ARM: 6894/1: mmci: trigger card detect IRQs on falling and rising edges

Right now the card detect IRQ for MMCI is requested without any
flags which will give some default machine-specified IRQ
behaviour. However on the U300 rising+falling edges (such as can
be expected from a simple GPIO to generate when inserting/removing
a card) need to be requested explicitly.

Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Cc: Ulf Hansson <ulf.hansson@stericsson.com>
Cc: Sebastian Rasmussen <sebastian.rasmussen@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 10 insertions, 2 deletions

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 5da5bea0f9f..7721de942c6 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1144,9 +1144,17 @@ static int __devinit mmci_probe(struct amba_device *dev,
                 else if (ret != -ENOSYS)
                         goto err_gpio_cd;
 
+                /*
+                 * A gpio pin that will detect cards when inserted and removed
+                 * will most likely want to trigger on the edges if it is
+                 * 0 when ejected and 1 when inserted (or mutatis mutandis
+                 * for the inverted case) so we request triggers on both
+                 * edges.
+                 */
                 ret = request_any_context_irq(gpio_to_irq(plat->gpio_cd),
-                                              mmci_cd_irq, 0,
-                                              DRIVER_NAME " (cd)", host);
+                                mmci_cd_irq,
+                                IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+                                DRIVER_NAME " (cd)", host);
                 if (ret >= 0)
                         host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
         }