i2c-imx: fix error handling

- Return -ETIMEDOUT on bus busy error
- Fix timeout test "time_after(jiffies, orig_jiffies + HZ / 1000)" :
  By default, HZ=100 on arm. This means that this test has no chances to
  work and may result in a dead loop. Set timeout to 500ms.
- Don't try to send a new message if we failed to transmit
  previous one. This was preventing to recover from error on my system

Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

1 files changed, 4 insertions, 2 deletions

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index f7e27b70237..d1ff9408dc1 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -146,10 +146,10 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
                                 "<%s> I2C Interrupted\n", __func__);
                         return -EINTR;
                 }
-                if (time_after(jiffies, orig_jiffies + HZ / 1000)) {
+                if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
                         dev_dbg(&i2c_imx->adapter.dev,
                                 "<%s> I2C bus is busy\n", __func__);
-                        return -EIO;
+                        return -ETIMEDOUT;
                 }
                 schedule();
         }
@@ -444,6 +444,8 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
                         result = i2c_imx_read(i2c_imx, &msgs[i]);
                 else
                         result = i2c_imx_write(i2c_imx, &msgs[i]);
+                if (result)
+                        goto fail0;
         }
 
 fail0: