rt2x00: Driver requiring firmware should select crc algo

The driver should select what CRC algorithm is required
when performing a checksum on the firmware.

rt61pci & rt73usb require crc-itu-t
rt2800pci & rt2800usb require crc-ccitt

Legacy 2800pci/usb driver uses crc-itu-t + bit order reversion,
but that is just inefficient especially since the end result is
the same as a different algorithm which is also available as library. ;)

Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 2 insertions, 1 deletions

diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index 5e08541958c..b5ab771bbac 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2258,9 +2258,10 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
         rt61pci_probe_hw_mode(rt2x00dev);
 
         /*
-         * This device requires firmware
+         * This device requires firmware.
          */
         __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+        __set_bit(DRIVER_REQUIRE_FIRMWARE_CRC_ITU_T, &rt2x00dev->flags);
 
         /*
          * Set the rssi offset.