 memset(inq_result, 0, try_inquiry_len);
-                scsi_wait_req(sreq, (void *) scsi_cmd, (void *) inq_result,
-                                try_inquiry_len,
-                                HZ/2 + HZ*scsi_inq_timeout, 3);
+
+                result = scsi_execute_req(sdev,  scsi_cmd, DMA_FROM_DEVICE,
+                                          inq_result, try_inquiry_len, sense,
+                                          HZ / 2 + HZ * scsi_inq_timeout, 3);
 
                 SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY %s "
                                 "with code 0x%x\n",
-                                sreq->sr_result ? "failed" : "successful",
-                                sreq->sr_result));
+                                result ? "failed" : "successful", result));
 
-                if (sreq->sr_result) {
+                if (result) {
                         /*
                          * not-ready to ready transition [asc/ascq=0x28/0x0]
                          * or power-on, reset [asc/ascq=0x29/0x0], continue.
                          * INQUIRY should not yield UNIT_ATTENTION
                          * but many buggy devices do so anyway. 
                          */
-                        if ((driver_byte(sreq->sr_result) & DRIVER_SENSE) &&
-                            scsi_request_normalize_sense(sreq, &sshdr)) {
+                        if ((driver_byte(result) & DRIVER_SENSE) &&
+                            scsi_normalize_sense(sense, sizeof(sense),
+                                                 &sshdr)) {
                                 if ((sshdr.sense_key == UNIT_ATTENTION) &&
                                     ((sshdr.asc == 0x28) ||
                                      (sshdr.asc == 0x29)) &&
@@ -507,7 +505,7 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result,
                 break;
         }
 
-        if (sreq->sr_result == 0) {
+        if (result == 0) {
                 response_len = (unsigned char) inq_result[4] + 5;
                 if (response_len > 255)
                         response_len = first_inquiry_len;       /* sanity */
@@ -556,8 +554,8 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result,
 
         /* If the last transfer attempt got an error, assume the
          * peripheral doesn't exist or is dead. */
-        if (sreq->sr_result)
-                return;
+        if (result)
+                return -EIO;
 
         /* Don't report any more data than the device says is valid */
         sdev->inquiry_len = min(try_inquiry_len, response_len);
@@ -593,7 +591,7 @@ static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result,
             (sdev->scsi_level == 1 && (inq_result[3] & 0x0f) == 1))
                 sdev->scsi_level++;
 
-        return;
+        return 0;
 }
 
 /**
@@ -800,9 +798,8 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
                                   void *hostdata)
 {
         struct scsi_device *sdev;
-        struct scsi_request *sreq;
         unsigned char *result;
-        int bflags, res = SCSI_SCAN_NO_RESPONSE;
+        int bflags, res = SCSI_SCAN_NO_RESPONSE, result_len = 256;
         struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
 
         /*
@@ -831,16 +828,13 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
         sdev = scsi_alloc_sdev(starget, lun, hostdata);
         if (!sdev)
                 goto out;
-        sreq = scsi_allocate_request(sdev, GFP_ATOMIC);
-        if (!sreq)
-                goto out_free_sdev;
-        result = kmalloc(256, GFP_ATOMIC |
+
+        result = kmalloc(result_len, GFP_ATOMIC |
                         ((shost->unchecked_isa_dma) ? __GFP_DMA : 0));
         if (!result)
-                goto out_free_sreq;
+                goto out_free_sdev;
 
-        scsi_probe_lun(sreq, result, &bflags);
-        if (sreq->sr_result)
+        if (scsi_probe_lun(sdev, result, result_len, &bflags))
                 goto out_free_result;
 
         /*
@@ -868,7 +862,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
         if (res == SCSI_SCAN_LUN_PRESENT) {
                 if (bflags & BLIST_KEY) {
                         sdev->lockable = 0;
-                        scsi_unlock_floptical(sreq, result);
+                        scsi_unlock_floptical(sdev, result);
                 }
                 if (bflagsp)
                         *bflagsp = bflags;
@@ -876,8 +870,6 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
 
  out_free_result:
         kfree(result);
- out_free_sreq:
-        scsi_release_request(sreq);
  out_free_sdev:
         if (res == SCSI_SCAN_LUN_PRESENT) {
                 if (sdevp) {
@@ -1065,13 +1057,14 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags,
                                 int rescan)
 {
         char devname[64];
+        char sense[SCSI_SENSE_BUFFERSIZE];
         unsigned char scsi_cmd[MAX_COMMAND_SIZE];
         unsigned int length;
         unsigned int lun;
         unsigned int num_luns;
         unsigned int retries;
+        int result;
         struct scsi_lun *lunp, *lun_data;
-        struct scsi_request *sreq;
         u8 *data;
         struct scsi_sense_hdr sshdr;
         struct scsi_target *starget = scsi_target(sdev);
@@ -1089,10 +1082,6 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags,
         if (bflags & BLIST_NOLUN)
                 return 0;
 
-        sreq = scsi_allocate_request(sdev, GFP_ATOMIC);
-        if (!sreq)
-                goto out;
-
         sprintf(devname, "host %d channel %d id %d",
                 sdev->host->host_no, sdev->channel, sdev->id);
 
@@ -1110,7 +1099,7 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags,
         lun_data = kmalloc(length, GFP_ATOMIC |
                            (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0));
         if (!lun_data)
-                goto out_release_request;
+                goto out;
 
         scsi_cmd[0] = REPORT_LUNS;
 
@@ -1129,8 +1118,6 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags,
 
         scsi_cmd[10] = 0;       /* reserved */
         scsi_cmd[11] = 0;       /* control */
-        sreq->sr_cmd_len = 0;
-        sreq->sr_data_direction = DMA_FROM_DEVICE;
 
         /*
          * We can get a UNIT ATTENTION, for example a power on/reset, so
@@ -1146,29 +1133,30 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags,
                 SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: Sending"
                                 " REPORT LUNS to %s (try %d)\n", devname,
                                 retries));
-                scsi_wait_req(sreq, scsi_cmd, lun_data, length,
-                                SCSI_TIMEOUT + 4*HZ, 3);
+
+                memset(sense, 0, sizeof(sense));
+                result = scsi_execute_req(sdev, scsi_cmd, DMA_FROM_DEVICE,
+                                          lun_data, length, sense,
+                                          SCSI_TIMEOUT + 4 * HZ, 3);
+
                 SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS"
-                                " %s (try %d) result 0x%x\n", sreq->sr_result
-                                ?  "failed" : "successful", retries,
-                                sreq->sr_result));
-                if (sreq->sr_result == 0)
+                                " %s (try %d) result 0x%x\n", result
+                                ?  "failed" : "successful", retries, result));
+                if (result == 0)
                         break;
-                else if (scsi_request_normalize_sense(sreq, &sshdr)) {
+                else if (scsi_normalize_sense(sense, sizeof(sense), &sshdr)) {
                         if (sshdr.sense_key != UNIT_ATTENTION)
                                 break;
                 }
         }
 
-        if (sreq->sr_result) {
+        if (result) {
                 /*
                  * The device probably does not support a REPORT LUN command
                  */
                 kfree(lun_data);
-                scsi_release_request(sreq);
                 return 1;
         }
-        scsi_release_request(sreq);
 
         /*
          * Get the length from the first four bytes of lun_data.
@@ -1242,8 +1230,6 @@ static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags,
         kfree(lun_data);
         return 0;
 
- out_release_request:
-        scsi_release_request(sreq);
  out:
         /*
          * We are out of memory, don't try scanning any further.