[PATCH] skge: better flow control negotiation

Do flow control negotiation properly. Don't let auto negotiation
status limit renegotiation. Separate desired pause values from
the result of auto negotiation.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 78 insertions, 51 deletions

diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index c19f49bce7a..d844a837a8f 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -487,31 +487,37 @@ static void skge_get_pauseparam(struct net_device *dev,
 {
         struct skge_port *skge = netdev_priv(dev);
 
-        ecmd->tx_pause = (skge->flow_control == FLOW_MODE_LOC_SEND)
-                || (skge->flow_control == FLOW_MODE_SYMMETRIC);
-        ecmd->rx_pause = (skge->flow_control == FLOW_MODE_REM_SEND)
-                || (skge->flow_control == FLOW_MODE_SYMMETRIC);
+        ecmd->rx_pause = (skge->flow_control == FLOW_MODE_SYMMETRIC)
+                || (skge->flow_control == FLOW_MODE_SYM_OR_REM);
+        ecmd->tx_pause = ecmd->rx_pause || (skge->flow_control == FLOW_MODE_LOC_SEND);
 
-        ecmd->autoneg = skge->autoneg;
+        ecmd->autoneg = ecmd->rx_pause || ecmd->tx_pause;
 }
 
 static int skge_set_pauseparam(struct net_device *dev,
                                struct ethtool_pauseparam *ecmd)
 {
         struct skge_port *skge = netdev_priv(dev);
+        struct ethtool_pauseparam old;
 
-        skge->autoneg = ecmd->autoneg;
-        if (ecmd->rx_pause && ecmd->tx_pause)
-                skge->flow_control = FLOW_MODE_SYMMETRIC;
-        else if (ecmd->rx_pause && !ecmd->tx_pause)
-                skge->flow_control = FLOW_MODE_REM_SEND;
-        else if (!ecmd->rx_pause && ecmd->tx_pause)
-                skge->flow_control = FLOW_MODE_LOC_SEND;
-        else
-                skge->flow_control = FLOW_MODE_NONE;
+        skge_get_pauseparam(dev, &old);
+
+        if (ecmd->autoneg != old.autoneg)
+                skge->flow_control = ecmd->autoneg ? FLOW_MODE_NONE : FLOW_MODE_SYMMETRIC;
+        else {
+                if (ecmd->rx_pause && ecmd->tx_pause)
+                        skge->flow_control = FLOW_MODE_SYMMETRIC;
+                else if (ecmd->rx_pause && !ecmd->tx_pause)
+                        skge->flow_control = FLOW_MODE_SYM_OR_REM;
+                else if (!ecmd->rx_pause && ecmd->tx_pause)
+                        skge->flow_control = FLOW_MODE_LOC_SEND;
+                else
+                        skge->flow_control = FLOW_MODE_NONE;
+        }
 
         if (netif_running(dev))
                 skge_phy_reset(skge);
+
         return 0;
 }
 
@@ -854,6 +860,23 @@ static int skge_rx_fill(struct net_device *dev)
         return 0;
 }
 
+static const char *skge_pause(enum pause_status status)
+{
+        switch(status) {
+        case FLOW_STAT_NONE:
+                return "none";
+        case FLOW_STAT_REM_SEND:
+                return "rx only";
+        case FLOW_STAT_LOC_SEND:
+                return "tx_only";
+        case FLOW_STAT_SYMMETRIC:               /* Both station may send PAUSE */
+                return "both";
+        default:
+                return "indeterminated";
+        }
+}
+
+
 static void skge_link_up(struct skge_port *skge)
 {
         skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG),
@@ -862,16 +885,13 @@ static void skge_link_up(struct skge_port *skge)
         netif_carrier_on(skge->netdev);
         netif_wake_queue(skge->netdev);
 
-        if (netif_msg_link(skge))
+        if (netif_msg_link(skge)) {
                 printk(KERN_INFO PFX
                        "%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
                        skge->netdev->name, skge->speed,
                        skge->duplex == DUPLEX_FULL ? "full" : "half",
-                       (skge->flow_control == FLOW_MODE_NONE) ? "none" :
-                       (skge->flow_control == FLOW_MODE_LOC_SEND) ? "tx only" :
-                       (skge->flow_control == FLOW_MODE_REM_SEND) ? "rx only" :
-                       (skge->flow_control == FLOW_MODE_SYMMETRIC) ? "tx and rx" :
-                       "unknown");
+                       skge_pause(skge->flow_status));
+        }
 }
 
 static void skge_link_down(struct skge_port *skge)
@@ -1015,7 +1035,7 @@ static const u16 phy_pause_map[] = {
         [FLOW_MODE_NONE] =      0,
         [FLOW_MODE_LOC_SEND] =  PHY_AN_PAUSE_ASYM,
         [FLOW_MODE_SYMMETRIC] = PHY_AN_PAUSE_CAP,
-        [FLOW_MODE_REM_SEND]  = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM,
+        [FLOW_MODE_SYM_OR_REM]  = PHY_AN_PAUSE_CAP | PHY_AN_PAUSE_ASYM,
 };
 
 /* special defines for FIBER (88E1011S only) */
@@ -1023,7 +1043,7 @@ static const u16 fiber_pause_map[] = {
         [FLOW_MODE_NONE]        = PHY_X_P_NO_PAUSE,
         [FLOW_MODE_LOC_SEND]    = PHY_X_P_ASYM_MD,
         [FLOW_MODE_SYMMETRIC]   = PHY_X_P_SYM_MD,
-        [FLOW_MODE_REM_SEND]    = PHY_X_P_BOTH_MD,
+        [FLOW_MODE_SYM_OR_REM]  = PHY_X_P_BOTH_MD,
 };
 
 
@@ -1072,20 +1092,19 @@ static void bcom_check_link(struct skge_hw *hw, int port)
                         return;
                 }
 
-
                 /* We are using IEEE 802.3z/D5.0 Table 37-4 */
                 switch (aux & PHY_B_AS_PAUSE_MSK) {
                 case PHY_B_AS_PAUSE_MSK:
-                        skge->flow_control = FLOW_MODE_SYMMETRIC;
+                        skge->flow_status = FLOW_STAT_SYMMETRIC;
                         break;
                 case PHY_B_AS_PRR:
-                        skge->flow_control = FLOW_MODE_REM_SEND;
+                        skge->flow_status = FLOW_STAT_REM_SEND;
                         break;
                 case PHY_B_AS_PRT:
-                        skge->flow_control = FLOW_MODE_LOC_SEND;
+                        skge->flow_status = FLOW_STAT_LOC_SEND;
                         break;
                 default:
-                        skge->flow_control = FLOW_MODE_NONE;
+                        skge->flow_status = FLOW_STAT_NONE;
                 }
                 skge->speed = SPEED_1000;
         }
@@ -1283,15 +1302,20 @@ static void xm_check_link(struct net_device *dev)
                 }
 
                 /* We are using IEEE 802.3z/D5.0 Table 37-4 */
-                if (lpa & PHY_X_P_SYM_MD)
-                        skge->flow_control = FLOW_MODE_SYMMETRIC;
-                else if ((lpa & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD)
-                        skge->flow_control = FLOW_MODE_REM_SEND;
-                else if ((lpa & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD)
-                        skge->flow_control = FLOW_MODE_LOC_SEND;
+                if ((skge->flow_control == FLOW_MODE_SYMMETRIC ||
+                     skge->flow_control == FLOW_MODE_SYM_OR_REM) &&
+                    (lpa & PHY_X_P_SYM_MD))
+                        skge->flow_status = FLOW_STAT_SYMMETRIC;
+                else if (skge->flow_control == FLOW_MODE_SYM_OR_REM &&
+                         (lpa & PHY_X_RS_PAUSE) == PHY_X_P_ASYM_MD)
+                        /* Enable PAUSE receive, disable PAUSE transmit */
+                        skge->flow_status  = FLOW_STAT_REM_SEND;
+                else if (skge->flow_control == FLOW_MODE_LOC_SEND &&
+                         (lpa & PHY_X_RS_PAUSE) == PHY_X_P_BOTH_MD)
+                        /* Disable PAUSE receive, enable PAUSE transmit */
+                        skge->flow_status = FLOW_STAT_LOC_SEND;
                 else
-                        skge->flow_control = FLOW_MODE_NONE;
-
+                        skge->flow_status = FLOW_STAT_NONE;
 
                 skge->speed = SPEED_1000;
         }
@@ -1602,8 +1626,8 @@ static void genesis_link_up(struct skge_port *skge)
          * enabling pause frame reception is required for 1000BT
          * because the XMAC is not reset if the link is going down
          */
-        if (skge->flow_control == FLOW_MODE_NONE ||
-            skge->flow_control == FLOW_MODE_LOC_SEND)
+        if (skge->flow_status == FLOW_STAT_NONE ||
+            skge->flow_status == FLOW_STAT_LOC_SEND)
                 /* Disable Pause Frame Reception */
                 cmd |= XM_MMU_IGN_PF;
         else
@@ -1613,8 +1637,8 @@ static void genesis_link_up(struct skge_port *skge)
         xm_write16(hw, port, XM_MMU_CMD, cmd);
 
         mode = xm_read32(hw, port, XM_MODE);
-        if (skge->flow_control == FLOW_MODE_SYMMETRIC ||
-            skge->flow_control == FLOW_MODE_LOC_SEND) {
+        if (skge->flow_status== FLOW_STAT_SYMMETRIC ||
+            skge->flow_status == FLOW_STAT_LOC_SEND) {
                 /*
                  * Configure Pause Frame Generation
                  * Use internal and external Pause Frame Generation.
@@ -1938,6 +1962,11 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
         case FLOW_MODE_LOC_SEND:
                 /* disable Rx flow-control */
                 reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS;
+                break;
+        case FLOW_MODE_SYMMETRIC:
+        case FLOW_MODE_SYM_OR_REM:
+                /* enable Tx & Rx flow-control */
+                break;
         }
 
         gma_write16(hw, port, GM_GP_CTRL, reg);
@@ -2132,13 +2161,11 @@ static void yukon_link_down(struct skge_port *skge)
         ctrl &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
         gma_write16(hw, port, GM_GP_CTRL, ctrl);
 
-        if (skge->flow_control == FLOW_MODE_REM_SEND) {
+        if (skge->flow_status == FLOW_STAT_REM_SEND) {
+                ctrl = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
+                ctrl |= PHY_M_AN_ASP;
                 /* restore Asymmetric Pause bit */
-                gm_phy_write(hw, port, PHY_MARV_AUNE_ADV,
-                                  gm_phy_read(hw, port,
-                                                   PHY_MARV_AUNE_ADV)
-                                  | PHY_M_AN_ASP);
-
+                gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, ctrl);
         }
 
         yukon_reset(hw, port);
@@ -2185,19 +2212,19 @@ static void yukon_phy_intr(struct skge_port *skge)
                 /* We are using IEEE 802.3z/D5.0 Table 37-4 */
                 switch (phystat & PHY_M_PS_PAUSE_MSK) {
                 case PHY_M_PS_PAUSE_MSK:
-                        skge->flow_control = FLOW_MODE_SYMMETRIC;
+                        skge->flow_status = FLOW_STAT_SYMMETRIC;
                         break;
                 case PHY_M_PS_RX_P_EN:
-                        skge->flow_control = FLOW_MODE_REM_SEND;
+                        skge->flow_status = FLOW_STAT_REM_SEND;
                         break;
                 case PHY_M_PS_TX_P_EN:
-                        skge->flow_control = FLOW_MODE_LOC_SEND;
+                        skge->flow_status = FLOW_STAT_LOC_SEND;
                         break;
                 default:
-                        skge->flow_control = FLOW_MODE_NONE;
+                        skge->flow_status = FLOW_STAT_NONE;
                 }
 
-                if (skge->flow_control == FLOW_MODE_NONE ||
+                if (skge->flow_status == FLOW_STAT_NONE ||
                     (skge->speed < SPEED_1000 && skge->duplex == DUPLEX_HALF))
                         skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_PAUSE_OFF);
                 else
@@ -3420,7 +3447,7 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
 
         /* Auto speed and flow control */
         skge->autoneg = AUTONEG_ENABLE;
-        skge->flow_control = FLOW_MODE_SYMMETRIC;
+        skge->flow_control = FLOW_MODE_SYM_OR_REM;
         skge->duplex = -1;
         skge->speed = -1;
         skge->advertising = skge_supported_modes(hw);