ide: use ATA_* defines instead of *_STAT and *_ERR ones

* ERR_STAT   -> ATA_ERR
* INDEX_STAT -> ATA_IDX
* ECC_STAT   -> ATA_CORR
* DRQ_STAT   -> ATA_DRQ
* SEEK_STAT  -> ATA_DSC
* WRERR_STAT -> ATA_DF
* READY_STAT -> ATA_DRDY
* BUSY_STAT  -> ATA_BUSY

* MARK_ERR   -> ATA_AMNF
* TRK0_ERR   -> ATA_TRK0NF
* ABRT_ERR   -> ATA_ABORTED
* MCR_ERR    -> ATA_MCR
* ID_ERR     -> ATA_IDNF
* MC_ERR     -> ATA_MC
* ECC_ERR    -> ATA_UNC
* ICRC_ERR   -> ATA_ICRC

* BBD_ERR    -> ATA_BBK

Also:

* ILI_ERR    -> ATAPI_ILI
* EOM_ERR    -> ATAPI_EOM
* LFS_ERR    -> ATAPI_LFS

* CD         -> ATAPI_COD
* IO         -> ATAPI_IO

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 11 insertions, 11 deletions

diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 21647a2eaff..8cfa6125c7a 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -473,7 +473,7 @@ int drive_is_ready (ide_drive_t *drive)
                 /* Note: this may clear a pending IRQ!! */
                 stat = hwif->tp_ops->read_status(hwif);
 
-        if (stat & BUSY_STAT)
+        if (stat & ATA_BUSY)
                 /* drive busy:  definitely not interrupting */
                 return 0;
 
@@ -505,10 +505,10 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti
         udelay(1);      /* spec allows drive 400ns to assert "BUSY" */
         stat = tp_ops->read_status(hwif);
 
-        if (stat & BUSY_STAT) {
+        if (stat & ATA_BUSY) {
                 local_irq_set(flags);
                 timeout += jiffies;
-                while ((stat = tp_ops->read_status(hwif)) & BUSY_STAT) {
+                while ((stat = tp_ops->read_status(hwif)) & ATA_BUSY) {
                         if (time_after(jiffies, timeout)) {
                                 /*
                                  * One last read after the timeout in case
@@ -516,7 +516,7 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti
                                  * progress during the timeout..
                                  */
                                 stat = tp_ops->read_status(hwif);
-                                if (!(stat & BUSY_STAT))
+                                if ((stat & ATA_BUSY) == 0)
                                         break;
 
                                 local_irq_restore(flags);
@@ -685,12 +685,12 @@ int ide_driveid_update(ide_drive_t *drive)
 
                 msleep(50);     /* give drive a breather */
                 stat = tp_ops->read_altstatus(hwif);
-        } while (stat & BUSY_STAT);
+        } while (stat & ATA_BUSY);
 
-        msleep(50);     /* wait for IRQ and DRQ_STAT */
+        msleep(50);     /* wait for IRQ and ATA_DRQ */
         stat = tp_ops->read_status(hwif);
 
-        if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) {
+        if (!OK_STAT(stat, ATA_DRQ, BAD_R_STAT)) {
                 SELECT_MASK(drive, 0);
                 printk("%s: CHECK for good STATUS\n", drive->name);
                 return 0;
@@ -776,7 +776,7 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed)
                 tp_ops->set_irq(hwif, 1);
 
         error = __ide_wait_stat(drive, drive->ready_stat,
-                                BUSY_STAT|DRQ_STAT|ERR_STAT,
+                                ATA_BUSY | ATA_DRQ | ATA_ERR,
                                 WAIT_CMD, &stat);
 
         SELECT_MASK(drive, 0);
@@ -923,7 +923,7 @@ static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive)
         udelay (10);
         stat = hwif->tp_ops->read_status(hwif);
 
-        if (OK_STAT(stat, 0, BUSY_STAT))
+        if (OK_STAT(stat, 0, ATA_BUSY))
                 printk("%s: ATAPI reset complete\n", drive->name);
         else {
                 if (time_before(jiffies, hwgroup->poll_timeout)) {
@@ -969,7 +969,7 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive)
 
         tmp = hwif->tp_ops->read_status(hwif);
 
-        if (!OK_STAT(tmp, 0, BUSY_STAT)) {
+        if (!OK_STAT(tmp, 0, ATA_BUSY)) {
                 if (time_before(jiffies, hwgroup->poll_timeout)) {
                         ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL);
                         /* continue polling */
@@ -1183,7 +1183,7 @@ int ide_wait_not_busy(ide_hwif_t *hwif, unsigned long timeout)
                  */
                 mdelay(1);
                 stat = hwif->tp_ops->read_status(hwif);
-                if ((stat & BUSY_STAT) == 0)
+                if ((stat & ATA_BUSY) == 0)
                         return 0;
                 /*
                  * Assume a value of 0xff means nothing is connected to