bnx2x: Re-arrange the link structures for better alignment

Change ieee_fc to u16 instead of u32 and re-arrange the link parameters
structures

Signed-off-by: Yitchak Gertner <gertner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 22 insertions, 15 deletions

diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index c163c42bc1f..74f4d1085a3 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -1347,7 +1347,7 @@ static void bnx2x_set_brcm_cl37_advertisment(struct link_params *params)
                               MDIO_OVER_1G_UP3, 0x400);
 }
 
-static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
+static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u16 *ieee_fc)
 {
         *ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
         /* resolve pause mode and advertisement
@@ -1381,7 +1381,7 @@ static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u32 *ieee_fc)
 }
 
 static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
-                                           u32 ieee_fc)
+                                           u16 ieee_fc)
 {
         struct bnx2x *bp = params->bp;
         /* for AN, we are always publishing full duplex */
@@ -1389,7 +1389,7 @@ static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
         CL45_WR_OVER_CL22(bp, params->port,
                               params->phy_addr,
                               MDIO_REG_BANK_COMBO_IEEE0,
-                              MDIO_COMBO_IEEE0_AUTO_NEG_ADV, (u16)ieee_fc);
+                              MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc);
 }
 
 static void bnx2x_restart_autoneg(struct link_params *params, u8 enable_cl73)
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index 6d26d6c524b..e0d7eef1ced 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -81,6 +81,11 @@ struct link_params {
 #define SWITCH_CFG_AUTO_DETECT  PORT_FEATURE_CON_SWITCH_AUTO_DETECT
 
         u16 hw_led_mode; /* part of the hw_config read from the shmem */
+
+        /* phy_addr populated by the phy_init function */
+        u8 phy_addr;
+        /*u8 reserved1;*/
+
         u32 lane_config;
         u32 ext_phy_config;
 #define XGXS_EXT_PHY_TYPE(ext_phy_config)       (ext_phy_config & \
@@ -90,39 +95,41 @@ struct link_params {
         /* Phy register parameter */
         u32 chip_id;
 
-        /* phy_addr populated by the CLC */
-        u8 phy_addr;
         u16 xgxs_config_rx[4]; /* preemphasis values for the rx side */
-
         u16 xgxs_config_tx[4]; /* preemphasis values for the tx side */
+
         u32 feature_config_flags;
 #define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
 #define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2)
 #define FEATURE_CONFIG_BCM8727_NOC                      (1<<3)
+
         /* Device pointer passed to all callback functions */
         struct bnx2x *bp;
 };
 
 /* Output parameters */
 struct link_vars {
+        u8 phy_flags;
+
+        u8 mac_type;
+#define MAC_TYPE_NONE           0
+#define MAC_TYPE_EMAC           1
+#define MAC_TYPE_BMAC           2
+
         u8 phy_link_up; /* internal phy link indication */
         u8 link_up;
+
+        u16 line_speed;
         u16 duplex;
+
         u16 flow_ctrl;
-        u32 ieee_fc;
-        u8 mac_type;
+        u16 ieee_fc;
 
-#define MAC_TYPE_NONE   0
-#define MAC_TYPE_EMAC   1
-#define MAC_TYPE_BMAC   2
-        u16 line_speed;
         u32 autoneg;
 #define AUTO_NEG_DISABLED                       0x0
 #define AUTO_NEG_ENABLED                        0x1
 #define AUTO_NEG_COMPLETE                       0x2
-#define AUTO_NEG_PARALLEL_DETECTION_USED        0x3
-
-        u8 phy_flags;
+#define AUTO_NEG_PARALLEL_DETECTION_USED        0x3
 
         /* The same definitions as the shmem parameter */
         u32 link_status;