diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 18:20:36 -0400 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 18:20:36 -0400 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/pcmcia/ricoh.h |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/pcmcia/ricoh.h')
-rw-r--r-- | drivers/pcmcia/ricoh.h | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/drivers/pcmcia/ricoh.h b/drivers/pcmcia/ricoh.h new file mode 100644 index 00000000000..01098c841f8 --- /dev/null +++ b/drivers/pcmcia/ricoh.h | |||
@@ -0,0 +1,206 @@ | |||
1 | /* | ||
2 | * ricoh.h 1.9 1999/10/25 20:03:34 | ||
3 | * | ||
4 | * The contents of this file are subject to the Mozilla Public License | ||
5 | * Version 1.1 (the "License"); you may not use this file except in | ||
6 | * compliance with the License. You may obtain a copy of the License | ||
7 | * at http://www.mozilla.org/MPL/ | ||
8 | * | ||
9 | * Software distributed under the License is distributed on an "AS IS" | ||
10 | * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See | ||
11 | * the License for the specific language governing rights and | ||
12 | * limitations under the License. | ||
13 | * | ||
14 | * The initial developer of the original code is David A. Hinds | ||
15 | * <dahinds@users.sourceforge.net>. Portions created by David A. Hinds | ||
16 | * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. | ||
17 | * | ||
18 | * Alternatively, the contents of this file may be used under the | ||
19 | * terms of the GNU General Public License version 2 (the "GPL"), in which | ||
20 | * case the provisions of the GPL are applicable instead of the | ||
21 | * above. If you wish to allow the use of your version of this file | ||
22 | * only under the terms of the GPL and not to allow others to use | ||
23 | * your version of this file under the MPL, indicate your decision by | ||
24 | * deleting the provisions above and replace them with the notice and | ||
25 | * other provisions required by the GPL. If you do not delete the | ||
26 | * provisions above, a recipient may use your version of this file | ||
27 | * under either the MPL or the GPL. | ||
28 | */ | ||
29 | |||
30 | #ifndef _LINUX_RICOH_H | ||
31 | #define _LINUX_RICOH_H | ||
32 | |||
33 | |||
34 | #define RF5C_MODE_CTL 0x1f /* Mode control */ | ||
35 | #define RF5C_PWR_CTL 0x2f /* Mixed voltage control */ | ||
36 | #define RF5C_CHIP_ID 0x3a /* Chip identification */ | ||
37 | #define RF5C_MODE_CTL_3 0x3b /* Mode control 3 */ | ||
38 | |||
39 | /* I/O window address offset */ | ||
40 | #define RF5C_IO_OFF(w) (0x36+((w)<<1)) | ||
41 | |||
42 | /* Flags for RF5C_MODE_CTL */ | ||
43 | #define RF5C_MODE_ATA 0x01 /* ATA mode */ | ||
44 | #define RF5C_MODE_LED_ENA 0x02 /* IRQ 12 is LED */ | ||
45 | #define RF5C_MODE_CA21 0x04 | ||
46 | #define RF5C_MODE_CA22 0x08 | ||
47 | #define RF5C_MODE_CA23 0x10 | ||
48 | #define RF5C_MODE_CA24 0x20 | ||
49 | #define RF5C_MODE_CA25 0x40 | ||
50 | #define RF5C_MODE_3STATE_BIT7 0x80 | ||
51 | |||
52 | /* Flags for RF5C_PWR_CTL */ | ||
53 | #define RF5C_PWR_VCC_3V 0x01 | ||
54 | #define RF5C_PWR_IREQ_HIGH 0x02 | ||
55 | #define RF5C_PWR_INPACK_ENA 0x04 | ||
56 | #define RF5C_PWR_5V_DET 0x08 | ||
57 | #define RF5C_PWR_TC_SEL 0x10 /* Terminal Count: irq 11 or 15 */ | ||
58 | #define RF5C_PWR_DREQ_LOW 0x20 | ||
59 | #define RF5C_PWR_DREQ_OFF 0x00 /* DREQ steering control */ | ||
60 | #define RF5C_PWR_DREQ_INPACK 0x40 | ||
61 | #define RF5C_PWR_DREQ_SPKR 0x80 | ||
62 | #define RF5C_PWR_DREQ_IOIS16 0xc0 | ||
63 | |||
64 | /* Values for RF5C_CHIP_ID */ | ||
65 | #define RF5C_CHIP_RF5C296 0x32 | ||
66 | #define RF5C_CHIP_RF5C396 0xb2 | ||
67 | |||
68 | /* Flags for RF5C_MODE_CTL_3 */ | ||
69 | #define RF5C_MCTL3_DISABLE 0x01 /* Disable PCMCIA interface */ | ||
70 | #define RF5C_MCTL3_DMA_ENA 0x02 | ||
71 | |||
72 | /* Register definitions for Ricoh PCI-to-CardBus bridges */ | ||
73 | |||
74 | /* Extra bits in CB_BRIDGE_CONTROL */ | ||
75 | #define RL5C46X_BCR_3E0_ENA 0x0800 | ||
76 | #define RL5C46X_BCR_3E2_ENA 0x1000 | ||
77 | |||
78 | /* Bridge Configuration Register */ | ||
79 | #define RL5C4XX_CONFIG 0x80 /* 16 bit */ | ||
80 | #define RL5C4XX_CONFIG_IO_1_MODE 0x0200 | ||
81 | #define RL5C4XX_CONFIG_IO_0_MODE 0x0100 | ||
82 | #define RL5C4XX_CONFIG_PREFETCH 0x0001 | ||
83 | |||
84 | /* Misc Control Register */ | ||
85 | #define RL5C4XX_MISC 0x0082 /* 16 bit */ | ||
86 | #define RL5C4XX_MISC_HW_SUSPEND_ENA 0x0002 | ||
87 | #define RL5C4XX_MISC_VCCEN_POL 0x0100 | ||
88 | #define RL5C4XX_MISC_VPPEN_POL 0x0200 | ||
89 | #define RL5C46X_MISC_SUSPEND 0x0001 | ||
90 | #define RL5C46X_MISC_PWR_SAVE_2 0x0004 | ||
91 | #define RL5C46X_MISC_IFACE_BUSY 0x0008 | ||
92 | #define RL5C46X_MISC_B_LOCK 0x0010 | ||
93 | #define RL5C46X_MISC_A_LOCK 0x0020 | ||
94 | #define RL5C46X_MISC_PCI_LOCK 0x0040 | ||
95 | #define RL5C47X_MISC_IFACE_BUSY 0x0004 | ||
96 | #define RL5C47X_MISC_PCI_INT_MASK 0x0018 | ||
97 | #define RL5C47X_MISC_PCI_INT_DIS 0x0020 | ||
98 | #define RL5C47X_MISC_SUBSYS_WR 0x0040 | ||
99 | #define RL5C47X_MISC_SRIRQ_ENA 0x0080 | ||
100 | #define RL5C47X_MISC_5V_DISABLE 0x0400 | ||
101 | #define RL5C47X_MISC_LED_POL 0x0800 | ||
102 | |||
103 | /* 16-bit Interface Control Register */ | ||
104 | #define RL5C4XX_16BIT_CTL 0x0084 /* 16 bit */ | ||
105 | #define RL5C4XX_16CTL_IO_TIMING 0x0100 | ||
106 | #define RL5C4XX_16CTL_MEM_TIMING 0x0200 | ||
107 | #define RL5C46X_16CTL_LEVEL_1 0x0010 | ||
108 | #define RL5C46X_16CTL_LEVEL_2 0x0020 | ||
109 | |||
110 | /* 16-bit IO and memory timing registers */ | ||
111 | #define RL5C4XX_16BIT_IO_0 0x0088 /* 16 bit */ | ||
112 | #define RL5C4XX_16BIT_MEM_0 0x008a /* 16 bit */ | ||
113 | #define RL5C4XX_SETUP_MASK 0x0007 | ||
114 | #define RL5C4XX_SETUP_SHIFT 0 | ||
115 | #define RL5C4XX_CMD_MASK 0x01f0 | ||
116 | #define RL5C4XX_CMD_SHIFT 4 | ||
117 | #define RL5C4XX_HOLD_MASK 0x1c00 | ||
118 | #define RL5C4XX_HOLD_SHIFT 10 | ||
119 | #define RL5C4XX_MISC_CONTROL 0x2F /* 8 bit */ | ||
120 | #define RL5C4XX_ZV_ENABLE 0x08 | ||
121 | |||
122 | #ifdef __YENTA_H | ||
123 | |||
124 | #define rl_misc(socket) ((socket)->private[0]) | ||
125 | #define rl_ctl(socket) ((socket)->private[1]) | ||
126 | #define rl_io(socket) ((socket)->private[2]) | ||
127 | #define rl_mem(socket) ((socket)->private[3]) | ||
128 | #define rl_config(socket) ((socket)->private[4]) | ||
129 | |||
130 | static void ricoh_zoom_video(struct pcmcia_socket *sock, int onoff) | ||
131 | { | ||
132 | u8 reg; | ||
133 | struct yenta_socket *socket = container_of(sock, struct yenta_socket, socket); | ||
134 | |||
135 | reg = config_readb(socket, RL5C4XX_MISC_CONTROL); | ||
136 | if (onoff) | ||
137 | /* Zoom zoom, we will all go together, zoom zoom, zoom zoom */ | ||
138 | reg |= RL5C4XX_ZV_ENABLE; | ||
139 | else | ||
140 | reg &= ~RL5C4XX_ZV_ENABLE; | ||
141 | |||
142 | config_writeb(socket, RL5C4XX_MISC_CONTROL, reg); | ||
143 | } | ||
144 | |||
145 | static void ricoh_set_zv(struct yenta_socket *socket) | ||
146 | { | ||
147 | if(socket->dev->vendor == PCI_VENDOR_ID_RICOH) | ||
148 | { | ||
149 | switch(socket->dev->device) | ||
150 | { | ||
151 | /* There may be more .. */ | ||
152 | case PCI_DEVICE_ID_RICOH_RL5C478: | ||
153 | socket->socket.zoom_video = ricoh_zoom_video; | ||
154 | break; | ||
155 | } | ||
156 | } | ||
157 | } | ||
158 | |||
159 | static void ricoh_save_state(struct yenta_socket *socket) | ||
160 | { | ||
161 | rl_misc(socket) = config_readw(socket, RL5C4XX_MISC); | ||
162 | rl_ctl(socket) = config_readw(socket, RL5C4XX_16BIT_CTL); | ||
163 | rl_io(socket) = config_readw(socket, RL5C4XX_16BIT_IO_0); | ||
164 | rl_mem(socket) = config_readw(socket, RL5C4XX_16BIT_MEM_0); | ||
165 | rl_config(socket) = config_readw(socket, RL5C4XX_CONFIG); | ||
166 | } | ||
167 | |||
168 | static void ricoh_restore_state(struct yenta_socket *socket) | ||
169 | { | ||
170 | config_writew(socket, RL5C4XX_MISC, rl_misc(socket)); | ||
171 | config_writew(socket, RL5C4XX_16BIT_CTL, rl_ctl(socket)); | ||
172 | config_writew(socket, RL5C4XX_16BIT_IO_0, rl_io(socket)); | ||
173 | config_writew(socket, RL5C4XX_16BIT_MEM_0, rl_mem(socket)); | ||
174 | config_writew(socket, RL5C4XX_CONFIG, rl_config(socket)); | ||
175 | } | ||
176 | |||
177 | |||
178 | /* | ||
179 | * Magic Ricoh initialization code.. | ||
180 | */ | ||
181 | static int ricoh_override(struct yenta_socket *socket) | ||
182 | { | ||
183 | u16 config, ctl; | ||
184 | |||
185 | config = config_readw(socket, RL5C4XX_CONFIG); | ||
186 | |||
187 | /* Set the default timings, don't trust the original values */ | ||
188 | ctl = RL5C4XX_16CTL_IO_TIMING | RL5C4XX_16CTL_MEM_TIMING; | ||
189 | |||
190 | if(socket->dev->device < PCI_DEVICE_ID_RICOH_RL5C475) { | ||
191 | ctl |= RL5C46X_16CTL_LEVEL_1 | RL5C46X_16CTL_LEVEL_2; | ||
192 | } else { | ||
193 | config |= RL5C4XX_CONFIG_PREFETCH; | ||
194 | } | ||
195 | |||
196 | config_writew(socket, RL5C4XX_16BIT_CTL, ctl); | ||
197 | config_writew(socket, RL5C4XX_CONFIG, config); | ||
198 | |||
199 | ricoh_set_zv(socket); | ||
200 | |||
201 | return 0; | ||
202 | } | ||
203 | |||
204 | #endif /* CONFIG_CARDBUS */ | ||
205 | |||
206 | #endif /* _LINUX_RICOH_H */ | ||