Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 152 insertions, 0 deletions

diff --git a/drivers/net/wan/wanxl.h b/drivers/net/wan/wanxl.h
new file mode 100644
index 00000000000..3f86558f8a6
--- /dev/null
+++ b/drivers/net/wan/wanxl.h
@@ -0,0 +1,152 @@
+/*
+ * wanXL serial card driver for Linux
+ * definitions common to host driver and card firmware
+ *
+ * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ */
+
+#define RESET_WHILE_LOADING 0
+
+/* you must rebuild the firmware if any of the following is changed */
+#define DETECT_RAM 0            /* needed for > 4MB RAM, 16 MB maximum */
+#define QUICC_MEMCPY_USES_PLX 1 /* must be used if the host has > 256 MB RAM */
+
+
+#define STATUS_CABLE_V35        2
+#define STATUS_CABLE_X21        3
+#define STATUS_CABLE_V24        4
+#define STATUS_CABLE_EIA530     5
+#define STATUS_CABLE_INVALID    6
+#define STATUS_CABLE_NONE       7
+
+#define STATUS_CABLE_DCE        0x8000
+#define STATUS_CABLE_DSR        0x0010
+#define STATUS_CABLE_DCD        0x0008
+#define STATUS_CABLE_PM_SHIFT   5
+
+#define PDM_OFFSET 0x1000
+
+#define TX_BUFFERS 10           /* per port */
+#define RX_BUFFERS 30
+#define RX_QUEUE_LENGTH 40      /* card->host queue length - per card */
+
+#define PACKET_EMPTY            0x00
+#define PACKET_FULL             0x10
+#define PACKET_SENT             0x20 /* TX only */
+#define PACKET_UNDERRUN         0x30 /* TX only */
+#define PACKET_PORT_MASK        0x03 /* RX only */
+
+/* bit numbers in PLX9060 doorbell registers */
+#define DOORBELL_FROM_CARD_TX_0         0 /* packet sent by the card */
+#define DOORBELL_FROM_CARD_TX_1         1
+#define DOORBELL_FROM_CARD_TX_2         2
+#define DOORBELL_FROM_CARD_TX_3         3
+#define DOORBELL_FROM_CARD_RX           4
+#define DOORBELL_FROM_CARD_CABLE_0      5 /* cable/PM/etc. changed */
+#define DOORBELL_FROM_CARD_CABLE_1      6
+#define DOORBELL_FROM_CARD_CABLE_2      7
+#define DOORBELL_FROM_CARD_CABLE_3      8
+
+#define DOORBELL_TO_CARD_OPEN_0         0
+#define DOORBELL_TO_CARD_OPEN_1         1
+#define DOORBELL_TO_CARD_OPEN_2         2
+#define DOORBELL_TO_CARD_OPEN_3         3
+#define DOORBELL_TO_CARD_CLOSE_0        4
+#define DOORBELL_TO_CARD_CLOSE_1        5
+#define DOORBELL_TO_CARD_CLOSE_2        6
+#define DOORBELL_TO_CARD_CLOSE_3        7
+#define DOORBELL_TO_CARD_TX_0           8 /* outbound packet queued */
+#define DOORBELL_TO_CARD_TX_1           9
+#define DOORBELL_TO_CARD_TX_2           10
+#define DOORBELL_TO_CARD_TX_3           11
+
+/* firmware-only status bits, starting from last DOORBELL_TO_CARD + 1 */
+#define TASK_SCC_0                      12
+#define TASK_SCC_1                      13
+#define TASK_SCC_2                      14
+#define TASK_SCC_3                      15
+
+#define ALIGN32(x) (((x) + 3) & 0xFFFFFFFC)
+#define BUFFER_LENGTH   ALIGN32(HDLC_MAX_MRU + 4) /* 4 bytes for 32-bit CRC */
+
+/* Address of TX and RX buffers in 68360 address space */
+#define BUFFERS_ADDR    0x4000  /* 16 KB */
+
+#ifndef __ASSEMBLER__
+#define PLX_OFFSET              0
+#else
+#define PLX_OFFSET              PLX + 0x80
+#endif
+
+#define PLX_MAILBOX_0           (PLX_OFFSET + 0x40)
+#define PLX_MAILBOX_1           (PLX_OFFSET + 0x44)
+#define PLX_MAILBOX_2           (PLX_OFFSET + 0x48)
+#define PLX_MAILBOX_3           (PLX_OFFSET + 0x4C)
+#define PLX_MAILBOX_4           (PLX_OFFSET + 0x50)
+#define PLX_MAILBOX_5           (PLX_OFFSET + 0x54)
+#define PLX_MAILBOX_6           (PLX_OFFSET + 0x58)
+#define PLX_MAILBOX_7           (PLX_OFFSET + 0x5C)
+#define PLX_DOORBELL_TO_CARD    (PLX_OFFSET + 0x60)
+#define PLX_DOORBELL_FROM_CARD  (PLX_OFFSET + 0x64)
+#define PLX_INTERRUPT_CS        (PLX_OFFSET + 0x68)
+#define PLX_CONTROL             (PLX_OFFSET + 0x6C)
+
+#ifdef __ASSEMBLER__
+#define PLX_DMA_0_MODE          (PLX + 0x100)
+#define PLX_DMA_0_PCI           (PLX + 0x104)
+#define PLX_DMA_0_LOCAL         (PLX + 0x108)
+#define PLX_DMA_0_LENGTH        (PLX + 0x10C)
+#define PLX_DMA_0_DESC          (PLX + 0x110)
+#define PLX_DMA_1_MODE          (PLX + 0x114)
+#define PLX_DMA_1_PCI           (PLX + 0x118)
+#define PLX_DMA_1_LOCAL         (PLX + 0x11C)
+#define PLX_DMA_1_LENGTH        (PLX + 0x120)
+#define PLX_DMA_1_DESC          (PLX + 0x124)
+#define PLX_DMA_CMD_STS         (PLX + 0x128)
+#define PLX_DMA_ARBITR_0        (PLX + 0x12C)
+#define PLX_DMA_ARBITR_1        (PLX + 0x130)
+#endif
+
+#define DESC_LENGTH 12
+
+/* offsets from start of status_t */
+/* card to host */
+#define STATUS_OPEN             0
+#define STATUS_CABLE            (STATUS_OPEN + 4)
+#define STATUS_RX_OVERRUNS      (STATUS_CABLE + 4)
+#define STATUS_RX_FRAME_ERRORS  (STATUS_RX_OVERRUNS + 4)
+
+/* host to card */
+#define STATUS_PARITY           (STATUS_RX_FRAME_ERRORS + 4)
+#define STATUS_ENCODING         (STATUS_PARITY + 4)
+#define STATUS_CLOCKING         (STATUS_ENCODING + 4)
+#define STATUS_TX_DESCS         (STATUS_CLOCKING + 4)
+
+#ifndef __ASSEMBLER__
+
+typedef struct {
+        volatile u32 stat;
+        u32 address;            /* PCI address */
+        volatile u32 length;
+}desc_t;
+
+
+typedef struct {
+// Card to host
+        volatile u32 open;
+        volatile u32 cable;
+        volatile u32 rx_overruns;
+        volatile u32 rx_frame_errors;
+
+// Host to card
+        u32 parity;
+        u32 encoding;
+        u32 clocking;
+        desc_t tx_descs[TX_BUFFERS];
+}port_status_t;
+
+#endif /* __ASSEMBLER__ */