[PATCH] sundance: remove if (1) { ... } block in sundance_probe1

Remove an if (1) { ... } block in sundance_probe1.  Its purpose seems
to be only to allow for delaring some extra local variables.  But, it also
adds ugly indentation without adding any meaning to the code.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

1 files changed, 21 insertions, 23 deletions

diff --git a/drivers/net/sundance.c b/drivers/net/sundance.c
index e148a721207..8c4eb11ab44 100644
--- a/drivers/net/sundance.c
+++ b/drivers/net/sundance.c
@@ -518,6 +518,7 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
 #else
         int bar = 1;
 #endif
+        int phy, phy_idx = 0;
 
 
 /* when built into the kernel, we only print version if device is found */
@@ -606,33 +607,30 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
                         printk("%2.2x:", dev->dev_addr[i]);
         printk("%2.2x, IRQ %d.\n", dev->dev_addr[i], irq);
 
-        if (1) {
-                int phy, phy_idx = 0;
-                np->phys[0] = 1;                /* Default setting */
-                np->mii_preamble_required++;
-                for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
-                        int mii_status = mdio_read(dev, phy, MII_BMSR);
-                        if (mii_status != 0xffff  &&  mii_status != 0x0000) {
-                                np->phys[phy_idx++] = phy;
-                                np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
-                                if ((mii_status & 0x0040) == 0)
-                                        np->mii_preamble_required++;
-                                printk(KERN_INFO "%s: MII PHY found at address %d, status "
-                                           "0x%4.4x advertising %4.4x.\n",
-                                           dev->name, phy, mii_status, np->mii_if.advertising);
-                        }
-                }
-                np->mii_preamble_required--;
-
-                if (phy_idx == 0) {
-                        printk(KERN_INFO "%s: No MII transceiver found, aborting.  ASIC status %x\n",
-                                   dev->name, ioread32(ioaddr + ASICCtrl));
-                        goto err_out_unregister;
+        np->phys[0] = 1;                /* Default setting */
+        np->mii_preamble_required++;
+        for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
+                int mii_status = mdio_read(dev, phy, MII_BMSR);
+                if (mii_status != 0xffff  &&  mii_status != 0x0000) {
+                        np->phys[phy_idx++] = phy;
+                        np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
+                        if ((mii_status & 0x0040) == 0)
+                                np->mii_preamble_required++;
+                        printk(KERN_INFO "%s: MII PHY found at address %d, status "
+                                   "0x%4.4x advertising %4.4x.\n",
+                                   dev->name, phy, mii_status, np->mii_if.advertising);
                 }
+        }
+        np->mii_preamble_required--;
 
-                np->mii_if.phy_id = np->phys[0];
+        if (phy_idx == 0) {
+                printk(KERN_INFO "%s: No MII transceiver found, aborting.  ASIC status %x\n",
+                           dev->name, ioread32(ioaddr + ASICCtrl));
+                goto err_out_unregister;
         }
 
+        np->mii_if.phy_id = np->phys[0];
+
         /* Parse override configuration */
         np->an_enable = 1;
         if (card_idx < MAX_UNITS) {