[TG3]: Add 5709 PHY support.

Add support for the 5709 10/100 PHY.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 6 insertions, 0 deletions

diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 2f5e00c9601..9259d12fabd 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1624,6 +1624,7 @@
 #define MII_TG3_DSP_RW_PORT             0x15 /* DSP coefficient read/write port */
 
 #define MII_TG3_DSP_ADDRESS             0x17 /* DSP address register */
+#define MII_TG3_EPHY_PTEST              0x17 /* 5906 PHY register */
 
 #define MII_TG3_AUX_CTRL                0x18 /* auxilliary control register */
 
@@ -1637,6 +1638,8 @@
 #define MII_TG3_AUX_STAT_100FULL        0x0500
 #define MII_TG3_AUX_STAT_1000HALF       0x0600
 #define MII_TG3_AUX_STAT_1000FULL       0x0700
+#define MII_TG3_AUX_STAT_100            0x0008
+#define MII_TG3_AUX_STAT_FULL           0x0001
 
 #define MII_TG3_ISTAT                   0x1a /* IRQ status register */
 #define MII_TG3_IMASK                   0x1b /* IRQ mask register */
@@ -1647,6 +1650,9 @@
 #define MII_TG3_INT_DUPLEXCHG           0x0008
 #define MII_TG3_INT_ANEG_PAGE_RX        0x0400
 
+#define MII_TG3_EPHY_TEST               0x1f /* 5906 PHY register */
+#define MII_TG3_EPHY_SHADOW_EN          0x80
+
 /* There are two ways to manage the TX descriptors on the tigon3.
  * Either the descriptors are in host DMA'able memory, or they
  * exist only in the cards on-chip SRAM.  All 16 send bds are under