Input: elantech - report position also with 3 fingers

The 6-byte protocol supports reporting the position when three fingers
are pressed, exactly like when one finger is pressed. Report this.

In addition, it is also distinguishes between 3 and 4 fingers pressed.

Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

1 files changed, 10 insertions, 0 deletions

diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index bd5b91da169..48311204ba5 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -257,6 +257,14 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
         input_report_key(dev, BTN_TOUCH, fingers != 0);
 
         switch (fingers) {
+        case 3:
+                /*
+                 * Same as one finger, except report of more than 3 fingers:
+                 * byte 3:  n4  .   w1  w0   .   .   .   .
+                 */
+                if (packet[3] & 0x80)
+                        fingers = 4;
+                /* pass through... */
         case 1:
                 /*
                  * byte 1:  .   .   .   .   .  x10 x9  x8
@@ -309,6 +317,7 @@ static void elantech_report_absolute_v2(struct psmouse *psmouse)
         input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
         input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
         input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+        input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
         input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
         input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
 
@@ -466,6 +475,7 @@ static void elantech_set_input_params(struct psmouse *psmouse)
                 break;
 
         case 2:
+                __set_bit(BTN_TOOL_QUADTAP, dev->keybit);
                 input_set_abs_params(dev, ABS_X, ETP_XMIN_V2, ETP_XMAX_V2, 0, 0);
                 input_set_abs_params(dev, ABS_Y, ETP_YMIN_V2, ETP_YMAX_V2, 0, 0);
                 input_set_abs_params(dev, ABS_HAT0X, ETP_2FT_XMIN, ETP_2FT_XMAX, 0, 0);