ltc4215/ltc4245: Discard obsolete detect methods

There is no point in implementing a detect callback for the LTC4215
and LTC4245, as these devices can't be detected. It was there solely
to handle "force" module parameters to instantiate devices, but now
we have a better sysfs interface that can do the same.

So we can get rid of the ugly module parameters and the detect
callbacks. This shrinks the binary module sizes by 36% and 46%,
respectively.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ira W. Snyder <iws@ovro.caltech.edu>

1 files changed, 5 insertions, 42 deletions

diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 6c9a04136e0..00d975eb5b8 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -20,11 +20,6 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4215);
-
 /* Here are names of the chip's registers (a.k.a. commands) */
 enum ltc4215_cmd {
         LTC4215_CONTROL                 = 0x00, /* rw */
@@ -246,9 +241,13 @@ static const struct attribute_group ltc4215_group = {
 static int ltc4215_probe(struct i2c_client *client,
                          const struct i2c_device_id *id)
 {
+        struct i2c_adapter *adapter = client->adapter;
         struct ltc4215_data *data;
         int ret;
 
+        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+                return -ENODEV;
+
         data = kzalloc(sizeof(*data), GFP_KERNEL);
         if (!data) {
                 ret = -ENOMEM;
@@ -294,56 +293,20 @@ static int ltc4215_remove(struct i2c_client *client)
         return 0;
 }
 
-static int ltc4215_detect(struct i2c_client *client,
-                          int kind,
-                          struct i2c_board_info *info)
-{
-        struct i2c_adapter *adapter = client->adapter;
-
-        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-                return -ENODEV;
-
-        if (kind < 0) {         /* probed detection - check the chip type */
-                s32 v;          /* 8 bits from the chip, or -ERRNO */
-
-                /*
-                 * Register 0x01 bit b7 is reserved, expect 0
-                 * Register 0x03 bit b6 and b7 are reserved, expect 0
-                 */
-                v = i2c_smbus_read_byte_data(client, LTC4215_ALERT);
-                if (v < 0 || (v & (1 << 7)) != 0)
-                        return -ENODEV;
-
-                v = i2c_smbus_read_byte_data(client, LTC4215_FAULT);
-                if (v < 0 || (v & ((1 << 6) | (1 << 7))) != 0)
-                                return -ENODEV;
-        }
-
-        strlcpy(info->type, "ltc4215", I2C_NAME_SIZE);
-        dev_info(&adapter->dev, "ltc4215 %s at address 0x%02x\n",
-                        kind < 0 ? "probed" : "forced",
-                        client->addr);
-
-        return 0;
-}
-
 static const struct i2c_device_id ltc4215_id[] = {
-        { "ltc4215", ltc4215 },
+        { "ltc4215", 0 },
         { }
 };
 MODULE_DEVICE_TABLE(i2c, ltc4215_id);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver ltc4215_driver = {
-        .class          = I2C_CLASS_HWMON,
         .driver = {
                 .name   = "ltc4215",
         },
         .probe          = ltc4215_probe,
         .remove         = ltc4215_remove,
         .id_table       = ltc4215_id,
-        .detect         = ltc4215_detect,
-        .address_data   = &addr_data,
 };
 
 static int __init ltc4215_init(void)