Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 509 insertions, 0 deletions

diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
new file mode 100644
index 00000000000..e83a1e2e8b1
--- /dev/null
+++ b/drivers/block/Kconfig
@@ -0,0 +1,509 @@
+#
+# Block device driver configuration
+#
+
+menu "Block devices"
+
+config BLK_DEV_FD
+        tristate "Normal floppy disk support"
+        depends on (!ARCH_S390 && !M68K && !IA64 && !UML) || Q40 || (SUN3X && BROKEN)
+        ---help---
+          If you want to use the floppy disk drive(s) of your PC under Linux,
+          say Y. Information about this driver, especially important for IBM
+          Thinkpad users, is contained in <file:Documentation/floppy.txt>.
+          That file also contains the location of the Floppy driver FAQ as
+          well as location of the fdutils package used to configure additional
+          parameters of the driver at run time.
+
+          To compile this driver as a module, choose M here: the
+          module will be called floppy.
+
+config AMIGA_FLOPPY
+        tristate "Amiga floppy support"
+        depends on AMIGA
+
+config ATARI_FLOPPY
+        tristate "Atari floppy support"
+        depends on ATARI
+
+config BLK_DEV_SWIM_IOP
+        bool "Macintosh IIfx/Quadra 900/Quadra 950 floppy support (EXPERIMENTAL)"
+        depends on MAC && EXPERIMENTAL && BROKEN
+        help
+          Say Y here to support the SWIM (Super Woz Integrated Machine) IOP
+          floppy controller on the Macintosh IIfx and Quadra 900/950.
+
+config MAC_FLOPPY
+        tristate "Support for PowerMac floppy"
+        depends on PPC_PMAC && !PPC_PMAC64
+        help
+          If you have a SWIM-3 (Super Woz Integrated Machine 3; from Apple)
+          floppy controller, say Y here. Most commonly found in PowerMacs.
+
+config BLK_DEV_PS2
+        tristate "PS/2 ESDI hard disk support"
+        depends on MCA && MCA_LEGACY && BROKEN
+        help
+          Say Y here if you have a PS/2 machine with a MCA bus and an ESDI
+          hard disk.
+
+          To compile this driver as a module, choose M here: the
+          module will be called ps2esdi.
+
+config AMIGA_Z2RAM
+        tristate "Amiga Zorro II ramdisk support"
+        depends on ZORRO
+        help
+          This enables support for using Chip RAM and Zorro II RAM as a
+          ramdisk or as a swap partition. Say Y if you want to include this
+          driver in the kernel.
+
+          To compile this driver as a module, choose M here: the
+          module will be called z2ram.
+
+config ATARI_ACSI
+        tristate "Atari ACSI support"
+        depends on ATARI && BROKEN
+        ---help---
+          This enables support for the Atari ACSI interface. The driver
+          supports hard disks and CD-ROMs, which have 512-byte sectors, or can
+          be switched to that mode. Due to the ACSI command format, only disks
+          up to 1 GB are supported. Special support for certain ACSI to SCSI
+          adapters, which could relax that, isn't included yet. The ACSI
+          driver is also the basis for certain other drivers for devices
+          attached to the ACSI bus: Atari SLM laser printer, BioNet-100
+          Ethernet, and PAMsNet Ethernet. If you want to use one of these
+          devices, you need ACSI support, too.
+
+          To compile this driver as a module, choose M here: the
+          module will be called acsi.
+
+comment "Some devices (e.g. CD jukebox) support multiple LUNs"
+        depends on ATARI && ATARI_ACSI
+
+config ACSI_MULTI_LUN
+        bool "Probe all LUNs on each ACSI device"
+        depends on ATARI_ACSI
+        help
+          If you have a ACSI device that supports more than one LUN (Logical
+          Unit Number), e.g. a CD jukebox, you should say Y here so that all
+          will be found by the ACSI driver. An ACSI device with multiple LUNs
+          acts logically like multiple ACSI devices. The vast majority of ACSI
+          devices have only one LUN, and so most people can say N here and
+          should in fact do so, because it is safer.
+
+config ATARI_SLM
+        tristate "Atari SLM laser printer support"
+        depends on ATARI && ATARI_ACSI!=n
+        help
+          If you have an Atari SLM laser printer, say Y to include support for
+          it in the kernel. Otherwise, say N. This driver is also available as
+          a module ( = code which can be inserted in and removed from the
+          running kernel whenever you want). The module will be called
+          acsi_slm. Be warned: the driver needs much ST-RAM and can cause
+          problems due to that fact!
+
+config BLK_DEV_XD
+        tristate "XT hard disk support"
+        depends on ISA
+        help
+          Very old 8 bit hard disk controllers used in the IBM XT computer
+          will be supported if you say Y here.
+
+          To compile this driver as a module, choose M here: the
+          module will be called xd.
+
+          It's pretty unlikely that you have one of these: say N.
+
+config PARIDE
+        tristate "Parallel port IDE device support"
+        depends on PARPORT
+        ---help---
+          There are many external CD-ROM and disk devices that connect through
+          your computer's parallel port. Most of them are actually IDE devices
+          using a parallel port IDE adapter. This option enables the PARIDE
+          subsystem which contains drivers for many of these external drives.
+          Read <file:Documentation/paride.txt> for more information.
+
+          If you have said Y to the "Parallel-port support" configuration
+          option, you may share a single port between your printer and other
+          parallel port devices. Answer Y to build PARIDE support into your
+          kernel, or M if you would like to build it as a loadable module. If
+          your parallel port support is in a loadable module, you must build
+          PARIDE as a module. If you built PARIDE support into your kernel,
+          you may still build the individual protocol modules and high-level
+          drivers as loadable modules. If you build this support as a module,
+          it will be called paride.
+
+          To use the PARIDE support, you must say Y or M here and also to at
+          least one high-level driver (e.g. "Parallel port IDE disks",
+          "Parallel port ATAPI CD-ROMs", "Parallel port ATAPI disks" etc.) and
+          to at least one protocol driver (e.g. "ATEN EH-100 protocol",
+          "MicroSolutions backpack protocol", "DataStor Commuter protocol"
+          etc.).
+
+source "drivers/block/paride/Kconfig"
+
+config BLK_CPQ_DA
+        tristate "Compaq SMART2 support"
+        depends on PCI
+        help
+          This is the driver for Compaq Smart Array controllers.  Everyone
+          using these boards should say Y here.  See the file
+          <file:Documentation/cpqarray.txt> for the current list of boards
+          supported by this driver, and for further information on the use of
+          this driver.
+
+config BLK_CPQ_CISS_DA
+        tristate "Compaq Smart Array 5xxx support"
+        depends on PCI
+        help
+          This is the driver for Compaq Smart Array 5xxx controllers.
+          Everyone using these boards should say Y here.
+          See <file:Documentation/cciss.txt> for the current list of
+          boards supported by this driver, and for further information
+          on the use of this driver.
+
+config CISS_SCSI_TAPE
+        bool "SCSI tape drive support for Smart Array 5xxx"
+        depends on BLK_CPQ_CISS_DA && SCSI && PROC_FS
+        help
+          When enabled (Y), this option allows SCSI tape drives and SCSI medium
+          changers (tape robots) to be accessed via a Compaq 5xxx array 
+          controller.  (See <file:Documentation/cciss.txt> for more details.)
+
+          "SCSI support" and "SCSI tape support" must also be enabled for this 
+          option to work.
+
+          When this option is disabled (N), the SCSI portion of the driver 
+          is not compiled.
+
+config BLK_DEV_DAC960
+        tristate "Mylex DAC960/DAC1100 PCI RAID Controller support"
+        depends on PCI
+        help
+          This driver adds support for the Mylex DAC960, AcceleRAID, and
+          eXtremeRAID PCI RAID controllers.  See the file
+          <file:Documentation/README.DAC960> for further information about
+          this driver.
+
+          To compile this driver as a module, choose M here: the
+          module will be called DAC960.
+
+config BLK_DEV_UMEM
+        tristate "Micro Memory MM5415 Battery Backed RAM support (EXPERIMENTAL)"
+        depends on PCI && EXPERIMENTAL
+        ---help---
+          Saying Y here will include support for the MM5415 family of
+          battery backed (Non-volatile) RAM cards.
+          <http://www.umem.com/>
+
+          The cards appear as block devices that can be partitioned into
+          as many as 15 partitions.
+
+          To compile this driver as a module, choose M here: the
+          module will be called umem.
+
+          The umem driver has not yet been allocated a MAJOR number, so
+          one is chosen dynamically.  Use "devfs" or look in /proc/devices
+          for the device number
+
+config BLK_DEV_UBD
+        bool "Virtual block device"
+        depends on UML
+        ---help---
+          The User-Mode Linux port includes a driver called UBD which will let
+          you access arbitrary files on the host computer as block devices.
+          Unless you know that you do not need such virtual block devices say
+          Y here.
+
+config BLK_DEV_UBD_SYNC
+        bool "Always do synchronous disk IO for UBD"
+        depends on BLK_DEV_UBD
+        ---help---
+          Writes to the virtual block device are not immediately written to the
+          host's disk; this may cause problems if, for example, the User-Mode
+          Linux 'Virtual Machine' uses a journalling filesystem and the host
+          computer crashes.
+
+          Synchronous operation (i.e. always writing data to the host's disk
+          immediately) is configurable on a per-UBD basis by using a special
+          kernel command line option.  Alternatively, you can say Y here to
+          turn on synchronous operation by default for all block devices.
+
+          If you're running a journalling file system (like reiserfs, for
+          example) in your virtual machine, you will want to say Y here.  If
+          you care for the safety of the data in your virtual machine, Y is a
+          wise choice too.  In all other cases (for example, if you're just
+          playing around with User-Mode Linux) you can choose N.
+
+config BLK_DEV_COW_COMMON
+        bool
+        default BLK_DEV_UBD
+
+config MMAPPER
+        tristate "Example IO memory driver (BROKEN)"
+        depends on UML && BROKEN
+        ---help---
+          The User-Mode Linux port can provide support for IO Memory
+          emulation with this option.  This allows a host file to be
+          specified as an I/O region on the kernel command line. That file
+          will be mapped into UML's kernel address space where a driver can
+          locate it and do whatever it wants with the memory, including
+          providing an interface to it for UML processes to use.
+
+          For more information, see
+          <http://user-mode-linux.sourceforge.net/iomem.html>.
+
+          If you'd like to be able to provide a simulated IO port space for
+          User-Mode Linux processes, say Y.  If unsure, say N.
+
+config BLK_DEV_LOOP
+        tristate "Loopback device support"
+        ---help---
+          Saying Y here will allow you to use a regular file as a block
+          device; you can then create a file system on that block device and
+          mount it just as you would mount other block devices such as hard
+          drive partitions, CD-ROM drives or floppy drives. The loop devices
+          are block special device files with major number 7 and typically
+          called /dev/loop0, /dev/loop1 etc.
+
+          This is useful if you want to check an ISO 9660 file system before
+          burning the CD, or if you want to use floppy images without first
+          writing them to floppy. Furthermore, some Linux distributions avoid
+          the need for a dedicated Linux partition by keeping their complete
+          root file system inside a DOS FAT file using this loop device
+          driver.
+
+          To use the loop device, you need the losetup utility, found in the
+          util-linux package, see
+          <ftp://ftp.kernel.org/pub/linux/utils/util-linux/>.
+
+          The loop device driver can also be used to "hide" a file system in
+          a disk partition, floppy, or regular file, either using encryption
+          (scrambling the data) or steganography (hiding the data in the low
+          bits of, say, a sound file). This is also safe if the file resides
+          on a remote file server.
+
+          There are several ways of encrypting disks. Some of these require
+          kernel patches. The vanilla kernel offers the cryptoloop option
+          and a Device Mapper target (which is superior, as it supports all
+          file systems). If you want to use the cryptoloop, say Y to both
+          LOOP and CRYPTOLOOP, and make sure you have a recent (version 2.12
+          or later) version of util-linux. Additionally, be aware that
+          the cryptoloop is not safe for storing journaled filesystems.
+
+          Note that this loop device has nothing to do with the loopback
+          device used for network connections from the machine to itself.
+
+          To compile this driver as a module, choose M here: the
+          module will be called loop.
+
+          Most users will answer N here.
+
+config BLK_DEV_CRYPTOLOOP
+        tristate "Cryptoloop Support"
+        select CRYPTO
+        depends on BLK_DEV_LOOP
+        ---help---
+          Say Y here if you want to be able to use the ciphers that are 
+          provided by the CryptoAPI as loop transformation. This might be
+          used as hard disk encryption.
+
+          WARNING: This device is not safe for journaled file systems like
+          ext3 or Reiserfs. Please use the Device Mapper crypto module
+          instead, which can be configured to be on-disk compatible with the
+          cryptoloop device.
+
+config BLK_DEV_NBD
+        tristate "Network block device support"
+        depends on NET
+        ---help---
+          Saying Y here will allow your computer to be a client for network
+          block devices, i.e. it will be able to use block devices exported by
+          servers (mount file systems on them etc.). Communication between
+          client and server works over TCP/IP networking, but to the client
+          program this is hidden: it looks like a regular local file access to
+          a block device special file such as /dev/nd0.
+
+          Network block devices also allows you to run a block-device in
+          userland (making server and client physically the same computer,
+          communicating using the loopback network device).
+
+          Read <file:Documentation/nbd.txt> for more information, especially
+          about where to find the server code, which runs in user space and
+          does not need special kernel support.
+
+          Note that this has nothing to do with the network file systems NFS
+          or Coda; you can say N here even if you intend to use NFS or Coda.
+
+          To compile this driver as a module, choose M here: the
+          module will be called nbd.
+
+          If unsure, say N.
+
+config BLK_DEV_SX8
+        tristate "Promise SATA SX8 support"
+        depends on PCI
+        ---help---
+          Saying Y or M here will enable support for the 
+          Promise SATA SX8 controllers.
+
+          Use devices /dev/sx8/$N and /dev/sx8/$Np$M.
+
+config BLK_DEV_UB
+        tristate "Low Performance USB Block driver"
+        depends on USB
+        help
+          This driver supports certain USB attached storage devices
+          such as flash keys.
+
+          Warning: Enabling this cripples the usb-storage driver.
+
+          If unsure, say N.
+
+config BLK_DEV_RAM
+        tristate "RAM disk support"
+        ---help---
+          Saying Y here will allow you to use a portion of your RAM memory as
+          a block device, so that you can make file systems on it, read and
+          write to it and do all the other things that you can do with normal
+          block devices (such as hard drives). It is usually used to load and
+          store a copy of a minimal root file system off of a floppy into RAM
+          during the initial install of Linux.
+
+          Note that the kernel command line option "ramdisk=XX" is now
+          obsolete. For details, read <file:Documentation/ramdisk.txt>.
+
+          To compile this driver as a module, choose M here: the
+          module will be called rd.
+
+          Most normal users won't need the RAM disk functionality, and can
+          thus say N here.
+
+config BLK_DEV_RAM_COUNT
+        int "Default number of RAM disks" if BLK_DEV_RAM
+        default "16"
+        help
+          The default value is 16 RAM disks. Change this if you know what
+          are doing. If you boot from a filesystem that needs to be extracted
+          in memory, you will need at least one RAM disk (e.g. root on cramfs).
+
+config BLK_DEV_RAM_SIZE
+        int "Default RAM disk size (kbytes)"
+        depends on BLK_DEV_RAM
+        default "4096"
+        help
+          The default value is 4096 kilobytes. Only change this if you know
+          what are you doing. If you are using IBM S/390, then set this to
+          8192.
+
+config BLK_DEV_INITRD
+        bool "Initial RAM disk (initrd) support"
+        depends on BLK_DEV_RAM=y
+        help
+          The initial RAM disk is a RAM disk that is loaded by the boot loader
+          (loadlin or lilo) and that is mounted as root before the normal boot
+          procedure. It is typically used to load modules needed to mount the
+          "real" root file system, etc. See <file:Documentation/initrd.txt>
+          for details.
+
+config INITRAMFS_SOURCE
+        string "Initramfs source file(s)"
+        default ""
+        help
+          This can be either a single cpio archive with a .cpio suffix or a
+          space-separated list of directories and files for building the
+          initramfs image.  A cpio archive should contain a filesystem archive
+          to be used as an initramfs image.  Directories should contain a
+          filesystem layout to be included in the initramfs image.  Files
+          should contain entries according to the format described by the
+          "usr/gen_init_cpio" program in the kernel tree.
+
+          When multiple directories and files are specified then the
+          initramfs image will be the aggregate of all of them.
+
+          See <file:Documentation/early-userspace/README for more details.
+
+          If you are not sure, leave it blank.
+
+config INITRAMFS_ROOT_UID
+        int "User ID to map to 0 (user root)"
+        depends on INITRAMFS_SOURCE!=""
+        default "0"
+        help
+          This setting is only meaningful if the INITRAMFS_SOURCE is
+          contains a directory.  Setting this user ID (UID) to something
+          other than "0" will cause all files owned by that UID to be
+          owned by user root in the initial ramdisk image.
+
+          If you are not sure, leave it set to "0".
+
+config INITRAMFS_ROOT_GID
+        int "Group ID to map to 0 (group root)"
+        depends on INITRAMFS_SOURCE!=""
+        default "0"
+        help
+          This setting is only meaningful if the INITRAMFS_SOURCE is
+          contains a directory.  Setting this group ID (GID) to something
+          other than "0" will cause all files owned by that GID to be
+          owned by group root in the initial ramdisk image.
+
+          If you are not sure, leave it set to "0".
+
+#XXX - it makes sense to enable this only for 32-bit subarch's, not for x86_64
+#for instance.
+config LBD
+        bool "Support for Large Block Devices"
+        depends on X86 || MIPS32 || PPC32 || ARCH_S390_31 || SUPERH || UML
+        help
+          Say Y here if you want to attach large (bigger than 2TB) discs to
+          your machine, or if you want to have a raid or loopback device
+          bigger than 2TB.  Otherwise say N.
+
+config CDROM_PKTCDVD
+        tristate "Packet writing on CD/DVD media"
+        depends on !UML
+        help
+          If you have a CDROM drive that supports packet writing, say Y to
+          include preliminary support. It should work with any MMC/Mt Fuji
+          compliant ATAPI or SCSI drive, which is just about any newer CD
+          writer.
+
+          Currently only writing to CD-RW, DVD-RW and DVD+RW discs is possible.
+          DVD-RW disks must be in restricted overwrite mode.
+
+          To compile this driver as a module, choose M here: the
+          module will be called pktcdvd.
+
+config CDROM_PKTCDVD_BUFFERS
+        int "Free buffers for data gathering"
+        depends on CDROM_PKTCDVD
+        default "8"
+        help
+          This controls the maximum number of active concurrent packets. More
+          concurrent packets can increase write performance, but also require
+          more memory. Each concurrent packet will require approximately 64Kb
+          of non-swappable kernel memory, memory which will be allocated at
+          pktsetup time.
+
+config CDROM_PKTCDVD_WCACHE
+        bool "Enable write caching"
+        depends on CDROM_PKTCDVD
+        help
+          If enabled, write caching will be set for the CD-R/W device. For now
+          this option is dangerous unless the CD-RW media is known good, as we
+          don't do deferred write error handling yet.
+
+source "drivers/s390/block/Kconfig"
+
+source "drivers/block/Kconfig.iosched"
+
+config ATA_OVER_ETH
+        tristate "ATA over Ethernet support"
+        depends on NET
+        help
+        This driver provides Support for ATA over Ethernet block
+        devices like the Coraid EtherDrive (R) Storage Blade.
+
+endmenu