sata_vsc: refactor vsc_sata_interrupt and hook up error handling

Separate sata_vsc interrupt handling into a normal (per-port) path and an
error path with the addition of vsc_port_intr and vsc_error_intr
respectively.  The error path handles interrupt based
hotplug events which requires the definition of vsc_freeze and vsc_thaw.

Note: vsc_port_intr has a workaround for unexpected interrupts that occur
during polled commands.  This fixes a regression between 2.6.19 and 2.6.20.

Changes in take2:
* removed definition of invalid fis bit
* let standard ata-error-handling handle the serror register
* clear all unhandled interrupts
* revert changes to vsc_intr_mask_update (vsc_thaw enables all interrupts)
* use unlikely() for the pci-abort and not-our-interrupt cases in vsc_sata_interrupt

Changes in take3:
* Unify the "add" + "hook-up" patches into this single patch

[htejun@gmail.com: clean up comments and suggestions]
Cc: Jeremy Higdon <jeremy@sgi.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 74 insertions, 49 deletions

diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 2fd037bde09..f0d86cbe2e5 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -98,10 +98,6 @@ enum {
                               VSC_SATA_INT_PHY_CHANGE),
 };
 
-#define is_vsc_sata_int_err(port_idx, int_status) \
-         (int_status & (VSC_SATA_INT_ERROR << (8 * port_idx)))
-
-
 static u32 vsc_sata_scr_read (struct ata_port *ap, unsigned int sc_reg)
 {
         if (sc_reg > SCR_CONTROL)
@@ -119,6 +115,28 @@ static void vsc_sata_scr_write (struct ata_port *ap, unsigned int sc_reg,
 }
 
 
+static void vsc_freeze(struct ata_port *ap)
+{
+        void __iomem *mask_addr;
+
+        mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
+                VSC_SATA_INT_MASK_OFFSET + ap->port_no;
+
+        writeb(0, mask_addr);
+}
+
+
+static void vsc_thaw(struct ata_port *ap)
+{
+        void __iomem *mask_addr;
+
+        mask_addr = ap->host->iomap[VSC_MMIO_BAR] +
+                VSC_SATA_INT_MASK_OFFSET + ap->port_no;
+
+        writeb(0xff, mask_addr);
+}
+
+
 static void vsc_intr_mask_update(struct ata_port *ap, u8 ctl)
 {
         void __iomem *mask_addr;
@@ -203,6 +221,36 @@ static void vsc_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
         }
 }
 
+static inline void vsc_error_intr(u8 port_status, struct ata_port *ap)
+{
+        if (port_status & (VSC_SATA_INT_PHY_CHANGE | VSC_SATA_INT_ERROR_M))
+                ata_port_freeze(ap);
+        else
+                ata_port_abort(ap);
+}
+
+static void vsc_port_intr(u8 port_status, struct ata_port *ap)
+{
+        struct ata_queued_cmd *qc;
+        int handled = 0;
+
+        if (unlikely(port_status & VSC_SATA_INT_ERROR)) {
+                vsc_error_intr(port_status, ap);
+                return;
+        }
+
+        qc = ata_qc_from_tag(ap, ap->active_tag);
+        if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
+                handled = ata_host_intr(ap, qc);
+
+        /* We received an interrupt during a polled command,
+         * or some other spurious condition.  Interrupt reporting
+         * with this hardware is fairly reliable so it is safe to
+         * simply clear the interrupt
+         */
+        if (unlikely(!handled))
+                ata_chk_status(ap);
+}
 
 /*
  * vsc_sata_interrupt
@@ -214,59 +262,36 @@ static irqreturn_t vsc_sata_interrupt (int irq, void *dev_instance)
         struct ata_host *host = dev_instance;
         unsigned int i;
         unsigned int handled = 0;
-        u32 int_status;
-
-        spin_lock(&host->lock);
+        u32 status;
 
-        int_status = readl(host->iomap[VSC_MMIO_BAR] +
-                           VSC_SATA_INT_STAT_OFFSET);
+        status = readl(host->iomap[VSC_MMIO_BAR] + VSC_SATA_INT_STAT_OFFSET);
 
-        for (i = 0; i < host->n_ports; i++) {
-                if (int_status & ((u32) 0xFF << (8 * i))) {
-                        struct ata_port *ap;
+        if (unlikely(status == 0xffffffff || status == 0)) {
+                if (status)
+                        dev_printk(KERN_ERR, host->dev,
+                                ": IRQ status == 0xffffffff, "
+                                "PCI fault or device removal?\n");
+                goto out;
+        }
 
-                        ap = host->ports[i];
+        spin_lock(&host->lock);
 
-                        if (is_vsc_sata_int_err(i, int_status)) {
-                                u32 err_status;
-                                printk(KERN_DEBUG "%s: ignoring interrupt(s)\n", __FUNCTION__);
-                                err_status = ap ? vsc_sata_scr_read(ap, SCR_ERROR) : 0;
-                                vsc_sata_scr_write(ap, SCR_ERROR, err_status);
-                                handled++;
-                        }
+        for (i = 0; i < host->n_ports; i++) {
+                u8 port_status = (status >> (8 * i)) & 0xff;
+                if (port_status) {
+                        struct ata_port *ap = host->ports[i];
 
                         if (ap && !(ap->flags & ATA_FLAG_DISABLED)) {
-                                struct ata_queued_cmd *qc;
-
-                                qc = ata_qc_from_tag(ap, ap->active_tag);
-                                if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
-                                        handled += ata_host_intr(ap, qc);
-                                else if (is_vsc_sata_int_err(i, int_status)) {
-                                        /*
-                                         * On some chips (i.e. Intel 31244), an error
-                                         * interrupt will sneak in at initialization
-                                         * time (phy state changes).  Clearing the SCR
-                                         * error register is not required, but it prevents
-                                         * the phy state change interrupts from recurring
-                                         * later.
-                                         */
-                                        u32 err_status;
-                                        err_status = vsc_sata_scr_read(ap, SCR_ERROR);
-                                        printk(KERN_DEBUG "%s: clearing interrupt, "
-                                               "status %x; sata err status %x\n",
-                                               __FUNCTION__,
-                                               int_status, err_status);
-                                        vsc_sata_scr_write(ap, SCR_ERROR, err_status);
-                                        /* Clear interrupt status */
-                                        ata_chk_status(ap);
-                                        handled++;
-                                }
-                        }
+                                vsc_port_intr(port_status, ap);
+                                handled++;
+                        } else
+                                dev_printk(KERN_ERR, host->dev,
+                                        ": interrupt from disabled port %d\n", i);
                 }
         }
 
         spin_unlock(&host->lock);
-
+out:
         return IRQ_RETVAL(handled);
 }
 
@@ -304,8 +329,8 @@ static const struct ata_port_operations vsc_sata_ops = {
         .qc_prep                = ata_qc_prep,
         .qc_issue               = ata_qc_issue_prot,
         .data_xfer              = ata_data_xfer,
-        .freeze                 = ata_bmdma_freeze,
-        .thaw                   = ata_bmdma_thaw,
+        .freeze                 = vsc_freeze,
+        .thaw                   = vsc_thaw,
         .error_handler          = ata_bmdma_error_handler,
         .post_internal_cmd      = ata_bmdma_post_internal_cmd,
         .irq_handler            = vsc_sata_interrupt,