atl1: Do not use legacy PCI power management

The atl1 driver uses the legacy PCI power management, so it has to
do some PCI-specific things in its ->suspend() and ->resume()
callbacks, which isn't necessary and should better be done by the PCI
subsystem-level power management code.

Convert atl1 to the new PCI power management framework and make it
let the PCI subsystem take care of all the PCI-specific aspects of
device handling during system power transitions.

Tested-by: Thomas Fjellstrom <thomas@fjellstrom.ca>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 31 insertions, 46 deletions

diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 3b527687c28..67f40b9c16e 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -950,6 +950,7 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
         hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
 
         adapter->wol = 0;
+        device_set_wakeup_enable(&adapter->pdev->dev, false);
         adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
         adapter->ict = 50000;           /* 100ms */
         adapter->link_speed = SPEED_0;  /* hardware init */
@@ -2735,15 +2736,15 @@ static int atl1_close(struct net_device *netdev)
 }
 
 #ifdef CONFIG_PM
-static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
+static int atl1_suspend(struct device *dev)
 {
+        struct pci_dev *pdev = to_pci_dev(dev);
         struct net_device *netdev = pci_get_drvdata(pdev);
         struct atl1_adapter *adapter = netdev_priv(netdev);
         struct atl1_hw *hw = &adapter->hw;
         u32 ctrl = 0;
         u32 wufc = adapter->wol;
         u32 val;
-        int retval;
         u16 speed;
         u16 duplex;
 
@@ -2751,17 +2752,15 @@ static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
         if (netif_running(netdev))
                 atl1_down(adapter);
 
-        retval = pci_save_state(pdev);
-        if (retval)
-                return retval;
-
         atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
         atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
         val = ctrl & BMSR_LSTATUS;
         if (val)
                 wufc &= ~ATLX_WUFC_LNKC;
+        if (!wufc)
+                goto disable_wol;
 
-        if (val && wufc) {
+        if (val) {
                 val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
                 if (val) {
                         if (netif_msg_ifdown(adapter))
@@ -2798,23 +2797,18 @@ static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
                 ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
                 iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
                 ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
-
-                pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
-                goto exit;
-        }
-
-        if (!val && wufc) {
+        } else {
                 ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
                 iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
                 ioread32(hw->hw_addr + REG_WOL_CTRL);
                 iowrite32(0, hw->hw_addr + REG_MAC_CTRL);
                 ioread32(hw->hw_addr + REG_MAC_CTRL);
                 hw->phy_configured = false;
-                pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
-                goto exit;
         }
 
-disable_wol:
+        return 0;
+
+ disable_wol:
         iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
         ioread32(hw->hw_addr + REG_WOL_CTRL);
         ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
@@ -2822,37 +2816,17 @@ disable_wol:
         iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
         ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
         hw->phy_configured = false;
-        pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
-exit:
-        if (netif_running(netdev))
-                pci_disable_msi(adapter->pdev);
-        pci_disable_device(pdev);
-        pci_set_power_state(pdev, pci_choose_state(pdev, state));
 
         return 0;
 }
 
-static int atl1_resume(struct pci_dev *pdev)
+static int atl1_resume(struct device *dev)
 {
+        struct pci_dev *pdev = to_pci_dev(dev);
         struct net_device *netdev = pci_get_drvdata(pdev);
         struct atl1_adapter *adapter = netdev_priv(netdev);
-        u32 err;
 
-        pci_set_power_state(pdev, PCI_D0);
-        pci_restore_state(pdev);
-
-        err = pci_enable_device(pdev);
-        if (err) {
-                if (netif_msg_ifup(adapter))
-                        dev_printk(KERN_DEBUG, &pdev->dev,
-                                "error enabling pci device\n");
-                return err;
-        }
-
-        pci_set_master(pdev);
         iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
-        pci_enable_wake(pdev, PCI_D3hot, 0);
-        pci_enable_wake(pdev, PCI_D3cold, 0);
 
         atl1_reset_hw(&adapter->hw);
 
@@ -2864,16 +2838,25 @@ static int atl1_resume(struct pci_dev *pdev)
 
         return 0;
 }
+
+static SIMPLE_DEV_PM_OPS(atl1_pm_ops, atl1_suspend, atl1_resume);
+#define ATL1_PM_OPS     (&atl1_pm_ops)
+
 #else
-#define atl1_suspend NULL
-#define atl1_resume NULL
+
+static int atl1_suspend(struct device *dev) { return 0; }
+
+#define ATL1_PM_OPS     NULL
 #endif
 
 static void atl1_shutdown(struct pci_dev *pdev)
 {
-#ifdef CONFIG_PM
-        atl1_suspend(pdev, PMSG_SUSPEND);
-#endif
+        struct net_device *netdev = pci_get_drvdata(pdev);
+        struct atl1_adapter *adapter = netdev_priv(netdev);
+
+        atl1_suspend(&pdev->dev);
+        pci_wake_from_d3(pdev, adapter->wol);
+        pci_set_power_state(pdev, PCI_D3hot);
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -3117,9 +3100,8 @@ static struct pci_driver atl1_driver = {
         .id_table = atl1_pci_tbl,
         .probe = atl1_probe,
         .remove = __devexit_p(atl1_remove),
-        .suspend = atl1_suspend,
-        .resume = atl1_resume,
-        .shutdown = atl1_shutdown
+        .shutdown = atl1_shutdown,
+        .driver.pm = ATL1_PM_OPS,
 };
 
 /*
@@ -3409,6 +3391,9 @@ static int atl1_set_wol(struct net_device *netdev,
         adapter->wol = 0;
         if (wol->wolopts & WAKE_MAGIC)
                 adapter->wol |= ATLX_WUFC_MAG;
+
+        device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
         return 0;
 }