V4L/DVB (11810): em28xx: properly set packet size based on the device's eeprom configuration.

The em28xx actually has a register that tells the driver what the maximum
packet size is (based on a value programmed into the eeprom).  Make use of
that register instead of assuming a hardcoded value of 564 (since 564 is not
correct for devices that do QAM such as the KWorld 340u).

Note that for now the em2874 code isn't there, falling back to the 564 value,
however this is not a problem since there are not any em2874 based devices in
the current v4l-dvb tree).

Thanks to Jarod Wilson for detecting the initial problem and figuring out that
the isoc configuration was wrong for his device.

Cc: Jarod Wilson <jarod@wilsonet.com>
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 16 insertions, 0 deletions

diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h
index 24e39c56811..a2676d63cfd 100644
--- a/drivers/media/video/em28xx/em28xx-reg.h
+++ b/drivers/media/video/em28xx/em28xx-reg.h
@@ -27,6 +27,22 @@
 #define EM28XX_CHIPCFG_AC97                     0x10
 #define EM28XX_CHIPCFG_AUDIOMASK                0x30
 
+#define EM28XX_R01_CHIPCFG2     0x01
+
+/* em28xx Chip Configuration 2 0x01 */
+#define EM28XX_CHIPCFG2_TS_PRESENT              0x10
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_MASK    0x0c /* bits 3-2 */
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_1MF     0x00
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_2MF     0x04
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_4MF     0x08
+#define EM28XX_CHIPCFG2_TS_REQ_INTERVAL_8MF     0x0c
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_MASK      0x03 /* bits 0-1 */
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_188       0x00
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_376       0x01
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_564       0x02
+#define EM28XX_CHIPCFG2_TS_PACKETSIZE_752       0x03
+
+
         /* GPIO/GPO registers */
 #define EM2880_R04_GPO  0x04    /* em2880-em2883 only */
 #define EM28XX_R08_GPIO 0x08    /* em2820 or upper */