3c574, 3c515 bitfields abuse

wn3_config is shared by these cards; the way we deal with it is both bad C
(union abuse) and broken on big-endian.  For 3c515 it's less serious (ISA
cards are quite rare outside of little-endian boxen), but 3c574 is a pcmcia
one and that'd better be endian-independent...  Fix is the same in both
cases.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 31 insertions, 29 deletions

diff --git a/drivers/net/3c515.c b/drivers/net/3c515.c
index 275e7510eba..684bab78101 100644
--- a/drivers/net/3c515.c
+++ b/drivers/net/3c515.c
@@ -243,14 +243,16 @@ enum eeprom_offset {
 enum Window3 {                  /* Window 3: MAC/config bits. */
         Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8,
 };
-union wn3_config {
-        int i;
-        struct w3_config_fields {
-                unsigned int ram_size:3, ram_width:1, ram_speed:2, rom_size:2;
-                int pad8:8;
-                unsigned int ram_split:2, pad18:2, xcvr:3, pad21:1, autoselect:1;
-                int pad24:7;
-        } u;
+enum wn3_config {
+        Ram_size = 7,
+        Ram_width = 8,
+        Ram_speed = 0x30,
+        Rom_size = 0xc0,
+        Ram_split_shift = 16,
+        Ram_split = 3 << Ram_split_shift,
+        Xcvr_shift = 20,
+        Xcvr = 7 << Xcvr_shift,
+        Autoselect = 0x1000000,
 };
 
 enum Window4 {
@@ -614,7 +616,7 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
         /* Read the station address from the EEPROM. */
         EL3WINDOW(0);
         for (i = 0; i < 0x18; i++) {
-                short *phys_addr = (short *) dev->dev_addr;
+                __be16 *phys_addr = (__be16 *) dev->dev_addr;
                 int timer;
                 outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
                 /* Pause for at least 162 us. for the read to take place. */
@@ -646,22 +648,22 @@ static int corkscrew_setup(struct net_device *dev, int ioaddr,
 
         {
                 char *ram_split[] = { "5:3", "3:1", "1:1", "3:5" };
-                union wn3_config config;
+                __u32 config;
                 EL3WINDOW(3);
                 vp->available_media = inw(ioaddr + Wn3_Options);
-                config.i = inl(ioaddr + Wn3_Config);
+                config = inl(ioaddr + Wn3_Config);
                 if (corkscrew_debug > 1)
                         printk(KERN_INFO "  Internal config register is %4.4x, transceivers %#x.\n",
-                                config.i, inw(ioaddr + Wn3_Options));
+                                config, inw(ioaddr + Wn3_Options));
                 printk(KERN_INFO "  %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
-                        8 << config.u.ram_size,
-                        config.u.ram_width ? "word" : "byte",
-                        ram_split[config.u.ram_split],
-                        config.u.autoselect ? "autoselect/" : "",
-                        media_tbl[config.u.xcvr].name);
-                dev->if_port = config.u.xcvr;
-                vp->default_media = config.u.xcvr;
-                vp->autoselect = config.u.autoselect;
+                        8 << config & Ram_size,
+                        config & Ram_width ? "word" : "byte",
+                        ram_split[(config & Ram_split) >> Ram_split_shift],
+                        config & Autoselect ? "autoselect/" : "",
+                        media_tbl[(config & Xcvr) >> Xcvr_shift].name);
+                vp->default_media = (config & Xcvr) >> Xcvr_shift;
+                vp->autoselect = config & Autoselect ? 1 : 0;
+                dev->if_port = vp->default_media;
         }
         if (vp->media_override != 7) {
                 printk(KERN_INFO "  Media override to transceiver type %d (%s).\n",
@@ -694,14 +696,14 @@ static int corkscrew_open(struct net_device *dev)
 {
         int ioaddr = dev->base_addr;
         struct corkscrew_private *vp = netdev_priv(dev);
-        union wn3_config config;
+        __u32 config;
         int i;
 
         /* Before initializing select the active media port. */
         EL3WINDOW(3);
         if (vp->full_duplex)
                 outb(0x20, ioaddr + Wn3_MAC_Ctrl);      /* Set the full-duplex bit. */
-        config.i = inl(ioaddr + Wn3_Config);
+        config = inl(ioaddr + Wn3_Config);
 
         if (vp->media_override != 7) {
                 if (corkscrew_debug > 1)
@@ -727,12 +729,12 @@ static int corkscrew_open(struct net_device *dev)
         } else
                 dev->if_port = vp->default_media;
 
-        config.u.xcvr = dev->if_port;
-        outl(config.i, ioaddr + Wn3_Config);
+        config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
+        outl(config, ioaddr + Wn3_Config);
 
         if (corkscrew_debug > 1) {
                 printk("%s: corkscrew_open() InternalConfig %8.8x.\n",
-                       dev->name, config.i);
+                       dev->name, config);
         }
 
         outw(TxReset, ioaddr + EL3_CMD);
@@ -901,7 +903,7 @@ static void corkscrew_timer(unsigned long data)
                         ok = 1;
                 }
                 if (!ok) {
-                        union wn3_config config;
+                        __u32 config;
 
                         do {
                                 dev->if_port =
@@ -928,9 +930,9 @@ static void corkscrew_timer(unsigned long data)
                              ioaddr + Wn4_Media);
 
                         EL3WINDOW(3);
-                        config.i = inl(ioaddr + Wn3_Config);
-                        config.u.xcvr = dev->if_port;
-                        outl(config.i, ioaddr + Wn3_Config);
+                        config = inl(ioaddr + Wn3_Config);
+                        config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
+                        outl(config, ioaddr + Wn3_Config);
 
                         outw(dev->if_port == 3 ? StartCoax : StopCoax,
                              ioaddr + EL3_CMD);