b43: Only select allowed TX and RX antennas

This fixes antenna selection in b43. It adds a sanity check
for the antenna numbers we get from mac80211.

This patch depends on
ssb: Fix extraction of values from SPROM

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

3 files changed, 42 insertions, 12 deletions

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 68bbe8eafd6..f4c14272332 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2692,8 +2692,36 @@ static int b43_switch_phymode(struct b43_wl *wl, unsigned int new_mode)
         return err;
 }
 
-static int b43_antenna_from_ieee80211(u8 antenna)
+/* Check if the use of the antenna that ieee80211 told us to
+ * use is possible. This will fall back to DEFAULT.
+ * "antenna_nr" is the antenna identifier we got from ieee80211. */
+u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
+                                  u8 antenna_nr)
 {
+        u8 antenna_mask;
+
+        if (antenna_nr == 0) {
+                /* Zero means "use default antenna". That's always OK. */
+                return 0;
+        }
+
+        /* Get the mask of available antennas. */
+        if (dev->phy.gmode)
+                antenna_mask = dev->dev->bus->sprom.ant_available_bg;
+        else
+                antenna_mask = dev->dev->bus->sprom.ant_available_a;
+
+        if (!(antenna_mask & (1 << (antenna_nr - 1)))) {
+                /* This antenna is not available. Fall back to default. */
+                return 0;
+        }
+
+        return antenna_nr;
+}
+
+static int b43_antenna_from_ieee80211(struct b43_wldev *dev, u8 antenna)
+{
+        antenna = b43_ieee80211_antenna_sanitize(dev, antenna);
         switch (antenna) {
         case 0:         /* default/diversity */
                 return B43_ANTENNA_DEFAULT;
@@ -2713,14 +2741,10 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
         struct b43_phy *phy;
         unsigned long flags;
         unsigned int new_phymode = 0xFFFF;
-        int antenna_tx;
-        int antenna_rx;
+        int antenna;
         int err = 0;
         u32 savedirqs;
 
-        antenna_tx = b43_antenna_from_ieee80211(conf->antenna_sel_tx);
-        antenna_rx = b43_antenna_from_ieee80211(conf->antenna_sel_rx);
-
         mutex_lock(&wl->mutex);
 
         /* Switch the PHY mode (if necessary). */
@@ -2781,8 +2805,10 @@ static int b43_op_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
         }
 
         /* Antennas for RX and management frame TX. */
-        b43_mgmtframe_txantenna(dev, antenna_tx);
-        b43_set_rx_antenna(dev, antenna_rx);
+        antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_tx);
+        b43_mgmtframe_txantenna(dev, antenna);
+        antenna = b43_antenna_from_ieee80211(dev, conf->antenna_sel_rx);
+        b43_set_rx_antenna(dev, antenna);
 
         /* Update templates for AP mode. */
         if (b43_is_mode(wl, IEEE80211_IF_TYPE_AP))
diff --git a/drivers/net/wireless/b43/main.h b/drivers/net/wireless/b43/main.h
index a8503ef4ebc..2d52d9de930 100644
--- a/drivers/net/wireless/b43/main.h
+++ b/drivers/net/wireless/b43/main.h
@@ -84,6 +84,9 @@ static inline int b43_is_ofdm_rate(int rate)
         return !b43_is_cck_rate(rate);
 }
 
+u8 b43_ieee80211_antenna_sanitize(struct b43_wldev *dev,
+                                  u8 antenna_nr);
+
 void b43_tsf_read(struct b43_wldev *dev, u64 * tsf);
 void b43_tsf_write(struct b43_wldev *dev, u64 tsf);
 
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index e60e54d59ab..3d312768588 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -270,14 +270,15 @@ static void generate_txhdr_fw4(struct b43_wldev *dev,
                 phy_ctl |= B43_TX4_PHY_OFDM;
         if (dev->short_preamble)
                 phy_ctl |= B43_TX4_PHY_SHORTPRMBL;
-        switch (txctl->antenna_sel_tx) {
-        case 0:
+
+        switch (b43_ieee80211_antenna_sanitize(dev, txctl->antenna_sel_tx)) {
+        case 0: /* Default */
                 phy_ctl |= B43_TX4_PHY_ANTLAST;
                 break;
-        case 1:
+        case 1: /* Antenna 0 */
                 phy_ctl |= B43_TX4_PHY_ANT0;
                 break;
-        case 2:
+        case 2: /* Antenna 1 */
                 phy_ctl |= B43_TX4_PHY_ANT1;
                 break;
         default: