V4L/DVB (5719): Tuner: Move device-specific private data out of tuner struct

Create private data struct for device specific private data.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

1 files changed, 22 insertions, 11 deletions

diff --git a/drivers/media/video/tda9887.c b/drivers/media/video/tda9887.c
index fde576f1101..01f18b07d01 100644
--- a/drivers/media/video/tda9887.c
+++ b/drivers/media/video/tda9887.c
@@ -29,6 +29,9 @@
                 printk(KERN_INFO "%s %d-%04x: " fmt, t->i2c.name, \
                         i2c_adapter_id(t->i2c.adapter), t->i2c.addr , ##arg); } while (0)
 
+struct tda9887_priv {
+        unsigned char      data[4];
+};
 
 /* ---------------------------------------------------------------------- */
 
@@ -508,10 +511,11 @@ static int tda9887_status(struct tuner *t)
 static void tda9887_configure(struct i2c_client *client)
 {
         struct tuner *t = i2c_get_clientdata(client);
+        struct tda9887_priv *priv = t->priv;
         int rc;
 
-        memset(t->tda9887_data,0,sizeof(t->tda9887_data));
-        tda9887_set_tvnorm(t,t->tda9887_data);
+        memset(priv->data,0,sizeof(priv->data));
+        tda9887_set_tvnorm(t,priv->data);
 
         /* A note on the port settings:
            These settings tend to depend on the specifics of the board.
@@ -526,22 +530,22 @@ static void tda9887_configure(struct i2c_client *client)
            the ports should be set to active (0), but, again, that may
            differ depending on the precise hardware configuration.
          */
-        t->tda9887_data[1] |= cOutputPort1Inactive;
-        t->tda9887_data[1] |= cOutputPort2Inactive;
+        priv->data[1] |= cOutputPort1Inactive;
+        priv->data[1] |= cOutputPort2Inactive;
 
-        tda9887_set_config(t,t->tda9887_data);
-        tda9887_set_insmod(t,t->tda9887_data);
+        tda9887_set_config(t,priv->data);
+        tda9887_set_insmod(t,priv->data);
 
         if (t->mode == T_STANDBY) {
-                t->tda9887_data[1] |= cForcedMuteAudioON;
+                priv->data[1] |= cForcedMuteAudioON;
         }
 
         tda9887_dbg("writing: b=0x%02x c=0x%02x e=0x%02x\n",
-                t->tda9887_data[1],t->tda9887_data[2],t->tda9887_data[3]);
+                priv->data[1],priv->data[2],priv->data[3]);
         if (tuner_debug > 1)
-                dump_write_message(t, t->tda9887_data);
+                dump_write_message(t, priv->data);
 
-        if (4 != (rc = i2c_master_send(&t->i2c,t->tda9887_data,4)))
+        if (4 != (rc = i2c_master_send(&t->i2c,priv->data,4)))
                 tda9887_info("i2c i/o error: rc == %d (should be 4)\n",rc);
 
         if (tuner_debug > 2) {
@@ -555,7 +559,8 @@ static void tda9887_configure(struct i2c_client *client)
 static void tda9887_tuner_status(struct i2c_client *client)
 {
         struct tuner *t = i2c_get_clientdata(client);
-        tda9887_info("Data bytes: b=0x%02x c=0x%02x e=0x%02x\n", t->tda9887_data[1], t->tda9887_data[2], t->tda9887_data[3]);
+        struct tda9887_priv *priv = t->priv;
+        tda9887_info("Data bytes: b=0x%02x c=0x%02x e=0x%02x\n", priv->data[1], priv->data[2], priv->data[3]);
 }
 
 static int tda9887_get_afc(struct i2c_client *client)
@@ -588,8 +593,14 @@ static void tda9887_set_freq(struct i2c_client *client, unsigned int freq)
 
 int tda9887_tuner_init(struct i2c_client *c)
 {
+        struct tda9887_priv *priv = NULL;
         struct tuner *t = i2c_get_clientdata(c);
 
+        priv = kzalloc(sizeof(struct tda9887_priv), GFP_KERNEL);
+        if (priv == NULL)
+                return -ENOMEM;
+        t->priv = priv;
+
         strlcpy(c->name, "tda9887", sizeof(c->name));
 
         tda9887_info("tda988[5/6/7] found @ 0x%x (%s)\n", t->i2c.addr,