iwlwifi: move RX handlers to iwl-rx.c

This patch moves RX handlers to iwl-rx.c

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 2 insertions, 150 deletions

diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c
index a607b39223e..499705ff888 100644
--- a/drivers/net/wireless/iwlwifi/iwl4965-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c
@@ -613,36 +613,6 @@ static void iwl4965_activate_qos(struct iwl_priv *priv, u8 force)
         }
 }
 
-int iwl4965_is_network_packet(struct iwl_priv *priv, struct ieee80211_hdr *header)
-{
-        /* Filter incoming packets to determine if they are targeted toward
-         * this network, discarding packets coming from ourselves */
-        switch (priv->iw_mode) {
-        case IEEE80211_IF_TYPE_IBSS: /* Header: Dest. | Source    | BSSID */
-                /* packets from our adapter are dropped (echo) */
-                if (!compare_ether_addr(header->addr2, priv->mac_addr))
-                        return 0;
-                /* {broad,multi}cast packets to our IBSS go through */
-                if (is_multicast_ether_addr(header->addr1))
-                        return !compare_ether_addr(header->addr3, priv->bssid);
-                /* packets to our adapter go through */
-                return !compare_ether_addr(header->addr1, priv->mac_addr);
-        case IEEE80211_IF_TYPE_STA: /* Header: Dest. | AP{BSSID} | Source */
-                /* packets from our adapter are dropped (echo) */
-                if (!compare_ether_addr(header->addr3, priv->mac_addr))
-                        return 0;
-                /* {broad,multi}cast packets to our BSS go through */
-                if (is_multicast_ether_addr(header->addr1))
-                        return !compare_ether_addr(header->addr2, priv->bssid);
-                /* packets to our adapter go through */
-                return !compare_ether_addr(header->addr1, priv->mac_addr);
-        default:
-                break;
-        }
-
-        return 1;
-}
-
 static void iwl4965_sequence_reset(struct iwl_priv *priv)
 {
         /* Reset ieee stats */
@@ -906,72 +876,6 @@ static void iwl4965_set_rate(struct iwl_priv *priv)
                    (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
 }
 
-#define IWL_PACKET_RETRY_TIME HZ
-
-int iwl4965_is_duplicate_packet(struct iwl_priv *priv, struct ieee80211_hdr *header)
-{
-        u16 sc = le16_to_cpu(header->seq_ctrl);
-        u16 seq = (sc & IEEE80211_SCTL_SEQ) >> 4;
-        u16 frag = sc & IEEE80211_SCTL_FRAG;
-        u16 *last_seq, *last_frag;
-        unsigned long *last_time;
-
-        switch (priv->iw_mode) {
-        case IEEE80211_IF_TYPE_IBSS:{
-                struct list_head *p;
-                struct iwl4965_ibss_seq *entry = NULL;
-                u8 *mac = header->addr2;
-                int index = mac[5] & (IWL_IBSS_MAC_HASH_SIZE - 1);
-
-                __list_for_each(p, &priv->ibss_mac_hash[index]) {
-                        entry = list_entry(p, struct iwl4965_ibss_seq, list);
-                        if (!compare_ether_addr(entry->mac, mac))
-                                break;
-                }
-                if (p == &priv->ibss_mac_hash[index]) {
-                        entry = kzalloc(sizeof(*entry), GFP_ATOMIC);
-                        if (!entry) {
-                                IWL_ERROR("Cannot malloc new mac entry\n");
-                                return 0;
-                        }
-                        memcpy(entry->mac, mac, ETH_ALEN);
-                        entry->seq_num = seq;
-                        entry->frag_num = frag;
-                        entry->packet_time = jiffies;
-                        list_add(&entry->list, &priv->ibss_mac_hash[index]);
-                        return 0;
-                }
-                last_seq = &entry->seq_num;
-                last_frag = &entry->frag_num;
-                last_time = &entry->packet_time;
-                break;
-        }
-        case IEEE80211_IF_TYPE_STA:
-                last_seq = &priv->last_seq_num;
-                last_frag = &priv->last_frag_num;
-                last_time = &priv->last_packet_time;
-                break;
-        default:
-                return 0;
-        }
-        if ((*last_seq == seq) &&
-            time_after(*last_time + IWL_PACKET_RETRY_TIME, jiffies)) {
-                if (*last_frag == frag)
-                        goto drop;
-                if (*last_frag + 1 != frag)
-                        /* out-of-order fragment */
-                        goto drop;
-        } else
-                *last_seq = seq;
-
-        *last_frag = frag;
-        *last_time = jiffies;
-        return 0;
-
- drop:
-        return 1;
-}
-
 #ifdef CONFIG_IWL4965_SPECTRUM_MEASUREMENT
 
 #include "iwl-spectrum.h"
@@ -1350,17 +1254,6 @@ static void iwl4965_rx_card_state_notif(struct iwl_priv *priv,
                 wake_up_interruptible(&priv->wait_command_queue);
 }
 
-/* Cache phy data (Rx signal strength, etc) for HT frame (REPLY_RX_PHY_CMD).
- * This will be used later in iwl4965_rx_reply_rx() for REPLY_RX_MPDU_CMD. */
-static void iwl4965_rx_reply_rx_phy(struct iwl_priv *priv,
-                                    struct iwl_rx_mem_buffer *rxb)
-{
-        struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
-        priv->last_phy_res[0] = 1;
-        memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
-               sizeof(struct iwl4965_rx_phy_res));
-}
-
 /**
  * iwl4965_setup_rx_handlers - Initialize Rx handler callbacks
  *
@@ -1398,8 +1291,8 @@ static void iwl4965_setup_rx_handlers(struct iwl_priv *priv)
         priv->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
             iwl_rx_missed_beacon_notif;
         /* Rx handlers */
-        priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl4965_rx_reply_rx_phy;
-        priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl4965_rx_reply_rx;
+        priv->rx_handlers[REPLY_RX_PHY_CMD] = iwl_rx_reply_rx_phy;
+        priv->rx_handlers[REPLY_RX_MPDU_CMD] = iwl_rx_reply_rx;
         /* Set up hardware specific Rx handlers */
         priv->cfg->ops->lib->rx_handler_setup(priv);
 }
@@ -1530,47 +1423,6 @@ void iwl_rx_handle(struct iwl_priv *priv)
         iwl_rx_queue_restock(priv);
 }
 
-#define PERFECT_RSSI (-20) /* dBm */
-#define WORST_RSSI (-95)   /* dBm */
-#define RSSI_RANGE (PERFECT_RSSI - WORST_RSSI)
-
-/* Calculate an indication of rx signal quality (a percentage, not dBm!).
- * See http://www.ces.clemson.edu/linux/signal_quality.shtml for info
- *   about formulas used below. */
-int iwl4965_calc_sig_qual(int rssi_dbm, int noise_dbm)
-{
-        int sig_qual;
-        int degradation = PERFECT_RSSI - rssi_dbm;
-
-        /* If we get a noise measurement, use signal-to-noise ratio (SNR)
-         * as indicator; formula is (signal dbm - noise dbm).
-         * SNR at or above 40 is a great signal (100%).
-         * Below that, scale to fit SNR of 0 - 40 dB within 0 - 100% indicator.
-         * Weakest usable signal is usually 10 - 15 dB SNR. */
-        if (noise_dbm) {
-                if (rssi_dbm - noise_dbm >= 40)
-                        return 100;
-                else if (rssi_dbm < noise_dbm)
-                        return 0;
-                sig_qual = ((rssi_dbm - noise_dbm) * 5) / 2;
-
-        /* Else use just the signal level.
-         * This formula is a least squares fit of data points collected and
-         *   compared with a reference system that had a percentage (%) display
-         *   for signal quality. */
-        } else
-                sig_qual = (100 * (RSSI_RANGE * RSSI_RANGE) - degradation *
-                            (15 * RSSI_RANGE + 62 * degradation)) /
-                           (RSSI_RANGE * RSSI_RANGE);
-
-        if (sig_qual > 100)
-                sig_qual = 100;
-        else if (sig_qual < 1)
-                sig_qual = 0;
-
-        return sig_qual;
-}
-
 #ifdef CONFIG_IWLWIFI_DEBUG
 static void iwl4965_print_rx_config_cmd(struct iwl_priv *priv)
 {