esp: use tty_port

Switch esp to use the new tty_port structures

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1 files changed, 136 insertions, 136 deletions

diff --git a/drivers/char/esp.c b/drivers/char/esp.c
index 84840ba13ff..2eaf09f93e3 100644
--- a/drivers/char/esp.c
+++ b/drivers/char/esp.c
@@ -128,9 +128,9 @@ static struct tty_driver *esp_driver;
 
 #if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
 #define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
-                                tty->name, info->flags, \
+                                tty->name, info->port.flags, \
                                 serial_driver.refcount, \
-                                info->count, tty->count, s)
+                                info->port.count, tty->count, s)
 #else
 #define DBG_CNT(s)
 #endif
@@ -172,13 +172,13 @@ static inline int serial_paranoia_check(struct esp_struct *info,
 
 static inline unsigned int serial_in(struct esp_struct *info, int offset)
 {
-        return inb(info->port + offset);
+        return inb(info->io_port + offset);
 }
 
 static inline void serial_out(struct esp_struct *info, int offset,
                               unsigned char value)
 {
-        outb(value, info->port+offset);
+        outb(value, info->io_port+offset);
 }
 
 /*
@@ -273,7 +273,7 @@ static inline void release_pio_buffer(struct esp_pio_buffer *buf)
 
 static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
 {
-        struct tty_struct *tty = info->tty;
+        struct tty_struct *tty = info->port.tty;
         int i;
         struct esp_pio_buffer *pio_buf;
         struct esp_pio_buffer *err_buf;
@@ -295,7 +295,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
 
         for (i = 0; i < num_bytes - 1; i += 2) {
                 *((unsigned short *)(pio_buf->data + i)) =
-                        inw(info->port + UART_ESI_RX);
+                        inw(info->io_port + UART_ESI_RX);
                 err_buf->data[i] = serial_in(info, UART_ESI_RWS);
                 err_buf->data[i + 1] = (err_buf->data[i] >> 3) & status_mask;
                 err_buf->data[i] &= status_mask;
@@ -308,7 +308,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
         }
 
         /* make sure everything is still ok since interrupts were enabled */
-        tty = info->tty;
+        tty = info->port.tty;
 
         if (!tty) {
                 release_pio_buffer(pio_buf);
@@ -325,7 +325,7 @@ static inline void receive_chars_pio(struct esp_struct *info, int num_bytes)
 
                         if (err_buf->data[i] & 0x04) {
                                 flag = TTY_BREAK;
-                                if (info->flags & ASYNC_SAK)
+                                if (info->port.flags & ASYNC_SAK)
                                         do_SAK(tty);
                         } else if (err_buf->data[i] & 0x02)
                                 flag = TTY_FRAME;
@@ -370,7 +370,7 @@ static void receive_chars_dma(struct esp_struct *info, int num_bytes)
 static inline void receive_chars_dma_done(struct esp_struct *info,
                                             int status)
 {
-        struct tty_struct *tty = info->tty;
+        struct tty_struct *tty = info->port.tty;
         int num_bytes;
         unsigned long flags;
 
@@ -396,7 +396,7 @@ static inline void receive_chars_dma_done(struct esp_struct *info,
                         if (status & 0x10) {
                                 statflag = TTY_BREAK;
                                 (info->icount.brk)++;
-                                if (info->flags & ASYNC_SAK)
+                                if (info->port.flags & ASYNC_SAK)
                                         do_SAK(tty);
                         } else if (status & 0x08) {
                                 statflag = TTY_FRAME;
@@ -451,7 +451,7 @@ static inline void transmit_chars_pio(struct esp_struct *info,
 
                 for (i = 0; i < space_avail - 1; i += 2) {
                         outw(*((unsigned short *)(pio_buf->data + i)),
-                             info->port + UART_ESI_TX);
+                             info->io_port + UART_ESI_TX);
                 }
 
                 if (space_avail & 0x0001)
@@ -470,8 +470,8 @@ static inline void transmit_chars_pio(struct esp_struct *info,
         }
 
         if (info->xmit_cnt < WAKEUP_CHARS) {
-                if (info->tty)
-                        tty_wakeup(info->tty);
+                if (info->port.tty)
+                        tty_wakeup(info->port.tty);
 
 #ifdef SERIAL_DEBUG_INTR
                 printk("THRE...");
@@ -507,8 +507,8 @@ static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes)
         info->xmit_tail = (info->xmit_tail + dma_bytes) & (ESP_XMIT_SIZE - 1);
 
         if (info->xmit_cnt < WAKEUP_CHARS) {
-                if (info->tty)
-                        tty_wakeup(info->tty);
+                if (info->port.tty)
+                        tty_wakeup(info->port.tty);
 
 #ifdef SERIAL_DEBUG_INTR
                 printk("THRE...");
@@ -575,18 +575,18 @@ static void check_modem_status(struct esp_struct *info)
                 wake_up_interruptible(&info->delta_msr_wait);
         }
 
-        if ((info->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
+        if ((info->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) {
 #if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
                 printk("ttys%d CD now %s...", info->line,
                        (status & UART_MSR_DCD) ? "on" : "off");
 #endif
                 if (status & UART_MSR_DCD)
-                        wake_up_interruptible(&info->open_wait);
+                        wake_up_interruptible(&info->port.open_wait);
                 else {
 #ifdef SERIAL_DEBUG_OPEN
                         printk("scheduling hangup...");
 #endif
-                        tty_hangup(info->tty);
+                        tty_hangup(info->port.tty);
                 }
         }
 }
@@ -609,7 +609,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
 
         spin_lock(&info->lock);
 
-        if (!info->tty) {
+        if (!info->port.tty) {
                 spin_unlock(&info->lock);
                 return IRQ_NONE;
         }
@@ -647,7 +647,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
                 num_bytes = serial_in(info, UART_ESI_STAT1) << 8;
                 num_bytes |= serial_in(info, UART_ESI_STAT2);
 
-                num_bytes = tty_buffer_request_room(info->tty, num_bytes);
+                num_bytes = tty_buffer_request_room(info->port.tty, num_bytes);
 
                 if (num_bytes) {
                         if (dma_bytes ||
@@ -661,7 +661,7 @@ static irqreturn_t rs_interrupt_single(int irq, void *dev_id)
 
         if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) &&
             (scratch & 0x02) && (info->IER & UART_IER_THRI)) {
-                if ((info->xmit_cnt <= 0) || info->tty->stopped) {
+                if ((info->xmit_cnt <= 0) || info->port.tty->stopped) {
                         info->IER &= ~UART_IER_THRI;
                         serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
                         serial_out(info, UART_ESI_CMD2, info->IER);
@@ -782,7 +782,7 @@ static int startup(struct esp_struct *info)
 
         spin_lock_irqsave(&info->lock, flags);
 
-        if (info->flags & ASYNC_INITIALIZED)
+        if (info->port.flags & ASYNC_INITIALIZED)
                 goto out;
 
         if (!info->xmit_buf) {
@@ -806,7 +806,7 @@ static int startup(struct esp_struct *info)
         num_chars |= serial_in(info, UART_ESI_STAT2);
 
         while (num_chars > 1) {
-                inw(info->port + UART_ESI_RX);
+                inw(info->io_port + UART_ESI_RX);
                 num_chars -= 2;
         }
 
@@ -834,9 +834,9 @@ static int startup(struct esp_struct *info)
 
         if (retval) {
                 if (capable(CAP_SYS_ADMIN)) {
-                        if (info->tty)
+                        if (info->port.tty)
                                 set_bit(TTY_IO_ERROR,
-                                        &info->tty->flags);
+                                        &info->port.tty->flags);
                         retval = 0;
                 }
                 goto out_unlocked;
@@ -874,30 +874,30 @@ static int startup(struct esp_struct *info)
         serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
         serial_out(info, UART_ESI_CMD2, info->IER);
 
-        if (info->tty)
-                clear_bit(TTY_IO_ERROR, &info->tty->flags);
+        if (info->port.tty)
+                clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
         info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
         spin_unlock_irqrestore(&info->lock, flags);
 
         /*
          * Set up the tty->alt_speed kludge
          */
-        if (info->tty) {
-                if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-                        info->tty->alt_speed = 57600;
-                if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-                        info->tty->alt_speed = 115200;
-                if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-                        info->tty->alt_speed = 230400;
-                if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-                        info->tty->alt_speed = 460800;
+        if (info->port.tty) {
+                if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+                        info->port.tty->alt_speed = 57600;
+                if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+                        info->port.tty->alt_speed = 115200;
+                if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+                        info->port.tty->alt_speed = 230400;
+                if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+                        info->port.tty->alt_speed = 460800;
         }
 
         /*
          * set the speed of the serial port
          */
         change_speed(info);
-        info->flags |= ASYNC_INITIALIZED;
+        info->port.flags |= ASYNC_INITIALIZED;
         return 0;
 
 out:
@@ -914,7 +914,7 @@ static void shutdown(struct esp_struct *info)
 {
         unsigned long   flags, f;
 
-        if (!(info->flags & ASYNC_INITIALIZED))
+        if (!(info->port.flags & ASYNC_INITIALIZED))
                 return;
 
 #ifdef SERIAL_DEBUG_OPEN
@@ -951,7 +951,7 @@ static void shutdown(struct esp_struct *info)
 
                 while (current_port) {
                         if ((current_port != info) &&
-                            (current_port->flags & ASYNC_INITIALIZED))
+                            (current_port->port.flags & ASYNC_INITIALIZED))
                                 break;
 
                         current_port = current_port->next_port;
@@ -974,7 +974,7 @@ static void shutdown(struct esp_struct *info)
         serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
         serial_out(info, UART_ESI_CMD2, 0x00);
 
-        if (!info->tty || (info->tty->termios->c_cflag & HUPCL))
+        if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL))
                 info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS);
 
         info->MCR &= ~UART_MCR_OUT2;
@@ -982,10 +982,10 @@ static void shutdown(struct esp_struct *info)
         serial_out(info, UART_ESI_CMD2, UART_MCR);
         serial_out(info, UART_ESI_CMD2, info->MCR);
 
-        if (info->tty)
-                set_bit(TTY_IO_ERROR, &info->tty->flags);
+        if (info->port.tty)
+                set_bit(TTY_IO_ERROR, &info->port.tty->flags);
 
-        info->flags &= ~ASYNC_INITIALIZED;
+        info->port.flags &= ~ASYNC_INITIALIZED;
         spin_unlock_irqrestore(&info->lock, flags);
 }
 
@@ -1002,10 +1002,10 @@ static void change_speed(struct esp_struct *info)
         unsigned char flow1 = 0, flow2 = 0;
         unsigned long flags;
 
-        if (!info->tty || !info->tty->termios)
+        if (!info->port.tty || !info->port.tty->termios)
                 return;
-        cflag = info->tty->termios->c_cflag;
-        port = info->port;
+        cflag = info->port.tty->termios->c_cflag;
+        port = info->io_port;
 
         /* byte size and parity */
         switch (cflag & CSIZE) {
@@ -1029,9 +1029,9 @@ static void change_speed(struct esp_struct *info)
         if (cflag & CMSPAR)
                 cval |= UART_LCR_SPAR;
 #endif
-        baud = tty_get_baud_rate(info->tty);
+        baud = tty_get_baud_rate(info->port.tty);
         if (baud == 38400 &&
-                ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+                ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
                 quot = info->custom_divisor;
         else {
                 if (baud == 134) /* Special case since 134 is really 134.5 */
@@ -1046,49 +1046,49 @@ static void change_speed(struct esp_struct *info)
         if (baud) {
                 /* Actual rate */
                 baud = BASE_BAUD/quot;
-                tty_encode_baud_rate(info->tty, baud, baud);
+                tty_encode_baud_rate(info->port.tty, baud, baud);
         }
         info->timeout = ((1024 * HZ * bits * quot) / BASE_BAUD) + (HZ / 50);
 
         /* CTS flow control flag and modem status interrupts */
         /* info->IER &= ~UART_IER_MSI; */
         if (cflag & CRTSCTS) {
-                info->flags |= ASYNC_CTS_FLOW;
+                info->port.flags |= ASYNC_CTS_FLOW;
                 /* info->IER |= UART_IER_MSI; */
                 flow1 = 0x04;
                 flow2 = 0x10;
         } else
-                info->flags &= ~ASYNC_CTS_FLOW;
+                info->port.flags &= ~ASYNC_CTS_FLOW;
         if (cflag & CLOCAL)
-                info->flags &= ~ASYNC_CHECK_CD;
+                info->port.flags &= ~ASYNC_CHECK_CD;
         else
-                info->flags |= ASYNC_CHECK_CD;
+                info->port.flags |= ASYNC_CHECK_CD;
 
         /*
          * Set up parity check flag
          */
         info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
-        if (I_INPCK(info->tty))
+        if (I_INPCK(info->port.tty))
                 info->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
-        if (I_BRKINT(info->tty) || I_PARMRK(info->tty))
+        if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
                 info->read_status_mask |= UART_LSR_BI;
 
         info->ignore_status_mask = 0;
 #if 0
         /* This should be safe, but for some broken bits of hardware... */
-        if (I_IGNPAR(info->tty)) {
+        if (I_IGNPAR(info->port.tty)) {
                 info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
                 info->read_status_mask |= UART_LSR_PE | UART_LSR_FE;
         }
 #endif
-        if (I_IGNBRK(info->tty)) {
+        if (I_IGNBRK(info->port.tty)) {
                 info->ignore_status_mask |= UART_LSR_BI;
                 info->read_status_mask |= UART_LSR_BI;
                 /*
                  * If we're ignore parity and break indicators, ignore
                  * overruns too.  (For real raw support).
                  */
-                if (I_IGNPAR(info->tty)) {
+                if (I_IGNPAR(info->port.tty)) {
                         info->ignore_status_mask |= UART_LSR_OE | \
                                 UART_LSR_PE | UART_LSR_FE;
                         info->read_status_mask |= UART_LSR_OE | \
@@ -1096,7 +1096,7 @@ static void change_speed(struct esp_struct *info)
                 }
         }
 
-        if (I_IXOFF(info->tty))
+        if (I_IXOFF(info->port.tty))
                 flow1 |= 0x81;
 
         spin_lock_irqsave(&info->lock, flags);
@@ -1116,10 +1116,10 @@ static void change_speed(struct esp_struct *info)
         serial_out(info, UART_ESI_CMD2, flow2);
 
         /* set flow control characters (XON/XOFF only) */
-        if (I_IXOFF(info->tty)) {
+        if (I_IXOFF(info->port.tty)) {
                 serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CHARS);
-                serial_out(info, UART_ESI_CMD2, START_CHAR(info->tty));
-                serial_out(info, UART_ESI_CMD2, STOP_CHAR(info->tty));
+                serial_out(info, UART_ESI_CMD2, START_CHAR(info->port.tty));
+                serial_out(info, UART_ESI_CMD2, STOP_CHAR(info->port.tty));
                 serial_out(info, UART_ESI_CMD2, 0x10);
                 serial_out(info, UART_ESI_CMD2, 0x21);
                 switch (cflag & CSIZE) {
@@ -1355,9 +1355,9 @@ static int get_serial_info(struct esp_struct *info,
         memset(&tmp, 0, sizeof(tmp));
         tmp.type = PORT_16550A;
         tmp.line = info->line;
-        tmp.port = info->port;
+        tmp.port = info->io_port;
         tmp.irq = info->irq;
-        tmp.flags = info->flags;
+        tmp.flags = info->port.flags;
         tmp.xmit_fifo_size = 1024;
         tmp.baud_base = BASE_BAUD;
         tmp.close_delay = info->close_delay;
@@ -1407,7 +1407,7 @@ static int set_serial_info(struct esp_struct *info,
 
         if ((new_serial.type != PORT_16550A) ||
             (new_serial.hub6) ||
-            (info->port != new_serial.port) ||
+            (info->io_port != new_serial.port) ||
             (new_serial.baud_base != BASE_BAUD) ||
             (new_serial.irq > 15) ||
             (new_serial.irq < 2) ||
@@ -1425,9 +1425,9 @@ static int set_serial_info(struct esp_struct *info,
                 if (change_irq ||
                     (new_serial.close_delay != info->close_delay) ||
                     ((new_serial.flags & ~ASYNC_USR_MASK) !=
-                     (info->flags & ~ASYNC_USR_MASK)))
+                     (info->port.flags & ~ASYNC_USR_MASK)))
                         return -EPERM;
-                info->flags = ((info->flags & ~ASYNC_USR_MASK) |
+                info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) |
                                (new_serial.flags & ASYNC_USR_MASK));
                 info->custom_divisor = new_serial.custom_divisor;
         } else {
@@ -1441,9 +1441,9 @@ static int set_serial_info(struct esp_struct *info,
                                 if ((current_async->line >= info->line) &&
                                     (current_async->line < (info->line + 8))) {
                                         if (current_async == info) {
-                                                if (current_async->count > 1)
+                                                if (current_async->port.count > 1)
                                                         return -EBUSY;
-                                        } else if (current_async->count)
+                                        } else if (current_async->port.count)
                                                 return -EBUSY;
                                 }
 
@@ -1456,7 +1456,7 @@ static int set_serial_info(struct esp_struct *info,
                  * At this point, we start making changes.....
                  */
 
-                info->flags = ((info->flags & ~ASYNC_FLAGS) |
+                info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) |
                                (new_serial.flags & ASYNC_FLAGS));
                 info->custom_divisor = new_serial.custom_divisor;
                 info->close_delay = new_serial.close_delay * HZ/100;
@@ -1487,18 +1487,18 @@ static int set_serial_info(struct esp_struct *info,
                 }
         }
 
-        if (info->flags & ASYNC_INITIALIZED) {
-                if (((old_info.flags & ASYNC_SPD_MASK) !=
-                     (info->flags & ASYNC_SPD_MASK)) ||
+        if (info->port.flags & ASYNC_INITIALIZED) {
+                if (((old_info.port.flags & ASYNC_SPD_MASK) !=
+                     (info->port.flags & ASYNC_SPD_MASK)) ||
                     (old_info.custom_divisor != info->custom_divisor)) {
-                        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-                                info->tty->alt_speed = 57600;
-                        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-                                info->tty->alt_speed = 115200;
-                        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-                                info->tty->alt_speed = 230400;
-                        if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-                                info->tty->alt_speed = 460800;
+                        if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+                                info->port.tty->alt_speed = 57600;
+                        if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+                                info->port.tty->alt_speed = 115200;
+                        if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+                                info->port.tty->alt_speed = 230400;
+                        if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+                                info->port.tty->alt_speed = 460800;
                         change_speed(info);
                 }
         } else
@@ -1554,9 +1554,9 @@ static int set_esp_config(struct esp_struct *info,
 
                         while (current_async) {
                                 if (current_async == info) {
-                                        if (current_async->count > 1)
+                                        if (current_async->port.count > 1)
                                                 return -EBUSY;
-                                } else if (current_async->count)
+                                } else if (current_async->port.count)
                                         return -EBUSY;
 
                                 current_async = current_async->next_port;
@@ -1578,7 +1578,7 @@ static int set_esp_config(struct esp_struct *info,
                         spin_unlock_irqrestore(&info->lock, flags);
                 } else {
                         /* DMA mode to PIO mode only */
-                        if (info->count > 1)
+                        if (info->port.count > 1)
                                 return -EBUSY;
 
                         shutdown(info);
@@ -1634,7 +1634,7 @@ static int set_esp_config(struct esp_struct *info,
                 spin_unlock_irqrestore(&info->lock, flags);
         }
 
-        if (!(info->flags & ASYNC_INITIALIZED))
+        if (!(info->port.flags & ASYNC_INITIALIZED))
                 retval = startup(info);
 
         return retval;
@@ -1917,9 +1917,9 @@ static void rs_close(struct tty_struct *tty, struct file *filp)
 
 #ifdef SERIAL_DEBUG_OPEN
         printk(KERN_DEBUG "rs_close ttys%d, count = %d\n",
-                                                info->line, info->count);
+                                                info->line, info->port.count);
 #endif
-        if (tty->count == 1 && info->count != 1) {
+        if (tty->count == 1 && info->port.count != 1) {
                 /*
                  * Uh, oh.  tty->count is 1, which means that the tty
                  * structure will be freed.  Info->count should always
@@ -1927,19 +1927,19 @@ static void rs_close(struct tty_struct *tty, struct file *filp)
                  * one, we've got real problems, since it means the
                  * serial port won't be shutdown.
                  */
-                printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->count is %d\n", info->count);
-                info->count = 1;
+                printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->port.count is %d\n", info->port.count);
+                info->port.count = 1;
         }
-        if (--info->count < 0) {
+        if (--info->port.count < 0) {
                 printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n",
-                       info->line, info->count);
-                info->count = 0;
+                       info->line, info->port.count);
+                info->port.count = 0;
         }
-        if (info->count) {
+        if (info->port.count) {
                 DBG_CNT("before DEC-2");
                 goto out;
         }
-        info->flags |= ASYNC_CLOSING;
+        info->port.flags |= ASYNC_CLOSING;
 
         spin_unlock_irqrestore(&info->lock, flags);
         /*
@@ -1958,7 +1958,7 @@ static void rs_close(struct tty_struct *tty, struct file *filp)
         /* info->IER &= ~UART_IER_RLSI; */
         info->IER &= ~UART_IER_RDI;
         info->read_status_mask &= ~UART_LSR_DR;
-        if (info->flags & ASYNC_INITIALIZED) {
+        if (info->port.flags & ASYNC_INITIALIZED) {
 
                 spin_lock_irqsave(&info->lock, flags);
                 serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK);
@@ -1981,15 +1981,15 @@ static void rs_close(struct tty_struct *tty, struct file *filp)
         rs_flush_buffer(tty);
         tty_ldisc_flush(tty);
         tty->closing = 0;
-        info->tty = NULL;
+        info->port.tty = NULL;
 
-        if (info->blocked_open) {
+        if (info->port.blocked_open) {
                 if (info->close_delay)
                         msleep_interruptible(jiffies_to_msecs(info->close_delay));
-                wake_up_interruptible(&info->open_wait);
+                wake_up_interruptible(&info->port.open_wait);
         }
-        info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
-        wake_up_interruptible(&info->close_wait);
+        info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+        wake_up_interruptible(&info->port.close_wait);
         return;
 
 out:
@@ -2047,10 +2047,10 @@ static void esp_hangup(struct tty_struct *tty)
 
         rs_flush_buffer(tty);
         shutdown(info);
-        info->count = 0;
-        info->flags &= ~ASYNC_NORMAL_ACTIVE;
-        info->tty = NULL;
-        wake_up_interruptible(&info->open_wait);
+        info->port.count = 0;
+        info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
+        info->port.tty = NULL;
+        wake_up_interruptible(&info->port.open_wait);
 }
 
 /*
@@ -2071,11 +2071,11 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
          * until it's done, and then try again.
          */
         if (tty_hung_up_p(filp) ||
-            (info->flags & ASYNC_CLOSING)) {
-                if (info->flags & ASYNC_CLOSING)
-                        interruptible_sleep_on(&info->close_wait);
+            (info->port.flags & ASYNC_CLOSING)) {
+                if (info->port.flags & ASYNC_CLOSING)
+                        interruptible_sleep_on(&info->port.close_wait);
 #ifdef SERIAL_DO_RESTART
-                if (info->flags & ASYNC_HUP_NOTIFY)
+                if (info->port.flags & ASYNC_HUP_NOTIFY)
                         return -EAGAIN;
                 else
                         return -ERESTARTSYS;
@@ -2090,7 +2090,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
          */
         if ((filp->f_flags & O_NONBLOCK) ||
             (tty->flags & (1 << TTY_IO_ERROR))) {
-                info->flags |= ASYNC_NORMAL_ACTIVE;
+                info->port.flags |= ASYNC_NORMAL_ACTIVE;
                 return 0;
         }
 
@@ -2100,20 +2100,20 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
         /*
          * Block waiting for the carrier detect and the line to become
          * free (i.e., not in use by the callout).  While we are in
-         * this loop, info->count is dropped by one, so that
+         * this loop, info->port.count is dropped by one, so that
          * rs_close() knows when to free things.  We restore it upon
          * exit, either normal or abnormal.
          */
         retval = 0;
-        add_wait_queue(&info->open_wait, &wait);
+        add_wait_queue(&info->port.open_wait, &wait);
 #ifdef SERIAL_DEBUG_OPEN
         printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n",
-               info->line, info->count);
+               info->line, info->port.count);
 #endif
         spin_lock_irqsave(&info->lock, flags);
         if (!tty_hung_up_p(filp))
-                info->count--;
-        info->blocked_open++;
+                info->port.count--;
+        info->port.blocked_open++;
         while (1) {
                 if ((tty->termios->c_cflag & CBAUD)) {
                         unsigned int scratch;
@@ -2128,9 +2128,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                 }
                 set_current_state(TASK_INTERRUPTIBLE);
                 if (tty_hung_up_p(filp) ||
-                    !(info->flags & ASYNC_INITIALIZED)) {
+                    !(info->port.flags & ASYNC_INITIALIZED)) {
 #ifdef SERIAL_DO_RESTART
-                        if (info->flags & ASYNC_HUP_NOTIFY)
+                        if (info->port.flags & ASYNC_HUP_NOTIFY)
                                 retval = -EAGAIN;
                         else
                                 retval = -ERESTARTSYS;
@@ -2144,7 +2144,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                 if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD)
                         do_clocal = 1;
 
-                if (!(info->flags & ASYNC_CLOSING) &&
+                if (!(info->port.flags & ASYNC_CLOSING) &&
                     (do_clocal))
                         break;
                 if (signal_pending(current)) {
@@ -2153,25 +2153,25 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp,
                 }
 #ifdef SERIAL_DEBUG_OPEN
                 printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n",
-                       info->line, info->count);
+                       info->line, info->port.count);
 #endif
                 spin_unlock_irqrestore(&info->lock, flags);
                 schedule();
                 spin_lock_irqsave(&info->lock, flags);
         }
         set_current_state(TASK_RUNNING);
-        remove_wait_queue(&info->open_wait, &wait);
+        remove_wait_queue(&info->port.open_wait, &wait);
         if (!tty_hung_up_p(filp))
-                info->count++;
-        info->blocked_open--;
+                info->port.count++;
+        info->port.blocked_open--;
         spin_unlock_irqrestore(&info->lock, flags);
 #ifdef SERIAL_DEBUG_OPEN
         printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n",
-               info->line, info->count);
+               info->line, info->port.count);
 #endif
         if (retval)
                 return retval;
-        info->flags |= ASYNC_NORMAL_ACTIVE;
+        info->port.flags |= ASYNC_NORMAL_ACTIVE;
         return 0;
 }
 
@@ -2204,12 +2204,12 @@ static int esp_open(struct tty_struct *tty, struct file *filp)
         }
 
 #ifdef SERIAL_DEBUG_OPEN
-        printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->count);
+        printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->port.count);
 #endif
         spin_lock_irqsave(&info->lock, flags);
-        info->count++;
+        info->port.count++;
         tty->driver_data = info;
-        info->tty = tty;
+        info->port.tty = tty;
 
         spin_unlock_irqrestore(&info->lock, flags);
 
@@ -2263,7 +2263,7 @@ static int autoconfig(struct esp_struct *info)
         int port_detected = 0;
         unsigned long flags;
 
-        if (!request_region(info->port, REGION_SIZE, "esp serial"))
+        if (!request_region(info->io_port, REGION_SIZE, "esp serial"))
                 return -EIO;
 
         spin_lock_irqsave(&info->lock, flags);
@@ -2300,7 +2300,7 @@ static int autoconfig(struct esp_struct *info)
                 }
         }
         if (!port_detected)
-                release_region(info->port, REGION_SIZE);
+                release_region(info->io_port, REGION_SIZE);
 
         spin_unlock_irqrestore(&info->lock, flags);
         return (port_detected);
@@ -2414,7 +2414,7 @@ static int __init espserial_init(void)
         offset = 0;
 
         do {
-                info->port = esp[i] + offset;
+                info->io_port = esp[i] + offset;
                 info->irq = irq[i];
                 info->line = (i * 8) + (offset / 8);
 
@@ -2425,9 +2425,9 @@ static int __init espserial_init(void)
                 }
 
                 info->custom_divisor = (divisor[i] >> (offset / 2)) & 0xf;
-                info->flags = STD_COM_FLAGS;
+                info->port.flags = STD_COM_FLAGS;
                 if (info->custom_divisor)
-                        info->flags |= ASYNC_SPD_CUST;
+                        info->port.flags |= ASYNC_SPD_CUST;
                 info->magic = ESP_MAGIC;
                 info->close_delay = 5*HZ/10;
                 info->closing_wait = 30*HZ;
@@ -2436,13 +2436,13 @@ static int __init espserial_init(void)
                 info->config.flow_off = flow_off;
                 info->config.pio_threshold = pio_threshold;
                 info->next_port = ports;
-                init_waitqueue_head(&info->open_wait);
-                init_waitqueue_head(&info->close_wait);
+                init_waitqueue_head(&info->port.open_wait);
+                init_waitqueue_head(&info->port.close_wait);
                 init_waitqueue_head(&info->delta_msr_wait);
                 init_waitqueue_head(&info->break_wait);
                 ports = info;
                 printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ",
-                        info->line, info->port, info->irq);
+                        info->line, info->io_port, info->irq);
 
                 if (info->line % 8) {
                         printk("secondary port\n");
@@ -2498,8 +2498,8 @@ static void __exit espserial_exit(void)
         put_tty_driver(esp_driver);
 
         while (ports) {
-                if (ports->port)
-                        release_region(ports->port, REGION_SIZE);
+                if (ports->io_port)
+                        release_region(ports->io_port, REGION_SIZE);
                 temp_async = ports->next_port;
                 kfree(ports);
                 ports = temp_async;