Input: arrange keyboards alphabetically

Hopefully it will reduce conflicts when merging patches.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

1 files changed, 145 insertions, 146 deletions

diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 9d8f796c674..d2df1030675 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -12,6 +12,42 @@ menuconfig INPUT_KEYBOARD
 
 if INPUT_KEYBOARD
 
+config KEYBOARD_AAED2000
+        tristate "AAED-2000 keyboard"
+        depends on MACH_AAED2000
+        select INPUT_POLLDEV
+        default y
+        help
+          Say Y here to enable the keyboard on the Agilent AAED-2000
+          development board.
+
+          To compile this driver as a module, choose M here: the
+          module will be called aaed2000_kbd.
+
+config KEYBOARD_AMIGA
+        tristate "Amiga keyboard"
+        depends on AMIGA
+        help
+          Say Y here if you are running Linux on any AMIGA and have a keyboard
+          attached.
+
+          To compile this driver as a module, choose M here: the
+          module will be called amikbd.
+
+config ATARI_KBD_CORE
+        bool
+
+config KEYBOARD_ATARI
+        tristate "Atari keyboard"
+        depends on ATARI
+        select ATARI_KBD_CORE
+        help
+          Say Y here if you are running Linux on any Atari and have a keyboard
+          attached.
+
+          To compile this driver as a module, choose M here: the
+          module will be called atakbd.
+
 config KEYBOARD_ATKBD
         tristate "AT keyboard" if EMBEDDED || !X86
         default y
@@ -68,69 +104,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES
           right-hand column will be interpreted as the key shown in the
           left-hand column.
 
-config KEYBOARD_SUNKBD
-        tristate "Sun Type 4 and Type 5 keyboard"
-        select SERIO
-        help
-          Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
-          connected either to the Sun keyboard connector or to an serial
-          (RS-232) port via a simple adapter.
-
-          To compile this driver as a module, choose M here: the
-          module will be called sunkbd.
-
-config KEYBOARD_LKKBD
-        tristate "DECstation/VAXstation LK201/LK401 keyboard"
-        select SERIO
-        help
-          Say Y here if you want to use a LK201 or LK401 style serial
-          keyboard. This keyboard is also useable on PCs if you attach
-          it with the inputattach program. The connector pinout is
-          described within lkkbd.c.
-
-          To compile this driver as a module, choose M here: the
-          module will be called lkkbd.
-
-config KEYBOARD_LOCOMO
-        tristate "LoCoMo Keyboard Support"
-        depends on SHARP_LOCOMO && INPUT_KEYBOARD
-        help
-          Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
-
-          To compile this driver as a module, choose M here: the
-          module will be called locomokbd.
-
-config KEYBOARD_XTKBD
-        tristate "XT keyboard"
-        select SERIO
-        help
-          Say Y here if you want to use the old IBM PC/XT keyboard (or
-          compatible) on your system. This is only possible with a
-          parallel port keyboard adapter, you cannot connect it to the
-          keyboard port on a PC that runs Linux.
-
-          To compile this driver as a module, choose M here: the
-          module will be called xtkbd.
-
-config KEYBOARD_NEWTON
-        tristate "Newton keyboard"
-        select SERIO
-        help
-          Say Y here if you have a Newton keyboard on a serial port.
-
-          To compile this driver as a module, choose M here: the
-          module will be called newtonkbd.
-
-config KEYBOARD_STOWAWAY
-        tristate "Stowaway keyboard"
-        select SERIO
+config KEYBOARD_BFIN
+        tristate "Blackfin BF54x keypad support"
+        depends on (BF54x && !BF544)
         help
-          Say Y here if you have a Stowaway keyboard on a serial port.
-          Stowaway compatible keyboards like Dicota Input-PDA keyboard
-          are also supported by this driver.
+          Say Y here if you want to use the BF54x keypad.
 
           To compile this driver as a module, choose M here: the
-          module will be called stowaway.
+          module will be called bf54x-keys.
 
 config KEYBOARD_CORGI
         tristate "Corgi keyboard"
@@ -143,61 +124,41 @@ config KEYBOARD_CORGI
           To compile this driver as a module, choose M here: the
           module will be called corgikbd.
 
-config KEYBOARD_SPITZ
-        tristate "Spitz keyboard"
-        depends on PXA_SHARPSL
-        default y
+config KEYBOARD_LKKBD
+        tristate "DECstation/VAXstation LK201/LK401 keyboard"
+        select SERIO
         help
-          Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
-          SL-C3000 and Sl-C3100 series of PDAs.
+          Say Y here if you want to use a LK201 or LK401 style serial
+          keyboard. This keyboard is also useable on PCs if you attach
+          it with the inputattach program. The connector pinout is
+          described within lkkbd.c.
 
           To compile this driver as a module, choose M here: the
-          module will be called spitzkbd.
+          module will be called lkkbd.
 
-config KEYBOARD_TOSA
-        tristate "Tosa keyboard"
-        depends on MACH_TOSA
-        default y
+config KEYBOARD_EP93XX
+        tristate "EP93xx Matrix Keypad support"
+        depends on ARCH_EP93XX
         help
-          Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+          Say Y here to enable the matrix keypad on the Cirrus EP93XX.
 
           To compile this driver as a module, choose M here: the
-          module will be called tosakbd.
-
-config KEYBOARD_TOSA_USE_EXT_KEYCODES
-        bool "Tosa keyboard: use extended keycodes"
-        depends on KEYBOARD_TOSA
-        default n
-        help
-          Say Y here to enable the tosa keyboard driver to generate extended
-          (>= 127) keycodes. Be aware, that they can't be correctly interpreted
-          by either console keyboard driver or by Kdrive keybd driver.
-
-          Say Y only if you know, what you are doing!
+          module will be called ep93xx_keypad.
 
-config KEYBOARD_AMIGA
-        tristate "Amiga keyboard"
-        depends on AMIGA
+config KEYBOARD_GPIO
+        tristate "GPIO Buttons"
+        depends on GENERIC_GPIO
         help
-          Say Y here if you are running Linux on any AMIGA and have a keyboard
-          attached.
-
-          To compile this driver as a module, choose M here: the
-          module will be called amikbd.
-
-config ATARI_KBD_CORE
-        bool
+          This driver implements support for buttons connected
+          to GPIO pins of various CPUs (and some other chips).
 
-config KEYBOARD_ATARI
-        tristate "Atari keyboard"
-        depends on ATARI
-        select ATARI_KBD_CORE
-        help
-          Say Y here if you are running Linux on any Atari and have a keyboard
-          attached.
+          Say Y here if your device has buttons connected
+          directly to such GPIO pins.  Your board-specific
+          setup logic must also provide a platform device,
+          with configuration data saying which GPIOs are used.
 
           To compile this driver as a module, choose M here: the
-          module will be called atakbd.
+          module will be called gpio-keys.
 
 config KEYBOARD_HIL_OLD
         tristate "HP HIL keyboard support (simple driver)"
@@ -261,14 +222,33 @@ config KEYBOARD_LM8323
           To compile this driver as a module, choose M here: the
           module will be called lm8323.
 
-config KEYBOARD_OMAP
-        tristate "TI OMAP keypad support"
-        depends on (ARCH_OMAP1 || ARCH_OMAP2)
+config KEYBOARD_LOCOMO
+        tristate "LoCoMo Keyboard Support"
+        depends on SHARP_LOCOMO
         help
-          Say Y here if you want to use the OMAP keypad.
+          Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
 
           To compile this driver as a module, choose M here: the
-          module will be called omap-keypad.
+          module will be called locomokbd.
+
+config KEYBOARD_MAPLE
+        tristate "Maple bus keyboard"
+        depends on SH_DREAMCAST && MAPLE
+        help
+          Say Y here if you have a Dreamcast console running Linux and have
+          a keyboard attached to its Maple bus.
+
+          To compile this driver as a module, choose M here: the
+          module will be called maple_keyb.
+
+config KEYBOARD_NEWTON
+        tristate "Newton keyboard"
+        select SERIO
+        help
+          Say Y here if you have a Newton keyboard on a serial port.
+
+          To compile this driver as a module, choose M here: the
+          module will be called newtonkbd.
 
 config KEYBOARD_PXA27x
         tristate "PXA27x/PXA3xx keypad support"
@@ -288,51 +268,38 @@ config KEYBOARD_PXA930_ROTARY
           To compile this driver as a module, choose M here: the
           module will be called pxa930_rotary.
 
-config KEYBOARD_AAED2000
-        tristate "AAED-2000 keyboard"
-        depends on MACH_AAED2000
-        select INPUT_POLLDEV
+config KEYBOARD_SPITZ
+        tristate "Spitz keyboard"
+        depends on PXA_SHARPSL
         default y
         help
-          Say Y here to enable the keyboard on the Agilent AAED-2000
-          development board.
-
-          To compile this driver as a module, choose M here: the
-          module will be called aaed2000_kbd.
-
-config KEYBOARD_GPIO
-        tristate "GPIO Buttons"
-        depends on GENERIC_GPIO
-        help
-          This driver implements support for buttons connected
-          to GPIO pins of various CPUs (and some other chips).
-
-          Say Y here if your device has buttons connected
-          directly to such GPIO pins.  Your board-specific
-          setup logic must also provide a platform device,
-          with configuration data saying which GPIOs are used.
+          Say Y here to enable the keyboard on the Sharp Zaurus SL-C1000,
+          SL-C3000 and Sl-C3100 series of PDAs.
 
           To compile this driver as a module, choose M here: the
-          module will be called gpio-keys.
+          module will be called spitzkbd.
 
-config KEYBOARD_MAPLE
-        tristate "Maple bus keyboard"
-        depends on SH_DREAMCAST && MAPLE
+config KEYBOARD_STOWAWAY
+        tristate "Stowaway keyboard"
+        select SERIO
         help
-          Say Y here if you have a Dreamcast console running Linux and have
-          a keyboard attached to its Maple bus.
+          Say Y here if you have a Stowaway keyboard on a serial port.
+          Stowaway compatible keyboards like Dicota Input-PDA keyboard
+          are also supported by this driver.
 
           To compile this driver as a module, choose M here: the
-          module will be called maple_keyb.
+          module will be called stowaway.
 
-config KEYBOARD_BFIN
-        tristate "Blackfin BF54x keypad support"
-        depends on (BF54x && !BF544)
+config KEYBOARD_SUNKBD
+        tristate "Sun Type 4 and Type 5 keyboard"
+        select SERIO
         help
-          Say Y here if you want to use the BF54x keypad.
+          Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
+          connected either to the Sun keyboard connector or to an serial
+          (RS-232) port via a simple adapter.
 
           To compile this driver as a module, choose M here: the
-          module will be called bf54x-keys.
+          module will be called sunkbd.
 
 config KEYBOARD_SH_KEYSC
         tristate "SuperH KEYSC keypad support"
@@ -344,13 +311,45 @@ config KEYBOARD_SH_KEYSC
           To compile this driver as a module, choose M here: the
           module will be called sh_keysc.
 
-config KEYBOARD_EP93XX
-        tristate "EP93xx Matrix Keypad support"
-        depends on ARCH_EP93XX
+config KEYBOARD_OMAP
+        tristate "TI OMAP keypad support"
+        depends on (ARCH_OMAP1 || ARCH_OMAP2)
         help
-          Say Y here to enable the matrix keypad on the Cirrus EP93XX.
+          Say Y here if you want to use the OMAP keypad.
 
           To compile this driver as a module, choose M here: the
-          module will be called ep93xx_keypad.
+          module will be called omap-keypad.
+
+config KEYBOARD_TOSA
+        tristate "Tosa keyboard"
+        depends on MACH_TOSA
+        default y
+        help
+          Say Y here to enable the keyboard on the Sharp Zaurus SL-6000x (Tosa)
+
+          To compile this driver as a module, choose M here: the
+          module will be called tosakbd.
+
+config KEYBOARD_TOSA_USE_EXT_KEYCODES
+        bool "Tosa keyboard: use extended keycodes"
+        depends on KEYBOARD_TOSA
+        help
+          Say Y here to enable the tosa keyboard driver to generate extended
+          (>= 127) keycodes. Be aware, that they can't be correctly interpreted
+          by either console keyboard driver or by Kdrive keybd driver.
+
+          Say Y only if you know, what you are doing!
+
+config KEYBOARD_XTKBD
+        tristate "XT keyboard"
+        select SERIO
+        help
+          Say Y here if you want to use the old IBM PC/XT keyboard (or
+          compatible) on your system. This is only possible with a
+          parallel port keyboard adapter, you cannot connect it to the
+          keyboard port on a PC that runs Linux.
+
+          To compile this driver as a module, choose M here: the
+          module will be called xtkbd.
 
 endif