Blackfin arch: remove pata resources from generic board

these are highly board specific, so putting into generic doesnt make much sense

Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>

8 files changed, 0 insertions, 322 deletions

diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 749f4a806b5..d22bc777371 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -39,7 +39,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/pata_platform.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -799,43 +798,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT        55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-        .ioport_shift = 1,
-        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-        {
-                .start = 0x20314020,
-                .end = 0x2031403F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = 0x2031401C,
-                .end = 0x2031401F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = PATA_INT,
-                .end = PATA_INT,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device bfin_pata_device = {
-        .name = "pata_platform",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(bfin_pata_resources),
-        .resource = bfin_pata_resources,
-        .dev = {
-                .platform_data = &bfin_pata_platform_data,
-        }
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -961,10 +923,6 @@ static struct platform_device *stamp_devices[] __initdata = {
         &bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        &bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
         &bfin_device_gpiokeys,
 #endif
@@ -987,10 +945,6 @@ static int __init stamp_init(void)
 
         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
         return 0;
 }
 
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index cbd47bce689..762f754c06c 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -825,43 +824,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT        55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-        .ioport_shift = 1,
-        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-        {
-                .start = 0x20314020,
-                .end = 0x2031403F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = 0x2031401C,
-                .end = 0x2031401F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = PATA_INT,
-                .end = PATA_INT,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device bfin_pata_device = {
-        .name = "pata_platform",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(bfin_pata_resources),
-        .resource = bfin_pata_resources,
-        .dev = {
-                .platform_data = &bfin_pata_platform_data,
-        }
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -996,10 +958,6 @@ static struct platform_device *stamp_devices[] __initdata = {
         &bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        &bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
         &bfin_device_gpiokeys,
 #endif
@@ -1022,10 +980,6 @@ static int __init stamp_init(void)
 
         platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
         return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index cecbc624e3d..c66a68f3023 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 
 #include <asm/dma.h>
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index dfccf826fa3..575843f6d9e 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -36,7 +36,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -307,43 +306,6 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT        38
-
-static struct pata_platform_info bfin_pata_platform_data = {
-        .ioport_shift = 2,
-        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-        {
-                .start = 0x2030C000,
-                .end = 0x2030C01F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = 0x2030D018,
-                .end = 0x2030D01B,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = PATA_INT,
-                .end = PATA_INT,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device bfin_pata_device = {
-        .name = "pata_platform",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(bfin_pata_resources),
-        .resource = bfin_pata_resources,
-        .dev = {
-                .platform_data = &bfin_pata_platform_data,
-        }
-};
-#endif
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
         VRPAIR(VLEV_085, 250000000),
@@ -403,10 +365,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
         &bfin_spi0_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        &bfin_pata_device,
-#endif
 };
 
 static int __init cm_bf533_init(void)
@@ -416,10 +374,6 @@ static int __init cm_bf533_init(void)
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
         return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 6a34f1519c0..cc2e7eeb1d5 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -37,7 +37,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -255,43 +254,6 @@ static struct platform_device bfin_sir_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT        55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-        .ioport_shift = 1,
-        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-        {
-                .start = 0x20314020,
-                .end = 0x2031403F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = 0x2031401C,
-                .end = 0x2031401F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = PATA_INT,
-                .end = PATA_INT,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device bfin_pata_device = {
-        .name = "pata_platform",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(bfin_pata_resources),
-        .resource = bfin_pata_resources,
-        .dev = {
-                .platform_data = &bfin_pata_platform_data,
-        }
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -404,10 +366,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
         &bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        &bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
         &bfin_device_gpiokeys,
 #endif
@@ -424,10 +382,6 @@ static int __init ezkit_init(void)
         printk(KERN_INFO "%s(): registering device resources\n", __func__);
         platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
         return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index d10b2dc5902..050ffca5353 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <asm/dma.h>
@@ -404,43 +403,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT        55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-        .ioport_shift = 1,
-        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-        {
-                .start = 0x20314020,
-                .end = 0x2031403F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = 0x2031401C,
-                .end = 0x2031401F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = PATA_INT,
-                .end = PATA_INT,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device bfin_pata_device = {
-        .name = "pata_platform",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(bfin_pata_resources),
-        .resource = bfin_pata_resources,
-        .dev = {
-                .platform_data = &bfin_pata_platform_data,
-        }
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -583,10 +545,6 @@ static struct platform_device *stamp_devices[] __initdata = {
         &bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        &bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
         &bfin_device_gpiokeys,
 #endif
@@ -625,10 +583,6 @@ static int __init stamp_init(void)
 #endif
 
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
         return 0;
 }
 
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
index f5bc9258f83..78a13d5bfd5 100644
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ b/arch/blackfin/mach-bf537/boards/generic_board.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/usb/sl811.h>
@@ -619,43 +618,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT        55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-        .ioport_shift = 1,
-        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-        {
-                .start = 0x20314020,
-                .end = 0x2031403F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = 0x2031401C,
-                .end = 0x2031401F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = PATA_INT,
-                .end = PATA_INT,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device bfin_pata_device = {
-        .name = "pata_platform",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(bfin_pata_resources),
-        .resource = bfin_pata_resources,
-        .dev = {
-                .platform_data = &bfin_pata_platform_data,
-        }
-};
-#endif
-
 static struct platform_device *stamp_devices[] __initdata = {
 #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
         &bfin_pcmcia_cf_device,
@@ -717,10 +679,6 @@ static struct platform_device *stamp_devices[] __initdata = {
         &bfin_sport0_uart_device,
         &bfin_sport1_uart_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        &bfin_pata_device,
-#endif
 };
 
 static int __init stamp_init(void)
@@ -732,9 +690,6 @@ static int __init stamp_init(void)
                                 ARRAY_SIZE(bfin_spi_board_info));
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
         return 0;
 }
 
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 2affbdf2fb4..50b4cdceccf 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -35,7 +35,6 @@
 #include <linux/spi/spi.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
-#include <linux/ata_platform.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
 #include <asm/portmux.h>
@@ -350,43 +349,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 #endif
 };
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT        55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-        .ioport_shift = 1,
-        .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-        {
-                .start = 0x20314020,
-                .end = 0x2031403F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = 0x2031401C,
-                .end = 0x2031401F,
-                .flags = IORESOURCE_MEM,
-        },
-        {
-                .start = PATA_INT,
-                .end = PATA_INT,
-                .flags = IORESOURCE_IRQ,
-        },
-};
-
-static struct platform_device bfin_pata_device = {
-        .name = "pata_platform",
-        .id = -1,
-        .num_resources = ARRAY_SIZE(bfin_pata_resources),
-        .resource = bfin_pata_resources,
-        .dev = {
-                .platform_data = &bfin_pata_platform_data,
-        }
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -499,10 +461,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
         &bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        &bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
         &bfin_device_gpiokeys,
 #endif
@@ -538,10 +496,6 @@ static int __init ezkit_init(void)
 #endif
 
         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-        irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
         return 0;
 }