sh: Fix up cf-enabler dependency for SE boards.

This was using CONFIG_SH_SOLUTION_ENGINE, where we really wanted
CONFIG_SOLUTION_ENGINE. While we're at it, move the whole CF
enabler mess somewhere better suited.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 43 insertions, 44 deletions

diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index b16407c9f2c..924efe5b8c2 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -404,50 +404,6 @@ source "arch/sh/boards/renesas/hs7751rvoip/Kconfig"
 source "arch/sh/boards/renesas/rts7751r2d/Kconfig"
 source "arch/sh/boards/renesas/r7780rp/Kconfig"
 
-config CF_ENABLER
-        bool "Compact Flash Enabler support"
-        depends on SH_SOLUTION_ENGINE || SH_SH03
-        ---help---
-          Compact Flash is a small, removable mass storage device introduced
-          in 1994 originally as a PCMCIA device.  If you say `Y' here, you
-          compile in support for Compact Flash devices directly connected to
-          a SuperH processor.  A Compact Flash FAQ is available at
-          <http://www.compactflash.org/faqs/faq.htm>.
-
-          If your board has "Directly Connected" CompactFlash at area 5 or 6,
-          you may want to enable this option.  Then, you can use CF as
-          primary IDE drive (only tested for SanDisk).
-
-          If in doubt, select 'N'.
-
-choice
-        prompt "Compact Flash Connection Area"
-        depends on CF_ENABLER
-        default CF_AREA6
-
-config CF_AREA5
-        bool "Area5"
-        help
-          If your board has "Directly Connected" CompactFlash, You should
-          select the area where your CF is connected to.
-
-          - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
-          - "Area6" if it is connected to Area 6 (0x18000000)
-
-          "Area6" will work for most boards.
-
-config CF_AREA6
-        bool "Area6"
-
-endchoice
-
-config CF_BASE_ADDR
-        hex
-        depends on CF_ENABLER
-        default "0xb8000000" if CF_AREA6
-        default "0xb4000000" if CF_AREA5
-
-
 menu "Timer and clock configuration"
 
 config SH_TMU
@@ -705,6 +661,49 @@ config SUPERHYWAY
         tristate "SuperHyway Bus support"
         depends on CPU_SUBTYPE_SH4_202
 
+config CF_ENABLER
+        bool "Compact Flash Enabler support"
+        depends on SOLUTION_ENGINE || SH_SH03
+        ---help---
+          Compact Flash is a small, removable mass storage device introduced
+          in 1994 originally as a PCMCIA device.  If you say `Y' here, you
+          compile in support for Compact Flash devices directly connected to
+          a SuperH processor.  A Compact Flash FAQ is available at
+          <http://www.compactflash.org/faqs/faq.htm>.
+
+          If your board has "Directly Connected" CompactFlash at area 5 or 6,
+          you may want to enable this option.  Then, you can use CF as
+          primary IDE drive (only tested for SanDisk).
+
+          If in doubt, select 'N'.
+
+choice
+        prompt "Compact Flash Connection Area"
+        depends on CF_ENABLER
+        default CF_AREA6
+
+config CF_AREA5
+        bool "Area5"
+        help
+          If your board has "Directly Connected" CompactFlash, You should
+          select the area where your CF is connected to.
+
+          - "Area5" if CompactFlash is connected to Area 5 (0x14000000)
+          - "Area6" if it is connected to Area 6 (0x18000000)
+
+          "Area6" will work for most boards.
+
+config CF_AREA6
+        bool "Area6"
+
+endchoice
+
+config CF_BASE_ADDR
+        hex
+        depends on CF_ENABLER
+        default "0xb8000000" if CF_AREA6
+        default "0xb4000000" if CF_AREA5
+
 source "arch/sh/drivers/pci/Kconfig"
 
 source "drivers/pci/Kconfig"